Укр|Eng|Рус
Ukraine
Catalog   /   Camping & Fishing   /   Fishing   /   Rods

Comparison Fishing ROI XT-One 240-15 vs Energofish Kamasaki Viking Pole 200

Add to comparison
Fishing ROI XT-One 240-15
Energofish Kamasaki Viking Pole 200
Fishing ROI XT-One 240-15Energofish Kamasaki Viking Pole 200
Compare prices 1
from 145 ₴
Outdated Product
TOP sellers
Rod typespinningpole
Designplugtelescopic
Rod actionfast
Specs
Max. casting15 g20 g
Min. casting3 g5 g
Rings
Sections2 pcs2 pcs
Working length240 cm200 cm
Folded length125 cm117 cm
Rod materialcarbon (graphite)fibreglass
Handle materialfoam (EVA)
Weight125 g210 g
Added to E-Catalogoctober 2019january 2019

Rod type

- Spinning. Although in fact this type of rod is one of the most universal, its main purpose is still the spinning method of fishing: the bait is cast over a long distance and pulled out using a reel. At the same time, the movement of live prey is simulated, which allows you to catch various types of predatory fish. Spinning rods are relatively short in length - usually no more than 3 m - and are designed to have good resistance to jerking; at the same time, the elasticity of the rod can provide (with the correct selection of tackle weight) a casting range of up to 100 m. They usually have a plug-in design (see below).

- Carp. Rods specially designed for carp fishing. This fish is distinguished by significant strength even with a relatively small body weight, and the actual weight can reach a couple of tens of kilograms. Accordingly, carp fishing rods are characterized by increased strength and resistance to stress. Also, such models have a fairly clear standard of length - within 300 - 400 cm.

Feeder / picker. Rods designed for catching fish that live on or near the bottom. When fishing in this way, a special feeder (feeder) with hooks is thrown into the water and lowered to the very bottom. There is no float; to signal a bite, a special thin and soft tip of the rod itself (the so-called quivertip) is used: it has a distinctive color and notic...eably bends when the fishing line twitches. Actually, the presence of a quivertip is one of the distinctive features of feeder rods. Such tops can be either permanent or replaceable; in the latter case, the process of selecting a quivertype for the expected size of prey is simplified. Feeders also have a large number of rings and a design that promotes casting accuracy (this is important when bottom fishing). Length - usually in the range of 200 - 400 cm.
A picker rod can be called a lightweight class of feeder rods. Pickers are also designed for bottom fishing, but they have a significantly shorter length and weight than classic feeders, and can also be used with lighter tackle. This provides a number of advantages: the short length ensures maneuverability in cramped conditions (for example, on overgrown banks, where a longer rod would cling to vegetation when swinging), and a lightweight feeder reduces the volume of the splash and scares the fish less than a conventional feeder, especially at shallow depths . Another advantage is high sensitivity (due to low weight). At the same time, pickers are designed mainly for catching small fish like roach; They are poorly suited for large prey, although such use, with a certain skill, is still not excluded.

- Bolognese. A variety of rods for float fishing, one of the most versatile - suitable for different distances and different types of reservoirs. At the same time, the “lap dogs” are structurally designed for long-distance casting and for ease of tackle control during currents. Therefore, the optimal option for their use is considered to be fishing on rivers with medium and weak currents when using the wiring technique - in other cases they do not have pronounced advantages over float models (see below). At the same time, the use of reels, provided for Bolognese models, by definition, makes it easier to catch large fish - the risk of breaking the line is reduced. Also, such rods are necessarily equipped with rings (see below). The length of the lap dogs is usually from 400 to 700 cm.

- Match. Rod for the so-called match fishing. This technique is also called “long casting,” which fully describes its features - the tackle needs to be cast far and accurately. This method is designed for large fish, which are usually found far from the shore. Accordingly, match rods are initially designed for long range and ease of swing, have a length of about 400 cm (plus or minus) and a plug-in design (see “Design”).

