Comparison NVIDIA Shield 16GB vs NVIDIA Shield

The official release year of the game console. Usually, it is indicated by the date of official sale. This information allows you to determine the "age" of the device — and, accordingly, its functionality (to some extent), including within its own platform. So, for example, the difference between the Xbox One S and Xbox One X in terms of name is not particularly obvious; but knowing that the first was released in 2016, and the second — in 2017, you can definitely determine which model will be newer and more advanced. Accordingly , the novelties of 2020 and 2019 will be even better.

The number of gamepads supplied with the console.

Recall that the gamepad is a game manipulator in the form of a small remote control with buttons, levers and other controls. Such devices are used as standard controllers in most desktop consoles (see "Form Factor"). And the number of gamepads corresponds to the number of players who can simultaneously use the console. Most often, there is only one controller in the kit, but many models come with 2 gamepads at once — based on multiplayer for two players, for example, football, fighting or cooperative shooting.

Please note that some models may have specific gamepad counting rules. So, for the Nintendo Switch (see "Form factor — portable / desktop"), a pair of controllers, which in desktop mode is combined into one manipulator, is still considered exactly two gamepads.

The diagonal of the set-top box's own display. The display is by definition found in handheld models and game pads (see Form Factor); in desktop models, this element of equipment is quite rare and is usually installed not in the set-top box itself, but on standard controllers (which sometimes can even work as separate devices).

The larger the display size, the larger, respectively, the overall size of the image that the user sees on the screen. However, it is worth considering 2 points. Firstly, an increase in the display size has a corresponding effect on the dimensions of the set-top box itself, and therefore even in advanced tablets it does not exceed 7". Secondly, the image quality depends not only on the size of the display, but also on its resolution (see below). Moreover, at the same resolution, the picture on a larger screen will be less clear and more "grainy" due to the larger pixel size.

Set-top box native display resolution. This parameter largely determines the quality of the image: the higher the resolution (with the same diagonal) — the more even and smoothed the “picture” will be, the less noticeable will be the individual points that make up it. Here, however, it must be borne in mind that the corresponding graphics resolution should be provided for in the games themselves. Ideally, it should match the display values — otherwise the image will look either too rough, "grainy" (if the game resolution is less than that of the screen), or small and cloudy (if the game resolution is higher). However, most platforms for portable models have certain requirements for screens, and manufacturers, even unofficial ones, usually try to follow them.

The presence in the design of the set-top box of a screen that is sensitive to touch — like those used in modern smartphones and tablets; in fact, gaming tablets (see "Form factor") are equipped with such screens by definition. The touch display significantly expands the control possibilities — in some games it is most convenient to control the process with the help of touches on the screen, and in general, as a controller, it is quite universal. In addition, this function can be very useful when using additional, non-gaming features (for example, while surfing the web).

— DVD/Blu-ray drive. Drive for reading optical discs. This feature is typical mainly for desktop set-top boxes (see "Form factor"); they at least support DVD, but many models are capable of working with Blu-ray. However, there are also portable consoles that support optical discs — full-size DVD / Blu-ray are too bulky for them, so specific formats are usually used in such cases (such as UMD in some PlayStation Portable models). Discs are most often used as media for games, although some models may also provide the ability to play audio and video (that is, in fact, use the set-top box as a media centre).

— HDR support. The ability to output a desktop video signal with the so-called extended dynamic range. In such an image, firstly, the colour depth increases (in other words, more different shades are displayed), and secondly, the contrast is enhanced — light areas look brighter, and dark areas look darker. This improves colour quality, makes the image more realistic and enhances the impression of depth, the picture is perceived as less flat. However you need to keep in mind that to fully use this function, you will also need a TV or other HDR-enabled screen — otherwise, all the advantages of this technology will be nullified by the limitations in the functionality of the screen itself. Also note that HDR technology has several formats (for example, HDR10 and HDR Dolby Vision), and not all of t...hem are compatible with each other. Therefore, to use this feature, you should make sure that the set-top box and TV are compatible with HDR standards.

