Укр|Eng|Рус
Ukraine
Catalog   /   Photo   /   Digital Cameras

Comparison Sony ZV-E10 kit 16-50 vs Sony A6000 kit 16-50

Add to comparison
Sony ZV-E10  kit 16-50
Sony A6000  kit 16-50
Sony ZV-E10 kit 16-50Sony A6000 kit 16-50
Compare prices 30
from 28 099 ₴
Expecting restock
User reviews
0
1
0
0
TOP sellers
Main
Luminous optics. Rate of fire 24 fps. Advanced autofocus. Video shooting in 4K. effective stabilizer. High speed video recording. Super Slow-Motion 1000 fps.
Fast and tenacious autofocus. High rate of fire. Electronic viewfinder. Developed ergonomics. Tilt display.
Camera type"mirrorless" (MILC)"mirrorless" (MILC)
DxOMark rating82
Sensor
SensorCMOS (CMOS)
CMOS (CMOS) /bionz-X processor/
Sensor sizeAPS-C (23x15.5 mm)APS-C (23x15.5 mm)
Total MP2524.7
Effective MP number2424.3
Maximum image size6000х4000 px6000x4000 px
Light sensitivity (ISO)
100-32000 /iSO 50-51200 available in selected modes/
100-25600 /hardware ISO up to 51200 possible/
RAW format recording
Lens
Mount (bayonet)Sony ESony E
Kit lens
Aperturef/3.5 - f/5.6f/3.5 - f/5.6
Focal length16 - 50 mm16 - 50 mm
Optical zoom3.1
Manual focus
Image stabilizationelectronicis absent
Photo shooting
Number of scene programs615
Frames per series (JPEG)137 шт
Frames per series (RAW)46 шт
Frames per series (JPEG RAW)43 шт
HDR
White balance measuring
Exposure compensation± 5 EV, in 1/2 or 1/3 EV increments± 5 EV, in 1/2 or 1/3 EV increments
Auto bracketing
 /± 5 (3.5 frames in steps of 1/3 EV, 1/2 EV, 2/3 EV, 1 EV, 2 EV)/
 /± 5 (3.5 frames at 1/3 EV, 1/2 EV, 2/3 EV, 1 EV, 2 EV steps)/
Exposure modes
auto
shutter priority
aperture priority
manual mode
auto
shutter priority
aperture priority
manual mode
Metering system
point
centre-weighted
sensor (estimated)
point
centre-weighted
sensor (estimated)
Video recording
Full HD (1080)1920x1080 pix 120 fps1920x1080 pix 60 fps
Ultra HD (4K)3840x2160 pix 30 fps
File recording formats
MPEG-4, AVCHD, XAVC S /H.264/
MPEG-4, AVCHD
Manual video focus
Connection ports
USB C
HDMI v 2.0
headphone Jack
microphone Jack
 
HDMI v 1.4
 
 
Focus
Autofocus modes
one shot
AI focus
tracking
in face
by smile
animal in frame
one shot
 
tracking
in face
 
 
Focus points425 шт179 шт
Touch focus
Viewfinder and shutter
Viewfinderis absent
electronic /magnification 0.7x, 1440k dots/
Frame coverage100 %
Shutter speed30 - 1/4000 sec30 - 1/4000 sec
Continuous shooting11 fps11 fps
Shutter typemechanicalmechanical
Screen
Screen size3 ''3 ''
Screen resolution921 thousand pixels921 thousand pixels
Touch screen
Rotary display
Memory and communications
Memory cards typesSD, SDHC, SDXC, MemoryStick
SD, SDHC, SDXC /MS Pro Duo, MS Pro-HG Duo, MS Pro-HG HX Duo/
Communications
Wi-Fi
Bluetooth
NFC
smartphone control
Wi-Fi 4 (802.11n)
 
NFC
 
Flash
Built-in flash
Application range6 m
External flash connect
flash X-sync1/160 sec
Power source
Power source
battery
battery
Battery modelNP-FW50NP-FW50
Battery capacity1080 mAh
Shots per charge440 шт360 шт
General
Case/case modelLCS-EBC, LCS-EJA
Charger modelAC-PW20BC-QM1
Console/synchronizer modelRM-VPR1, RMT-DSLR2
Materialplasticaluminium/plastic
Dimensions (WxHxD)115х64х45 mm120х67х45 mm
Weight343 g921 g
Color
Added to E-Catalogaugust 2021february 2014

DxOMark rating

The result shown by the camera in the DxOMark ranking.

