Comparison Terra Incognita TopRock 2 vs Terra Incognita Ksena 2

Classic tourist tents are divided into three main varieties: expeditionary, trekking and camping. In addition, on the market you can find tents for the beach, for fishing(including carp tents) and for shower / toilet, models like "umbrella", as well as varieties of tents: camping and tent tents. Here is a more detailed description of each of these varieties:

— Expeditionary. The most advanced type of camping tents. Expeditionary models can be used in any season, including winter, they are distinguished by high strength, reliability and maximum protection against cold, snow, wind, etc., while such properties are often combined with extremely low weight. As the name implies, these tents are designed mainly for long-distance expeditions, winter hiking, high-mountain climbing and other similar applications. But it hardly makes sense to purchase such a model for relatively simple tasks: expeditionary equipment is very expensive.

— Tracking. Tents designed primarily for ease of use on long hiking and cycling trips. Accordingly, the key features of such models are rather high reliability and resistance...to adverse conditions (albeit less than that of expeditionary equipment), a relatively low level of comfort, as well as low weight, in most models not exceeding 6 kg. Heavier tents are usually classified as trekking tents if they have the simplest possible design, and the weight is primarily due to the large capacity and/or increased reliability of the materials. In general, it is worth paying attention to this variety in cases where the equipment is planned to be carried “on oneself” often and for a long time; camping tents are better suited for staying in one place permanently (see below).

— Camping. Tents designed primarily for comfort while staying in one place all the time. They differ from tracking models in more extensive additional features (although a specific set of such features may differ from product to product), seasonality (most of them are not designed for winter), and also, in general, greater weight. So, it is customary to refer to camping tents weighing more than 6 kg; lighter models may also be included in this category if they have the characteristic features of camping equipment: additional features designed to increase comfort levels and/or relatively simple materials that are not designed for particularly adverse conditions. In general, tents of this type are perfect for overnight picnics, outdoor festivals, etc.

— Tent for fishing. Products for winter ice fishing; they are designed for one, maximum two people in a sitting position and most often either do not have a bottom at all, or they have special openings in the bottom so that the structure can be installed directly above the hole.

— Carp tent. Models intended mainly for lovers of carp fishing. Such fishing (especially at competitions) can last for days without interruption, and special equipment is used for it — including the so-called carp folding beds, which are a special kind of tourist furniture. Thus, awnings for carp fishing are large in size, allowing you to easily install one or even several folding beds inside. And by design, most of these products are no longer closer to awnings, but to full-fledged tourist tents: they can be used not only as canopies, but also as full-fledged closed shelters, including for overnight stays.

— For a shower/toilet. Tents designed exclusively for equipping camp showers or toilets; they are not designed for other purposes. Usually they are vertical structures without a bottom — a kind of cabin for one person. The height of such a booth is usually chosen so that an adult can stand inside without much difficulty (in some models, the height exceeds 2 m).

— Beach tent. Tents designed to protect from the sun's rays on the beaches, during picnics, etc. Most of these products are structures that are open on one or even several sides, and are designed for a seated or recumbent placement of a person. There are also models equipped with a valve that allows you to completely close the internal volume; this can be useful, for example, for changing clothes on the beach, or for protection from a short rain. However, even such models are designed mainly for open use — moreover, the valve, being unfastened, fits in front of the entrance and plays the role of an addition to the tent's own bottom.

— Car. The vast majority of tents are mounted on the roof of a vehicle. They provide car tourists with sleeping places on a kind of elevation, which guarantees the almost complete absence of any creeping living creatures during the night. Car tents are attached to the roof rails or crossbars of the roof rack of the car, the entrance to them is usually realized with the help of an attached ladder. There are models exactly in the entire plane of the roof of the vehicle and instances of autotents of an increased “square” with a rigid floor frame. There are also tents that are attached to the trunk of a car or the front door of a van, forming the so-called vestibule space. In the "tambour" you can leave things or put a table, while sleeping is supposed to be directly in the passenger compartment of the vehicle, folding the rear row of seats. Car tents give you the freedom to choose where to spend the night, whether it's a clearing at the edge of a forest, a flat area in a mountainous area, or a parking lot near a supermarket.

— Umbrella tent. Tents, the design of which resembles an oversized umbrella. When unfolded, such a tent consists of a dome, in which a special frame is built, and a canopy hanging from the edges of the dome; while the layout of the "umbrellas" may be different. So, in some models, the dome is located on a rather high vertical leg-support, and in the standard position, the height of the canopy is the same on all sides. In terms of application, such models are closest to awnings-tents (see above), and by turning up the canopy, you can turn the product into a classic beach umbrella. In others, the dome is installed obliquely and rests on the ground with one edge, covering part of the space on the sides, and the remaining space closes the canopy; such designs are more like traditional tents. Anyway, the main advantage of umbrella tents is the ease of installation and folding: such operations are not much more complicated than handling an ordinary umbrella, and even a beginner can handle them without much difficulty. On the other hand, when assembled, such products are rather bulky, and the complexity of the design affects the cost and overall reliability. Therefore, there are few such models nowadays.