— UltraHD (4K) support. The ability to work set-top box with the image standard 4K. The standard resolution of such an image is 3840x2160, which is 4 times higher than Full HD in terms of the number of pixels. This feature is mainly found in set-top boxes and allows you to output 4K video to a TV or other external device. Thus, you can get a very high quality, detailed image. However, note that in order to fully view such an image, it must be supported not only by the console, but also by the screen to which it is connected — otherwise all the advantages of ultra-high resolution will be nullified. Also note that not all modern games and other content are available in 4K (although, of course, nothing prevents you from playing videos of lower resolutions on the set-top box).

— Support for video services. Ability to work set-top boxes with various network video services. Usually, pre-installed client programs are responsible for this function, which makes it easy to search and play various content on the Internet. Among the video services supported by modern set-top boxes, there are, in particular, YouTube (the most famous and largest network video site), Netflix (one of the largest producers of TV series distributed over the Internet), Amazon Video (provider of TV series and films on demand) and others. . Note that access to content may be paid and have regional restrictions.

— LAN (Local Area Network). The most common and in fact the dominant interface today for wired connection of various electronic devices to computer networks. Allows you to work with local resources, as well as access the Internet. In the case of game consoles, such a connection can be used for network games, for working with specialized gaming services, cloud storage, firmware updates, and even for full-fledged web surfing and/or playing music and videos from local resources or Internet sites; specific network capabilities in different models are different. Note that the LAN interface is installed exclusively in desktop consoles (see "Form factor") — it is poorly suited for portable ones for a number of reasons.

— Wi-Fi 4 (802.11n). Game consoles use Wi-Fi wireless technology primarily to access the Internet. The ways of using such a connection can be different: multiplayer games, access to branded gaming services, social networks, full-fledged web surfing, updating games or firmware, etc. This method of connection is more convenient than wired, because it eliminates the hassle with cables; and for portable models (see "Form factor"), it is actually the only possible one. Specifically, the Wi-Fi 4 (802.11n) standard provides data transfer rates up to 300 Mbps and uses two bands — 2.4 GHz and 5 GHz. The latter ensures compatibility with both earlier (Wi-Fi 802.11 b/g) and later (Wi-Fi 5) standards. And the mentioned speed is consi...dered relatively low, but for most tasks it is more than enough.

— Wi-Fi 5 (802.11ac). Further, after the Wi-Fi 4 described above, the development of Wi-Fi technology. It uses the 5 GHz band and gives a data transfer rate of more than 1 Gbps (in the future — up to 6 Gbps). This speed not only simplifies the transfer of large amounts of data (for example, downloading games or updates to them), but also reduces lag in online games. For compatibility with older Wi-Fi standards using the 2.4GHz band, Wi-Fi 4 may also be supported in addition to Wi-Fi 5.

— Wi-Fi 6 (802.11ax). The latest version for 2020 uses the ranges from 1 to 7 GHz — that is, it is capable of operating at standard frequencies of 2.4 GHz and 5 GHz (including with equipment of earlier standards), and in other frequency bands. The maximum data transfer rate increased to 10 Gbps, however, the main advantage of Wi-Fi 6 was not even this, but further optimization of the simultaneous operation of several devices on the same channel (improvement of the technical solutions used in Wi-Fi 5 and WiGig). Thanks to this, Wi-Fi 6 gives the smallest speed drop among modern standards when the channel is loaded.

— Wi-Fi 6E (802.11ax). The Wi-Fi 6E standard is technically called 802.11ax. But unlike basic Wi-Fi 6, which is named similarly, it provides for operation in the unused 6 GHz band. In total, the standard uses 14 different frequency bands, offering high throughput in the most crowded places with many active connections. And it is backwards compatible with previous versions.

— Wi-Fi 7 (802.11be). As in the previous edition of Wi-Fi 6E, the technology supports operation in three frequency ranges: 2.4 GHz, 5 GHz and 6 GHz. Wi-Fi 7 bandwidth has increased from 160 MHz to 320 MHz, allowing larger amounts of data to be transferred overnight. IEEE 802.11be uses 4096-QAM modulation, which also allows more symbols to be accommodated in a data transmission unit. The maximum you can squeeze out of the standard is up to 46 Gbit/s information exchange speed. In the context of game consoles, the development of MLO (Multi-Link Operation) looks like a useful innovation, with which you can aggregate several channels in different ranges. This significantly reduces delays in data transfer, while simultaneously ensuring low and stable ping in games. And when connecting multiple client devices, Multi-RU (Multiple Resource Unit) technology is designed to minimize possible delays.