DxOMark is one of the most popular and respected resources for expert camera testing. According to the test results, the camera receives a certain number of points; The more points, the higher the final score.

Total MP

The total number of individual light sensitive dots (pixels) provided in the camera's sensor. Denoted in megapixels - millions of pixels.

The total number of MPs, as a rule, is greater than the number of megapixels from which the frame is directly built (for more details, see "Effective number of MPs"). This is due to the presence of service areas on the matrix. In general, this parameter is more of a reference than practically significant: a larger total number of MPs with the same size and effective resolution means a slightly smaller size of each pixel, and, accordingly, an increased likelihood of noise (especially at high ISO values).

Effective MP number

The number of pixels (megapixels) of the matrix directly involved in the construction of the image, in fact — the number of points from which the captured image is built. Some manufacturers, in addition to this parameter, also indicate the total number of MPs, taking into account the service areas of the matrix. However, it is the effective number of MPs that is considered the main indicator — it is this that directly affects the maximum resolution of the resulting image (see “Maximum image size”).

A megapixel is 1 million pixels. Numerous megapixels ensures high resolution of the captured photos, but is not a guarantee of high-quality images — much also depends on the size of the sensor, its light sensitivity (see the relevant glossary items), as well as hardware and software image processing tools used in the camera. Note that for small matrices, high resolution can sometimes be more of an evil than a blessing — such sensors are very prone to the appearance of noise in the image.

Maximum image size

The maximum size of photos taken by the camera in normal (non-panoramic) mode. In fact, this paragraph indicates the highest resolution of photography — in pixels vertically and horizontally, for example, 3000x4000. This indicator directly depends on the resolution of the matrix: the number of dots in the image cannot exceed the effective number of megapixels (see above). For example, for the same 3000x4000, the matrix must have an effective resolution of at least 3000*4000 = 12 million dots, that is, 12 MP.

Theoretically, the larger the size of the photo, the more detailed the image, the more small details can be conveyed on it. At the same time, the overall image quality (including the visibility of fine details) depends not only on resolution, but also on a number of other technical and software factors; see "Effective MP number" for more details.

Light sensitivity (ISO)

The sensitivity range of a digital camera matrix. In digital photography, light sensitivity is expressed in the same ISO units as in film photography; however, unlike film, the light sensitivity of the sensor in a digital camera can be changed, which gives you more options for adjusting shooting parameters. High maximum light sensitivity is important if you have to use a lens with a low aperture (see Aperture), as well as when shooting dimly lit scenes and fast-moving objects; in the latter case, high ISO allows you to use low shutter speeds, which minimizes image blur. However, note that with an increase in the value of the applied ISO, the level of noise in the resulting images also increases.

Optical zoom

The magnification factor provided by the camera by using the capabilities of the lens (namely, by changing its focal length). In models with interchangeable lenses (see “Camera type”), indicated for the complete lens, if available.

Note that in this case the magnification is indicated not relative to the image visible to the naked eye, but relative to the image produced by the lens at minimum magnification. For example, if the characteristics indicate an optical zoom of 3x, this means that at the maximum magnification, objects in the frame will be three times larger than at the minimum.

The degree of optical zoom is directly related to the range of focal lengths (see above). You can determine this degree by dividing the maximum focal length of the lens by the minimum, for example 360mm / 36mm=10x magnification.

To date, optical zoom provides the best "close" image quality and is considered to be superior to digital zoom (see below). This is due to the fact that with this format of work, the entire area of \u200b\u200bthe matrix is constantly involved, which allows you to fully use its capabilities. Therefore, even among low-cost models, devices without optical zoom are very rare.

Image stabilization

An image stabilization method provided by the camera. Note that systems of the optical type and with a sensor shift are sometimes combined under the term "true" stabilization - due to their effectiveness. See below for more on this.

