Camry CR 7720
 | Expecting restock 1 428 ₴ Type: fan heater; Controls: touch controls; Power supply: mains; Max. power: 1800; Heating area (m²): 18; thermostat; temperature adjustment; timer; Heating modes: Power modes: 2; Heating modes (kW): 0.9 / 1.8; Dimensions (cm): 25x16.5x14.5; |
 |
Camry CR 7720 | |||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Camry 2024 - new products, best sales and most actual models Camry.
One of the twin devices
The Camry CR 7720 blower heater hardly belongs to the category of original developments, which often happens in this category of equipment. The model completely copies the Electric Ceramic Heater fan heater, which is offered by the German Aldi chain of stores, similar Gemini GCH18B and Equation 1800 W devices, or the Slovenian Rovus KPT-150 heater, which is very similar in design and functions, without a rotary system. There is nothing reprehensible in this, and such “plagiarism” often benefits the consumer: why invent something new if there are already successful devices. This does not detract from the merits and functionality of our device, which is manufactured by the Polish company Adler Europ Group.
Audio Speakers? Fan heater!
The heater outwardly resembles an acoustic system speaker or rather a computer speaker with dimensions of 25x16.5x14.5 cm. And even the fine mesh of the protective grille of the front panel plays in favor of such a comparison. On the back of the device there is an inlet grill, a hidden carrying handle and a power button, as well as an electrical cable with a plug. The rectangular case rests on a small disk-stand, thanks to which the device is rotated horizontally within an angle of 45° (22.5° left and right). The interior equipment consists of a 1800 W ceramic heater, fan, thermostat and control electronics.
Display and touch buttons
In the upper corner of the front surface there is a contrast display disk surrounded by a ring with control sensors. By tapping on the power switch, you start the fan in cold air mode. The remaining buttons are for selecting the heating mode, activating the rotary system, setting the timer time (from 1 hour to 8 hours) and adjusting the temperature (from 10 °C to 35 °C). The display shows the set heating temperature, the power mode indicator (900 W or 1800 W), as well as the indicator for the off timer. At the end of the work, pressing the touch power button sequentially turns off the heating and the device (after the ceramic plates have cooled down for 30 s). For safety, the heater has built-in overheating protection and an automatic shutdown function when tilted forward or backward (limit switch at the base).
