Укр|Eng|Рус
Ukraine
Catalog   /   Tools & Gardening   /   Construction Power Tools   /   Staple Guns & Nailers

Comparison Makita DPT353Z vs Makita DPT351Z

Add to comparison
Makita DPT353Z
Makita DPT351Z
Makita DPT353ZMakita DPT351Z
Compare prices 17
from 8 999 ₴
Outdated Product
TOP sellers
Product typenailernailer
Typecordlesscordless
Fastener type
pin
pin
Fastener sizes40 (0.64 мм)40 (0.64 мм)
Compatible pinsBosch 40, Bostitch MINI S, Prebena ALBosch 40, Bostitch MINI S, Prebena AL
Specs
Operation typecontactcontact
Fuse
Magazine typecassettecassette
Magazine capacity100130
Fasteners size
Max. pin thickness0.64 mm0.64 mm
Min. pin length15 mm18 mm
Max. pin length35 mm35 mm
Features
Functions
stroke force / depth adjustment
LED light
magazine indicator
 
LED light
magazine indicator
General
Battery in setnono
Battery platformMakita 18V LXTMakita 18V LXT
Battery voltage18 V18 V
Compatible batteriesBL1815N, BL1820, BL1830, BL1840, BL1850, BL1860BL1815N, BL1820, BL1830, BL1840, BL1850, BL1860
Charge level indicator
Battery mountsliderslider
Dimensions257x79x226 mm
227x79x249 mm /with battery/
Weight
2.2 kg /with battery/
2.1 kg /with battery/
Added to E-Catalogjuly 2017july 2016

Magazine capacity

The number of fasteners that fit in the stapler magazine.

Note that manufacturers tend to indicate the maximum number of parts in the characteristics — that is, the capacity for the thinnest fasteners allowed by the design of the tool. Accordingly, fewer larger parts will fit in the store; this must be taken into account when choosing. Nevertheless, this parameter makes it possible to evaluate the instrument and compare models similar in class to each other.

Large capacity, on the one hand, allows you to work longer without interruptions to recharge the stapler. On the other hand, volume magazines are usually very bulky and can weigh a lot on their own, not to mention the weight of the fasteners loaded in them. Also, if parts are charged one at a time, recharging can become quite a long and tedious affair. Therefore, it makes sense to specifically look for a tool for 100 parts or more(especially when it comes to thick fasteners) only if the ability to work for a long time without reloading is more important than the disadvantages described above.

Min. pin length

The shortest length of the attachment pin (see Attachment Type) that the stapler can handle.

Parts of small length are clogged relatively easily and do not require much effort, however, fasteners that are too short simply will not be captured by the tool and will “shoot” as expected. Therefore, modern staplers often have a limitation not only on the maximum, but also on the minimum length of the pin. This option is especially relevant if you plan to work with small details.

Functions

Adjustment of impact force / depth. The ability to adjust the force of impact or the depth of clogging fasteners. These functions are implemented somewhat differently: the impact force is changed by adjusting the power supplied to the striker upon impact, and the driving depth can be set due to a mechanical limiter — for example, by retracting the striker a certain distance back, so that it simply does not was able to move beyond a certain distance. However, the purpose and use of these functions is similar: first of all, they allow you to change the depth to which the fastener is driven into the material. In addition, adjusting the force of impact (namely force) can be useful when working with delicate materials, where too powerful impacts are undesirable. Specific details of the implementation of this function should be clarified in each case separately.

Double hit. Possibility of operation of the stapler in the double impact mode. Here, this term means the ability to drive two fasteners at once in one blow — for example, for connections that require increased reliability. Note that double impact most often only works on staples, even if the tool is able to work with other types of fasteners (see above). Firstly, it is for brackets that this possibility is most relevant; secondly, it is much more difficult to implement it for nails or pins.

Bending the staple.... The ability of the stapler to work not only for driving staples, but also for bending their legs after installation. The need for bending arises in cases where the tool is used to fasten relatively thin layers of material, and the staples pierce the parts to be fastened through: bent legs provide a secure hold, and are also safer — the risk of scratching or pricking the protruding edge of the staple is minimal. Note that such work requires an anvil of hard material placed under the fastened materials; in some tools with a bending function, the anvil is part of the design, but most often it is not.

— Blade of knife. The presence of a knife blade in the design of the stapler. This feature allows you to use the tool not only for driving fasteners, but also for cutting material — for example, preparing upholstery for furniture. The blades are usually made removable (so that a dull one can be quickly replaced with a fresh one or sharpened with convenience) and have a beveled shape (this allows you to cut with the very tip of the knife, providing high accuracy and accuracy). However, this function is quite specific, therefore it is rare, and mainly among percussion models (see "Type") — only they turn out to be quite light, compact and convenient for use as knives.

— Backlight. The presence in the stapler of its own built-in flashlight, usually directed in such a way as to highlight the place of impact. This feature is extremely useful when working in low light conditions. Note that such conditions can easily arise even under normal ambient lighting: for example, the tool itself often obscures the impact site, worsening visibility and complicating accurate aiming.

— Brushless motor. Such motors do not have the classic carbon brushes found in conventional power tools, whose friction during engine operation leads to additional heating, which leads to unnecessary energy consumption and general engine wear. Refusal to use them allows you to extend the battery life of the tool, on the one hand, as well as the life of the engine, on the other.

Charge level indicator

An indicator showing the battery charge level. The design and functionality of this indicator is usually quite simple — most often it is an LED indicator that flashes or changes colour to indicate various events related to the battery (“Normal charge level”, “Charge the battery”, “Charging in progress”, “Charging completed”, etc. .P.). Nevertheless, even such a simple device makes it much easier to control the charge level and reduces the risk of being left with a discharged battery at the most inopportune moment.
Price graph
Makita DPT353Z often compared