- Surf. Specialized fishing rods for sea fishing. When fishing this way, you have to deal with strong waves, headwinds and the need to throw the tackle quite far, and the prey can have very significant weight and strength. Surf fishing rods are created taking into account all these factors: they have high strength combined with flexibility, withstand loads of several tens of kilograms and allow you to work with heavy equipment, incl. throw with both hands; their rings (see below) are equipped with special rollers for thick, durable fishing line.

- Flywheel. One of the varieties of fishing rods designed for float fishing. Fly models have the simplest design: the fishing line is attached to the end of the rod, and the reel and rings are completely absent from the design. Due to this, fishing rods of this type are distinguished by good sensitivity, but their casting range is very short (it directly depends on the length of the rod). Fly models are designed mainly for amateur fishing in simple conditions; they are also considered a good option for beginners just learning the basics of fishing.

- Universal. Rods of universal design perform many of the assigned functions, regardless of the conditions, equipment and the chosen type of fishing. They cope well with various tasks, but their multifunctionality forces them to make compromises and such rods are still inferior to specialized models. However, they can be used for spinning fishing, trolling, as a side fishing rod, etc. The key advantage of universal options is that the fisherman does not need to carry fishing rods with different characteristics, but rather just take one multifunctional fishing tool. Universal fishing rods are often preferred by amateurs and weekend fishermen.

- Casting. Rods similar in design and purpose to spinning models (see on top), but differing in a number of features. So, they are designed for use not with inertia-free, but with the so-called. a multiplier reel, which is also installed not from below, but from on top the rod (as well as rings under the fishing line). The handle of casting rods has a special protrusion for the index finger, similar to the trigger of a pistol - in common parlance “trigger” or “trigger”. It provides a more comfortable grip, better movement and responsiveness of the rod, and reduces fatigue. The advantages of casting models are ergonomics, as well as high casting accuracy (in fact, such rods initially appeared for competitions in the accuracy of throwing bait).

- Fly fishing. Rods designed for fly fishing. In this kind of fishing, a bait is used that looks like an insect (“fly”), and the fisherman uses gear to imitate its characteristic movements. The key difference between fly fishing and most other fishing techniques is the casting principle: since the fly has negligible weight and is unable to provide sufficient inertia, a special heavy cord is used for casting, to the end of which the bait is attached. The operating principle of this system resembles the action of a whip - hence the name. All this determined the characteristics of fly fishing rods. They are characterized, in particular, by their fairly light weight, the presence of rings, and the location of the reel in the back of the rod, behind the handle, almost at the very end.

- Winter. A type of fishing rod designed for ice fishing in winter. They have the shortest length among all types - usually up to several tens of centimeters - because. When fishing in winter, the fisherman sits almost right on top the ice hole, and excessive length only complicates the matter. Due to their short length, winter fishing rods usually have only one ring for the fishing line - at the top; The coil can be either removable or built-in. Some models come with interchangeable whips of different lengths and stiffness, which allows you to choose the best option taking into account the fishing conditions and the gear used. Note that this variety can also be used in the warm season - for example, for fishing from a boat.

- Marker. Such rods are in many ways similar to the carp rods described on top and can also be used for carp fishing. However, their main purpose is reconnaissance of the bottom of a reservoir, in particular, measuring depths using special marker floats, as well as determining the features of the bottom surface using weights. The main differences between marker rods and classic carp rods are a softer blank (for ease of working with loads) and a low line test (see below), usually up to 2.5 - 3 pounds.

- Spode. Another type of rod used in carp fishing. However, spod models are used not during fishing itself (although this is technically possible), but when casting “missiles” - special gear for baiting prey. Such rods usually have quite high strength, and the line test is at least 4 - 5 pounds.

- Boat. As the name suggests, these rods are designed for fishing from a boat. However, this category does not include all models that can be used from a boat (in fact, such use is available for any type of fishing rod), but only specialized products for trolling fishing. This method is used for freshwater and marine predatory fish: when trolling, the bait is pulled along by a motorboat, cutter or other watercraft on which fishing rods are attached. The main features of rods for this kind of fishing are their short length (about 2 m) combined with high strength: the jerks of the prey can be quite strong, short rods can withstand them better, and a longer length is not required, because baits do not need to be cast far.

