Comparison FeiYu Tech G6 vs FeiYu Tech WG 2

The range of roll angles (to the side) supported by the stabiliser.

Can be recorded in two ways (See "Tilt angle")

— Joystick. Usually, the joystick has the form of a switch that can move or tilt in different directions. With it, the user can control the position of the camera mounted on the stabiliser — namely, tilt it and turn it to the sides.

— Buttons. The presence of buttons for turning the camera in one direction or another. Compared to joystick control, it is a less comfortable and convenient solution.

— Time lapse. The ability to use a stabiliser for shooting video in time-lapse mode. In this mode, shooting is carried out at a very low frame rate (one frame every few seconds, or even minutes), due to which the effect of fast movement is achieved in the finished video (for example, a day from sunrise to sunset can fit in several minutes). However, this is the general principle of time lapse; but the specific ways of its implementation may be different.

— Selfie shooting. The presence of a separate mode for shooting selfies.

— Sports mode. It allows you to use the stabiliser when shooting in extreme conditions, on the go and even while running. If you turn on the sport mode, the stabilizer begins to compensate for even deep and sharp frame deviations. Of course, an increase in the potential of the stabilizer affects the charge of the battery pack — the sport mode significantly speeds up the process of discharging the battery.

— Panorama. The presence of the mode of automatic shooting of panoramas in the design of the stabiliser. In this mode, the camera attached to the device automatically rotates, taking a series of shots, from which the finished panoramic image is then “glued together”. Most often, this function involves the creation of horizontal panoramas, but it can also provide the mo...vement of the camera vertically.

— Fixing camera position. The ability to fix the position of the camera mounted on the stabiliser. Fixation means such a mode of operation in which the camera remains constantly directed in the same direction, regardless of the position of the stabiliser itself.

— Axis lock. The presence of an axis lock in the design of the stabiliser — in such a way that when turning along this axis, the camera will follow the movement of the stand. Such an opportunity is necessary in cases where there is a need for precise and operational control over the movement of the camera.

— Tracking mode. The presence of an automatic tracking mode in the stabiliser. By the name, in this mode the device automatically follows a certain object, turning the camera so that this object is constantly in the centre of the image, or at least in the frame. In this case, the subject for tracking can be set by the operator himself.

— Inversion mode. The presence of the inversion mode in the design of the stabiliser. This function, as the name suggests, allows you to turn the device upside down, keeping all its functions and the position of the camera.

— The control wheel allows you to speed up and simplify the setting of the stabiliser operating modes. The wheel is designed to complement the keypad, but in some cases, it can replace the buttons completely. Typically, the control wheel is used to adjust the sensitivity of the gimbal, as well as rotate and lock the camera mounting pad. If the optics are fully compatible with the stabiliser, then the control wheel can be used to adjust both focus with zoom and many other filming parameters.

— Time lapse. Shooting video in time lapse mode involves a very low frame rate (one frame every few seconds, or even minutes). In the completed video, the effect of fast movement is achieved (for example, the day from sunrise to sunset fits in just a few minutes). However, this is the general principle of time lapse; but the specific ways of its implementation may be different depending on the specific model of the stabiliser.

- Selfie mode. A separate mode for shooting selfies. This function can be implemented in different ways, depending on the purpose of the device. It is aimed at filming himself and the immediate environment of the operator.

- Sports mode. The mode is designed for high-quality shooting of dynamic scenes in motion. In sports mode, the stabiliser automatically compensates for frame deviations from the reference location, while the motor runs at the highest possible speed.

- Panorama. In this shooting mode, the camera attached to the device automatically rotates around its axis, taking a series of shots, from which the panoramic image is then “glued together”. Most often, this function involves the creation of horizontal panoramas. However, camera movement in the vertical plane can also be provided.

— Tracking mode. Automati...c tracking of a certain object by pointing the camera so that the shooting target is constantly in the centre of the image, or at least in the frame. The subject for tracking is set by the stabiliser operator.

— Inversion mode. This mode allows you to turn the device upside down, retaining all its functions and camera position. It will come in handy when shooting from atypical angles (for example, from the ground).

Model of the battery used in the stabiliser. This information is not very important when choosing: if you wish, knowing the battery model, you can find detailed information about it. However, the key characteristics of the battery are usually given in general information about the stabiliser. Nevertheless, model information can be useful if you plan to purchase an additional battery, or if you already have a battery and you need to evaluate its compatibility with the device.

The capacity of the battery used in the stabiliser.

In theory, a higher capacity allows you to work longer without recharging, but the battery life of the stabiliser also depends on its power consumption. So, only models with similar performance characteristics can be compared with each other according to this indicator; and when choosing, it is better to focus not on the capacity, but on the directly claimed battery life.

The maximum length of time the device will work before it needs its battery to be recharged. It is worth considering that the manufacturer indicates the maximum time, which does not correspond to real indicators due to the conditions and intensity of use.

The ability of stabiliser to work steadicam in power bank mode — an external battery for various portable devices. It allows the device to share its energy with the phone, and the recording is not yet over.

There are two main types of connection in modern stabilisers: Wi-Fi(more precisely, Wi-Fi Direct — for direct communication between devices) and Bluetooth. Despite the difference from a technical point of view, in this case, these standards are very similar. First, they are both wireless. Secondly, both are used for direct connection with devices installed on the stabiliser — smartphones, action cameras, etc. (for more details, see "Features"). Thirdly, the specific functions of such a connection may be different, they should be specified separately for each model. However, such functions usually include at least control over the recording process (start/pause video recording, capture photos). So the main selection criterion for this indicator is what technology the connected gadget supports — Wi-Fi or Bluetooth.

Separately, we note that there are stabilisers that support both standards at once — these are mainly expensive professional models for cameras (see "Features"), where Wi-Fi is used to transfer video to an external screen, and Bluetooth is used for basic remote control.