Kludi Scope 339330575

Realm of cylinders

The tap for the kitchen of the German manufacturer Kludi Scope 339330575 stands out for its simple and practical design with straight lines. The body of the appliance, lever mechanism, locking lever, spout and aerator are made in the same style, dominated by the cylinder. And two types of finishes in stainless steel and chrome colours allow you to choose between the aesthetics of a matte or shiny surface. The spout is located at a slight angle to the swivel ring at the bottom of the body.

Excellent pressure and light whisper of the water jet

The advantages of the model include a ceramic cartridge with a hot water limiter and the possibility of being used in tandem with an instantaneous water heater. With standard pressure in the water supply, the device shows excellent pressure parameters and fairly quiet operation. So, at a pressure of 3 bar, the maximum water flow is 15 L / min at a noise level of 20 dB. The tap is installed on a hole of non-standard diameter 32 mm and connected to the water supply using a quick installation system with a flexible G 3/8 connection.

Salvation in deep washing

Despite all the advantages, the model has its functional limitations. Unfortunately, the low jet height of just 106 mm is not compensated for by the pull-out spout found in other Kludi Scope units. And even a 360-degree rotation of the spout will not allow you to place a large pot under the stream of water, unless you use a sink with a deep bowl.