By itself, stabilization (regardless of the principle of operation) allows you to compensate for the effect of "shake" with an unstable camera position - especially when shooting handheld. This is especially true when shooting with a significant increase or at slow shutter speeds. However, in any case, this function reduces the risk of spoiling the frame, so cameras with stabilization are extremely common. The principles of work can be as follows:

— Electronic. Stabilization, carried out due to a kind of "reserve" - a section along the edges of the sensor, which initially does not participate in the formation of the final image. However, if the camera electronics detect fluctuations, it compensates for them by selecting the necessary image fragments from the reserve. Electronic systems are extremely simple, compact, reliable and at the same time inexpensive. However, for their work it is necessary to allocate a fairly significant part of the sensor - and reducing the usable area of the sensor increases the noise level and degrades the image quality. And in some models, electronic stabilization is turned on only at lower resolutions and is not available...at full frame size. Therefore, in its pure form, this option is found mainly in relatively inexpensive cameras with non-replaceable lenses.

- Optical. Stabilization, carried out when light passes through the lens, is due to a system of movable lenses and gyroscopes. As a result, the image hits the sensor already stabilized, and the entire sensor area can be used for it. Therefore, optical systems, despite the complexity and rather high cost, are considered more preferable for high-quality filming than electronic ones. Separately, we note that in SLR and MILC cameras (see "Camera Type") the availability of this function depends on the lens installed; therefore, for such models, optical stabilization is not indicated in our catalog in principle (even if the complete lens is equipped with a stabilizer).

- With sensor shift. Stabilization, carried out by shifting the sensor "following" the shifted image. Like the optical one described above, it is considered a fairly advanced option, although in general it is somewhat less effective. On the other hand, systems with a sensor shift have serious advantages - first of all, the fact that such stabilization will work regardless of the characteristics of the lens. For cameras with fixed lenses, this means that the lens can do without an optical stabilizer and make the optics simpler, cheaper and more reliable. In SLR and MILC cameras, the sensor shift makes it possible to use even “non-stabilized” lenses with convenience, and when installing “stabilized” optics, both systems work together, and their efficiency is very high. In addition, sensor shift is somewhat simpler and cheaper than traditional optical stabilizers.

— Optical and electronic. Stabilization that combines both of the options described above: initially it operates according to the optical principle, and when the capabilities of the lens are not enough, an electronic system is connected. This improves the overall efficiency compared to purely optical or purely electronic stabilizers. On the other hand, the disadvantages of both options in such systems are also combined: the optics are relatively complex and expensive, and not all of the sensor is involved. Therefore, such a combination is rare, mainly in separate advanced digital compacts.

- With sensor shift and electronic. Another type of combined stabilization systems. Like “optical + electronic”, it improves the overall stabilization efficiency, but at the same time it combines the disadvantages of the two methods (they are also similar: the complication and rise in price of the camera, plus a decrease in the useful area of \u200b\u200bthe sensor). Therefore, this option is used extremely rarely - in single models of digital ultrazooms and advanced compacts.

Number of scene programs

The number of scene programs provided in the camera design.

Scene programs are preset settings for some of the most common shooting scenes - for example, Portrait, Landscape, Sports, Sunset, etc. In addition to these presets, this list may include special effects and creative tools (such as color swap or fisheye), as well as exposure modes (see below). The presence of scene programs is especially useful for beginners and non-professional photographers, as it eliminates the need to tinker with each setting separately - just select the most suitable program, and all the necessary settings will be set automatically. The more scene programs the camera design provides, the wider its automatic adjustment capabilities.

Frames per series (JPEG)

The highest number of shots a camera can capture “in one go” in JPEG continuous shooting.

The technical features of modern digital cameras are such that during continuous shooting, photos have to be recorded in a special buffer, and only then, after the end of the series, they can be copied to a memory card. This buffer has a limited size, so the number of frames in one series is also limited. At the same time, we note that this indicator is usually indicated for shooting at the highest possible resolution (see "Maximum image size"); at lower resolutions, the volume of each image is reduced, and the number of frames in the series may turn out to be more than stated in the specifications.

JPEG, the most popular digital photography format today, is smaller and requires less processing power than RAW (see "Recording in RAW Format"). Therefore, in a JPEG series, as a rule, more frames are available to the photographer. However, in some models that have two separate buffers (for RAW and JPEG), it may be the other way around.
Price graph
Sony ZV-E10 often compared
Sony A6000 often compared