DeWALT DCD732D2
Videos 2Photos 6 |
DeWALT DCD732D2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
High power cordless drill/driver with 13mm quick-release chuck. This is a professional tool capable of solving a variety of tasks, including tightening tight fasteners of significant diameters and drilling metal structures. The powerful motor and 2-speed metal gearbox provide an impressive torque of up to 57 Nm. Since the screw-in-screw operation and the drilling process require different rotation speeds, two speed modes are provided.
The first one limits the rotation speed of the chuck to 550 rpm and is designed to work with self-tapping screws, screws and screws. The second spins the keyless chuck of the DeWALT DCD732D2 drill-driver up to 2000 rpm, which allows drilling holes with a diameter of up to 13 mm in ordinary structural steels or up to 38 mm in wood. For driving screws into soft materials (soft wood, drywall, plastics, etc.) there is a 15+1 position torque limiter and a convenient reverse switch. XR Li-Ion batteries are used as a power source, having a capacity of 2 Ah at an operating voltage of 14.4 V. The package includes two such batteries, an XR universal charger (works with 10.8-18 V batteries) and a durable plastic case for storage and transportation.
Before buying always check characteristics and configuration of product with online store manager
Catalog DeWALT 2024 - new products, best sales and most actual models DeWALT.
1 0 1 8 |
Shurik for robots. The backlight does not turn off immediately, it is convenient to light it in a dark corner, but it interferes with amateurs. I’ll explain for the clubfoot that the bi-tail (bit holder) didn’t fall out of the cartridge, twist it over with your hand until it clicks and then tighten it, then it won’t unwind on the reverse itself Power, dimensions, weight, backlight The chain is not small at all. use DeWALT DCD732D2 month or more i recommend it should buy |
Powerful and compact screwdriver-drill or drill-driver. The thing is, he does both very well. This is due to the excellent torque when using the first speed (400 rpm) and the high rotational speed of the chuck in the second speed (2000 rpm). In general, a tool of this class is usually limited to a speed of 1300 rpm, but here a powerful brushless motor made it possible to increase it by almost half. Turns screws perfectly, but it is important to monitor the position of the torque-limiting clutch. I already had two cases when wood screws screwed into an array of beech were left without hats. The engine is really powerful, keep that in mind. When it comes to drilling, this cordless tool is not much inferior to drills. Unless the emphasis is as strong as on a drill, it cannot be done, but otherwise it shows itself with dignity. Weight with battery is one and a half kilograms. A lot, but with such power, it should not be light. The two supplied batteries have a good capacity, and the universal charger can do the job in one hour. If you release the trigger, the engine will automatically decelerate. This is convenient, but only if you brake sharply from full speed, and this is for a minute, those same 2000 rpm, but the cartridge will open itself with a 50% probability and the drill will fall out. IMHO, such cartridges do an excellent job of braking from speeds up to 1300-1400 rpm, but at 2000 the usual laws of physics work and inertia wins. It is easy to prevent this, do not remove your finger from the trigger button too sharply or do not drill at full speed)) For some reason, they also made a backlight that burns for almost half a minute after the engine stops. |
- Model DCD732D2 — includes 2 batteries (2 Ah), charger and case
- Model DCD732M2 — includes 2 batteries (4 Ah), charger and case
- Model DCD732P2 — includes 2 batteries (5 Ah), charger and case
DeWALT DCD732D2 configurations
Price for DeWALT DCD732D2 | ||||
---|---|---|---|---|
DeWALT DCD732D2 | from 7 647 ₴ | 1 offer | ||
DeWALT DCD732M2 | from 12 379 ₴ | 1 offer | ||
DeWALT DCD732P2 | from 15 840 ₴ | 1 offer |