HyperX Predator DDR4 2x8Gb HX436C17PB4K2/16
 | Outdated Product 899 ₴ A dual-channel set of high-speed DDR4-3600 memory modules, consisting of two single-sided 8-chip modules with a capacity of 8 GB each. The manufacturer is positioned as a product for demanding gamers, focused on installation in top gaming systems. With high clock speeds, a high-quality eight-layer PCB, and an aluminium heatsink, these modules will be of interest to enthusiasts who can get additional performance boost by overclocking the main system components. The HyperX Predator DDR4 2x8Gb DDR4 2x8Gb RAM kit comes with a nominal clock speed of 3600 MHz, delivering an impressive throughput of up to 28.8 Gbps per module. The manufacturer guarantees performance at CL17-19-19 timings and a voltage of 1.35V, which reduces the latency of the memory subsystem and improves overall and gaming perf...ormance. It should be noted separately that the DDR4-3600 mode is activated automatically only if the motherboard supports Intel XMP 2.0 technology. Otherwise, the board will activate the default settings (DDR4-2400 with CL17-17-17 timings at 1.2 V), and high passport settings will need to be configured in the UEFI BIOS in manual mode. The kit demonstrates high compatibility and can work in any configuration based on 6th generation Intel Core processors and later, as well as AMD Ryzen processors. |
 |
HyperX HX436C17PB4K2/16 | |||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||
A dual-channel set of high-speed DDR4-3600 memory modules, consisting of two single-sided 8-chip modules with a capacity of 8 GB each. The manufacturer is positioned as a product for demanding gamers, focused on installation in top gaming systems. With high clock speeds, a high-quality eight-layer PCB, and an aluminium heatsink, these modules will be of interest to enthusiasts who can get additional performance boost by overclocking the main system components.
The HyperX Predator DDR4 2x8Gb DDR4 2x8Gb RAM kit comes with a nominal clock speed of 3600 MHz, delivering an impressive throughput of up to 28.8 Gbps per module. The manufacturer guarantees performance at CL17-19-19 timings and a voltage of 1.35V, which reduces the latency of the memory subsystem and improves overall and gaming performance. It should be noted separately that the DDR4-3600 mode is activated automatically only if the motherboard supports Intel XMP 2.0 technology. Otherwise, the board will activate the default settings (DDR4-2400 with CL17-17-17 timings at 1.2 V), and high passport settings will need to be configured in the UEFI BIOS in manual mode. The kit demonstrates high compatibility and can work in any configuration based on 6th generation Intel Core processors and later, as well as AMD Ryzen processors.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog HyperX 2025 - new arrivals, bestsellers, and the most relevant models HyperX.
1 0 6 10 |
Useful Review? Yes0 No0 |
Good potential for overclocking.
They worked harder at a voltage of 1.44V and nothing happened to them (there are 4 pieces at a time, each (2x16GB) and at 3800 MHz at 1.42V) There are no shortcomings (for me). For some, their height may not be long.  Bohdan Artemenko: use HyperX HX433C16PB3K2/16 more than year |
Useful Review? Yes1 No0 |
Good memory. Overclocked to 3600. Timings= 18-20-20-20-40. Voltage= 1.35 V. Overclocked to 4000. Worked okay, but on Ryzen 7 3700x left it at 3600. Cold, excellent, fast not found |
Useful Review? Yes4 No3 |
Надеюсь, этот отзыв поможет избежать тех нечеловеческих усилий, которые мне пришлось приложить к системе, чтобы получить искомое)
Система: мать Asrock AB350 pro4, проц Ryzen 5 1600x, видюха palit 1050ti. Память мне досталась с чипами Хьюникс. До этого был другой комплект от самсунг,который наотрез оказывался работать стабильно на 2800 (разгон с 2133мг). Перепробовал с самсунгом кучу всяких настроек, вольтаж, все-равно. С этим тоже долго возился (стабильно работал только на XMP профиле на 2666) пока не догадался наконец переставить память из слотов 1 и 3 в 2 и 4. И тут все понеслось) Разогнал легко на 3200, понизил тайминги до 16/16/16/36, вольтаж 1.37, команд рэйт Т2, Gear down mode disabled. На таких настройках работает как часы. Я так и не выяснил,в чем был косяк с первым и третем слотами, надеюсь этот комvентарий избавит от страданий некоторых юных оверлокеров) цена, потенциал разгона не замечено. use HyperX Predator DDR4 2x8Gb less than month |
My timings dropped to 17-22-22 at 4100, but I don’t find that screen here (at once I just have 4 dies)
Results screenshot axis: https://prnt.sc/vwnfnr
Just don’t forget that I also raised the voltage on VCCIO, VCCSA, but not more than 1.2-1.23v (can be individual) do not set more than 1.25v