— Tent tent. There are two main types of awnings. The first is an enlarged and lightweight analogue of more traditional tourist tents. The height of such a product, usually, allows you to stand in it, the bottom in the structure may be completely absent, the walls are single-layer, and most of their area is usually occupied by “windows” made of mosquito nets (although in some models it is possible to close these windows with external “curtains”). » made of dense material). Such an awning can be useful, for example, for short trips to nature, or as an overnight stay in warm summer weather.
Another kind of awnings-tents can be conditionally called "household". Such structures are intended primarily for the organization of one or another working space: retail outlets, exhibition and promotional stands, field cafes and canteens, administrative areas at public events, first-aid posts, etc. Among such tents there are quite large structures that can accommodate 10 – 20 people, or even more; such models, usually, have solid walls with inserts-"windows" made of transparent material. In turn, for relatively small household products, the walls are rather symbolic — they are made of mesh material, if necessary, closed with a zipper, and in some models they are completely absent.

— Camping tent. The simplest kind of awnings are products in the form of a piece of dense matter, usually rectangular or close to it in shape. Many camping tents are designed to be secured between trees, poles, or other makeshift supports. Such an installation can be quite difficult, but the awning itself is as light, compact and easy to transport as possible. More advanced models are also produced, equipped with their own supports and guy wires and suitable for installation directly on the ground. Anyway, camping awnings themselves are intended primarily for protection from the sun and, to a much lesser extent, from rain. In addition, such products can be used as additional protection for tents — in heavy rain, an awning can be a real salvation, especially if the tent itself is single-layer and not particularly moisture resistant.

The total weight of the tent is including the frame and other accessories.

This parameter depends primarily on the purpose (see above), and after that — on seasonality, capacity, and additional functions. For example, in trekking and expedition models, the weight usually does not exceed 5 – 7.5 kg, and the lightest of these products can weigh 2 – 3 kg or even less, while being full-fledged tents for 2 people or even more. However, for a trekking tent, such a small weight with a capacity of more than 2 people usually means that this model is designed exclusively for the summer. For most camping tents, the weight starts at 6 kg, although among them there are also quite light products — by 4 – 5 kg, 3 – 4 kg, or even less (in such cases, light weight can also mean a purely summer specialization). And the most capacious and/or multifunctional models can have a weight of 10 – 15 kg, 15 – 20 kg and even more; in this weight category, you can mainly find tents, camping tents for many people and fishing tents for carp fishing (see "Destination").

When choosing a tent according to this indicator, it is worth considering that it does not always make sense to chase the maximum we...ight reduction. Yes, the light tent is the most convenient to carry; on the other hand, weight reduction inevitably affects one or several other characteristics at once. So, most often, lighter models are either more expensive or smaller in size and less roomy and functional than their heavier counterparts. And sometimes weight reduction also negatively affects the security (including moisture resistance) and the overall reliability of the product. Therefore, it makes sense to specifically look for the lightest tent possible in cases where weight reduction is of key importance; a typical example is long trips, in which all the equipment has to be carried “on oneself” for a long time. And even in such cases, it is worth remembering other important characteristics. For example, for use in late autumn, when frosts are likely, it is better to choose a heavier tent with winter seasonality than a light model that is not designed for winter conditions.

The vestibule is a kind of "entrance hall" in front of the entrance to the main compartment (s) of the tent.

The specific design and purpose of such a "hallway" may be different. So, in small two-layer tents, the space between the inner and outer layers in front of the entrance plays the role of a vestibule (for this, the outer canopy is stretched at a greater angle relative to the vertical than the inner one). The dimensions of such a compartment are small, it is designed mainly for storing individual items, such as shoes. In larger models, the vestibule is made in the form of a full-fledged compartment, which differs from the main compartment only in the absence of a bottom (although there are exceptions). Such a compartment can be located between two sleeping compartments; and in some tents two vestibules are provided at once.

Anyway, such equipment increases the useful area of \u200b\u200bthe tent and provides additional comfort when using it. Tambour can be used to store equipment, often quite bulky; with an open entrance, it provides additional protection for the main volume of the tent from rain, sun and wind; and in a large vestibule(150 cm long or more), you can even organize additional sleeping places (if the weather permits) or even an auxiliary room such as a kitchen, dining room, administrative area, etc. " below.

The length of the vestibule provided in the tent.

See above for more details on the vestibule. As for its dimensions, the length of the vestibule is measured along the same side along which the length of the entire tent is measured; and the width of this compartment usually corresponds to the overall width of the tent, and it does not need to be specified separately in the specifications. At the same time, we note that due to such measurement rules, the length of the vestibule is often less than its width; this is quite normal in this case.