- Plug-in. Fishing rods of a special design, different from traditional options. Initially they appeared as equipment for sport fishing, from there they were “adopted” by amateur fishermen. Outwardly, they differ in their enormous length compared to other types: in the shortest models it is about 9 m, in the longest it can exceed 18 m. Note that the design (see below) of such rods can be either plug-in or and partially telescopic (part “telescope”, part plug); both options allow you to adjust the length of the rod by removing or adding intermediate sections. Such models are used for float fishing, in which the tackle is attached to the tip of the rod, and there are no rings for fishing line in the design. All these features provide a number of advantages. So, with the help of a plug fishing rod you can accurately determine the depth and features of the bottom, as well as reach places that are inaccessible with shorter fishing rods. Such a fishing rod does not need to be cast in a big way, which allows you to fish in confined spaces (for example, under low tree branches), as well as in bad weather. And the equipment is short, which contributes to accuracy and sensitivity. The main disadvantages of plug rods are their high cost, bulkiness and long preparation times for fishing.

Design

The general design of the rod. Most often it is folding — plug -in or telescopic — however, there are also one-piece models. Here are the main features of each option:

— Plug. Such rods consist of several sections, which are completely disconnected in the stowed state, and before use they are connected to each other using bushings. On the one hand, this creates certain inconveniences: for example, for reliable transportation, it is necessary to place the fishing rod in a case or otherwise securely connect the components of the rod. Yes, and the process of unfolding / folding can be quite troublesome. At the same time, this design is considered optimal for rods designed for maximum accuracy and/or casting distance — for example, spinning, match and feeder rods (see "Rod Type"). Almost all such models are plug-in. Also note that you should not confuse the plug as a type of rod (see ibid) with this design option: plug-type models can formally be telescopic (this means that part of the rod looks like a “telescope”, see “Rod Type” for more details) )..

— Telescopic. She's "retractable". A design in which the sections have different thicknesses and are inserted one into the other in the folded position, and when unfolded they are alternately extended. Such a scheme provides maximum convenience during transportation — the rod is a “case itself” and does...not require additional cases or ties, unlike the plug-in design. At the same time, the "telescope" significantly reduces the accuracy of casting, and therefore it is used mainly where this parameter is not of decisive importance — in particular, in Bologna and flywheel models (see "Rod type").

— Whole. Solid rods are stronger and more reliable than composite rods, but they have one serious drawback: they cannot be folded for transportation and storage. Therefore, such a design is used relatively rarely — in particular, in individual spinning models of relatively short length, as well as in winter rods, which, in principle, do not need to be made long.

Rod action

The action the rod matches. This parameter is often associated with spinning models (see “Type”), but it can also be indicated in other varieties.

The action characterizes the overall rigidity and elasticity of the rod blank - the main working part located between the handle and the upper end. In practice, the characteristics of bending and straightening during casting depend on this indicator. The “faster” the action of the rod, the stiffer it is, the smaller part of it (counting from the upper end) bends when casting and the faster the structure returns to its original state. Conversely, a slow action means that the rod bends almost along its entire length and returns back at a relatively low speed.

If we talk about specific numbers, then models that bend 1/3 of the length or less are considered fast, and models that bend 2/3 of the length or more are classified as slow. Between these numbers there are intermediate indicators: medium-fast, medium and medium-slow.

The progressive or complex system stands apart from others. The main feature of such rods is that when casting, they work as a fast-action rod, and when fishing for large prey, they exhibit the properties of a medium or even...slow action, bending as the load increases in the shape of a parabola and at the same time dampening the jerks of the fish. Progressive rods combine the advantages of fast and slow blanks in one bottle, but they are more expensive than their traditional counterparts.