— Bluetooth. Wireless interface designed for direct connection between various devices; very versatile and can be used for a variety of purposes. In game consoles, use cases for Bluetooth include connecting wireless controllers, headphones and headsets, and sharing files with other gadgets (such as a laptop or tablet); the specific capabilities of this interface are different in different models. Bluetooth uses the radio range and has a range of about 10 m, while it can maintain a connection even through walls (except that the range in this case is reduced).

— NFC. NFC (Near Field Communication) is a wireless communication technology with a short range, of the order of several centimeters. Potentially, it has quite extensive capabilities, but today it is most often used as an auxiliary tool when connecting via Wi-Fi or Bluetooth. If both connected devices have an NFC, instead of searching, connecting, authorizing and other actions, it is enough to bring these devices to each other and accept the connection. The vast majority of game consoles with an NFC are portable (see Form Factor).

— mini-Jack (3.5 mm). General purpose connector, most commonly used as an analogue audio output. Simply put, in set-top boxes, such an interface is usually designed to connect headphones, speakers and other external audio accessories — a lot of such devices use a 3.5 mm plug, and there are corresponding adapters for other interfaces. At the same time, the specific functionality of the mini-Jack connector may be different. So, in some models it works only as an output, in others it can be used to connect a headset with a microphone or even a separate microphone. In addition, this connector can be combined with an optical S / P-DIF output (for more details, see "Additional").

— miniHDMI. A smaller version of the HDMI interface detailed below. It is installed in portable consoles and game pads (see "Form factor"), does not differ from the full-size version, except for the dimensions of the connector, and is used for the same purpose — to connect to a TV or other screen and transmit video and audio signals.

— HDMI. A digital interface that allows you to simultaneously transmit high-definition video and multi-channel audio up to 7.1 over a single cable (in addition, in high quality and with a minimum of interference). It is one of the most common in modern video technology, the vast majority of TVs and monitors have at least one HDMI input. At the same time, for working with resolutions...from HD (1280x720) and higher, this connection interface is considered optimal today. Therefore, the presence of HDMI is almost mandatory for desktop consoles with support for high-definition video (portable models do not use a full-size connector due to their relatively large dimensions).

— microUSB. A reduced (actually, the smallest to date) version of the USB interface, widely used in computer technology for connecting external devices; completely identical to the full-size version, except for the shape and dimensions of the connector. Appeared due to the fact that the original USB connector has rather large dimensions, poorly suitable for pocket-sized equipment; accordingly, among consoles it is usually found in portable models and gaming tablets (see "Form factor"). The microUSB connection is designed for the set-top box to work as a connected device, slave (for more details, see "USB 2.0"). With it, you can, for example, download new games to your device or update the firmware.

— micro USB (MHL). Connector that combines the capabilities of microUSB and HDMI (see above). It is completely identical in shape and size to microUSB, it is also compatible with a conventional USB interface and provides the same features; however, MHL can also be used for high-definition video and multi-channel audio. Such a transfer is provided through a simple adapter cable with a microUSB plug on one end and HDMI on the other; with this connection, the set-top box battery can even be recharged. MHL was created as a mobile standard and it is used, respectively, in portable models (see "Form factor"). It eliminates the need for manufacturers to provide a separate miniHDMI output for video output, which has a positive effect on compactness. However for normal operation in video transmission mode, it is necessary that the TV or other external screen also has MHL certification; however, in extreme cases, the situation can be corrected with a simple adapter.

— USB-C. A kind of USB connector, positioned simultaneously as a replacement for full-size USB and for compact microUSB. It is comparable in size to microUSB, which is why it is found mainly in portable and hybrid consoles (see "Form factor"). One of the features of this interface is a two-way connector that can be inserted into the socket by either side (unlike previous types of USB connector). In terms of purpose, USB-C is in most cases similar to microUSB; and in terms of data transfer speed and other characteristics, it usually corresponds to USB 3.0 or 3.1 (see below).

The number of full-size USB 3.2 gen1(formerly USB 3.1 gen1 and USB 3.0) ports in the set-top box.

This standard differs from the USB 2.0 described above by an increased maximum data transfer rate of up to 4.8 Gbps, as well as a greater power supplied to the power connector; otherwise, both versions are almost identical and fully compatible with each other.