The specific ratio between the dimensions of this compartment in different tents may be different. However, in general, a longer vestibule is usually larger and more capacious than a shorter one. When choosing, it should be taken into account that a large and spacious additional compartment increases overall comfort, but it significantly affects the price and weight of the tent (not to mention its overall dimensions). So when choosing for this parameter, it is worth considering the real conditions and features of the operation of the tent. We only note that in order to organize additional beds, it is worth paying attention to vestibules with a length of at least 150 cm — usually, they can accommodate additional places at least across, and often along the tent.

Number of windowsprovided by the design of the tent. Windows provide the penetration of natural light and relieve you of the need to use additional sources of lighting during daylight hours; in addition, when properly positioned, they allow you to inspect the area without leaving the tent.

The number of poles provided in the frame of the tent. For hemispherical types (see "Shape") for 2-3 people, not intended for extreme conditions, 2 poles are considered quite sufficient; larger and/or reinforced models may have more poles. In the case of half-barrels, this amount is directly related to the length of the tent.

Both the rigidity of the frame and the reliability and durability of the tent itself depend on the thickness of the arcs. Usually, the larger and more capacious the tent, the thicker the arches are needed for the frame. Arcs made of plastic and fibreglass most often have a thickness of 7 to 13 mm, while steel and aluminium — from 5 to 16 mm. With an increase in the section of the arcs, the weight of the tent in the folded state also increases.

The material from which the frame of the tent (arc) is made. The main requirements for arcs are strength, resistance to deformation (elasticity) and low weight. Modern tents use several materials with different ratios of these parameters.

— Aluminium. A fairly common material: it has good strength characteristics and low weight, but it is relatively inexpensive. At the same time, aluminium is prone to deformation under long-term stress (although this is usually not critical even when parking for several days).

— Fibreglass. Composite material based on a combination of fibreglass and plastic. The main advantage of fibreglass is resistance to deformation: even under prolonged loads, the arcs do not lose their shape. In addition, this material is cheap and light in weight (although somewhat heavier than aluminium). The disadvantage of fibreglass is its sensitivity to low temperatures, which limits its use in winter conditions and at high mountains. However, most people use tents in the warm season, and therefore fibreglass has recently gained considerable popularity.

— Steel. Steel is the most durable of the described materials, in addition, it holds loads well, almost without deforming. At the same time, steel arcs have a significant weight, and therefore they are rarely used in tents.

— Durapol. A composite material that...has appeared relatively recently and is positioned as a more advanced alternative to fibreglass. Durapol has a "puff" design: the outer layer is made of special polymer resins, metal foil is located under it, a synthetic mesh is located under it, and, finally, a layer of fibreglass. According to the creators, arcs made of this material are more durable and resistant to fracture than fibreglass, better tolerate low and high temperatures, as well as ultraviolet radiation, are less susceptible to residual deformations and have less weight.

— Nylon. Synthetic material with good water resistance and average characteristics in terms of strength and resistance to negative influences: quite main function light weather conditions, however, when wet, it loses some strength (tends to stretch), and is also sensitive to prolonged exposure to ultraviolet radiation. As a result, it is used relatively rarely.

— Polyester. It also refers to synthetic materials, it is considered a slightly more advanced option than nylon: it withstands wetting and heating well, is less sensitive to ultraviolet radiation, and as a result, it has greater durability. At the moment it is the most popular material for awnings.

— Polyamide. The general name for some varieties of synthetic fabrics, including, in particular, nylon and nylon described above. The properties of polyamides are similar to nylon: on the one hand, low cost, resistance to moisture and abrasion, as well as strength, on the other hand, a tendency to stretch when wet and loss of strength when exposed to UV radiation

— Polycotton. A material that combines cotton with synthetic fibers (usually polyester), usually in a ratio of 1:2 (synthetic-cotton). This combination provides durability, resistance to adverse conditions, polycotton resists moisture well and at the same time “breathes”. It's also better than pure synthetics at keeping you cool on a hot day and warm on a cold day. At the same time, this material is quite heavy and expensive, which is...why it is rarely used and only in camping tents (see "Purpose").

— Polyurethane. Typically, this refers to a polyurethane coating applied to a synthetic polyester or nylon backing. The main function of such a coating is to improve the water resistance of the awning (see below). However, the specific values of water resistance in different models can vary markedly. The base material (and, accordingly, the main features of the awning) usually depends on the price category of the tent.

— Polyethylene. Polyethylene is absolutely waterproof, but it also does not let air through. As a result, this material is found exclusively in tents (see "Destination").

— Texit membrane. A variety of high-quality membrane fabrics, combining, on the one hand, high water resistance values (10,000 mm Hg and above), on the other hand, the ability to "breathe" and let water vapor through, which contributes to thermoregulation and maintaining a comfortable climate in the tent. However, this material is expensive, and therefore it is used only in high-end expeditionary equipment.

— Cotton. Natural cotton, usually, with nylon or polyester rip-stop threads, as well as additional water-repellent impregnation. This material is durable, reliable and at the same time passes air well and provides convenient thermoregulation, keeping cool in hot weather and warm in cold weather. Its disadvantages are the high cost and rather large weight, which limits the use of cotton for advanced models of camping tents.