The choice of fishing rod depends primarily on the expected fishing conditions. Thus, fast models are well suited for situations where there is no space for a swing - they allow you to throw the bait quite far due to just one movement of the wrist. Such products are considered more accurate; with a fast rod it is easier to throw the bait into a “window” among the algae or other small place. In addition, the rigidity provides good sensitivity when retrieving and playing. In turn, a slow action requires space for the swing, but allows for greater casting distance and reduces the likelihood of line breakage during sudden jerks of prey. Well, we should also not forget about the personal preferences of the fisherman - after all, the effectiveness of casting largely depends on the overall convenience of the rod.

Max. casting

The maximum weight of the entire rig (including bait, weights, hooks, etc.) that the rod can handle. This parameter is not recommended to be exceeded: the structure will be subjected to off-design loads and wear out a lot, to the point that the rod can simply break during a normal cast. In addition, the off-design weight of the casting significantly reduces the range and accuracy of the cast, which is critical, in particular, in spinning and match fishing (see "Rod type").

Min. casting

The minimum weight of equipment (lures, sinkers, hooks, floats, etc.) with which the rod will work effectively. Compliance with this parameter is important, first of all, for types of fishing that require high accuracy, for example, match or spinning (for more details, see "Rod Type") — a rig that is too light will not allow you to cast the rod far enough and accurately.

Rings

The presence of rings in the design of the rod. Through them, the fishing line from the reel located in the handle area is passed to the tip, without tangling and without sticking to the rod itself. The presence of rings, by definition, is mandatory for any rod designed for use with a reel — without them it is impossible to bring the line to the desired point. The only type of rods that do not have rings are fly rods (see "Rod Type").

Working length

The length of the rod in the unfolded (working) position. For different types of fishing, different lengths are considered optimal; see "Rod Type" for more on this. If the type of rod you need has numerous length variations, when choosing, you should take into account the conditions in which you have to fish. On the one hand, longer models usually have a greater casting distance (this is especially true for float fishing); on the other hand, for limited conditions (for example, with dense vegetation on the shore or when fishing from a boat), it may make sense to take a shorter rod.

Folded length

The length of the rod when folded. This parameter primarily affects the convenience of transportation: the shorter the folded rod, the easier it is to carry / transport.

Rod material

Fiberglass. One of the earliest synthetic materials used in modern rods appeared in the middle of the 20th century. It is a substance consisting of thin elongated filaments of ordinary glass. However, unlike the usual form of glass (for example, window glass), fiberglass is a soft and fairly shock-resistant material — for example, rods made of it are much more unpretentious than graphite and carbon fiber (see below), less sensitive to bumps and falls, and are significantly cheaper. The main disadvantage is the significant weight, which creates inconvenience if you need to often cast the bait (for example, when fishing with a lure from the shore). In addition, fiberglass is less resilient and less resistant to bending than the mentioned "carbon" materials.

Composite. Most often, composite rods are made from a mixture of carbon fiber and fiberglass. The first material has good rigidity and bending resistance, but is rather brittle; the second is not so hard, but at the same time less sensitive to bumps, falls, etc. The combined design allows you to combine the advantages of both materials and compensate for the disadvantages. Note that the proportions of this mixture are different, and therefore composite rods can differ greatly from each other in terms of characteristics; it is desirable to clarify this point separately before purchasing.

...href="/en/list/148/pr-9136/">Carbon (graphite). A type of carbon fiber is a synthetic material made up of thin strands of carbon. The main advantage of carbon is its high resistance to bending, which is very important when pulling large prey. In addition, this material is quite light and resistant to bad weather, temperature changes, etc. On the other hand, such rods do not tolerate shocks, falls on a hard surface, etc. and require careful handling — in particular, it is highly desirable to use covers during transportation. However, the advantages of carbon far outweigh its disadvantages, and therefore it is one of the most common materials for modern rods of various types.
This item also includes graphite rods. This is one of the varieties of carbon fiber, somewhat simplified compared to carbon fiber and, accordingly, less expensive. Graphite tolerates heavy bending loads worse, and therefore is used mainly in Bologna and float rods. In addition, due to its plasticity and "biting", this material is also suitable for match models.
Price graph
Fishing ROI XT-One 240-15 often compared