Gamemax H602 white
![]() |
Based on this case, you can build a computer of almost any level of performance. The mounting platform is designed to install a micro-ATX motherboard, and the Gamemax H602 system unit will fit a processor up to 155 mm high. As a dedicated graphics adapter, you can use a graphics card up to 340 mm long. USB 3.0 (1 port) and USB 2.0 (1 port) are supported. There is a viewing window on one of the sidewalls.
The control panel is located on the top of the case. The manufacturer provided for the presence of 1 fan (in the back of the case), the cooler has a spectacular LED backlight. In total, 6 fans can be used in the system unit. The ventilation ducts are dust protected. The installation location of the power supply is located at the bottom of the case. It is recommended to use a PSU in the ATX form factor. Inside there are 2 bays for installing 3.5-inch devices. Also, there are 2 connectors for 2.5".
![](https://s.ek.ua/posts/files/5655/large_wb_pic.jpg)
![](https://s.ek.ua/posts/files/4353/large_wb_pic.jpg)
Buy Gamemax H602 white
Корпус GAMEMAX H602 | 1 526 ₴ | ![]() | |||
Gamemax без блока питания H602 безблокапитанияH602 | 1 499 ₴ | ![]() | |||
Корпус GAMEMAX H602 | 1 634 ₴ | ![]() | |||
Корпус GAMEMAX H602 | 1 607 ₴ | ![]() |
Brave danish housing for a robotic machine without a video card. The motherboard has become like a dug in, really had a chance to twist the stitch on another landing place. The space is even richer, the lower location of the living block has changed the number of wires in the main wire and the motherboard, everything that is not needed is for the block, everything that is needed is launched through the opening of the rear right wall. Z cooler lost its staff, which is the case with the case, the one on the processor, which did not chip, but the working middle processor (i5-11600) by a maximum of 40 degrees. This case is suspended above the surface and under the table, ventilation is sufficient, although in reserve you can install a water-cooled three fans on the front panel. There are two holes for 3.5" and 2.5" and they are grasped with a lid, even more conveniently placed. The connectors in the front panel are superficial and sturdily, stiffly steel in their place on the mp. The caps are fastened with bolts and can be dismantled by hand, without twisting. Dodatkovo, under the block of life, there is a saw-sieve. Attached to the case is a purchase of bolts, self-tapping screws, washers, additional supports for the motherboard, in the kit there is also a trim for the video card, it’s solid like on me. Mounting kit for video card, mounting elements, manual fixing/mounting of external covers, space for additional fans and cooling water, as well as a "tower" on the processor Trochy shank top panel ![]() |
The case is not bad, but there are a couple of nuances and contraindications 1. If your video card occupies 3 slots or the motherboard is designed so that you cannot put the video card in the first slot, then the video card will not be able to work stably under loads, as it will not be able to fully cool due to lack of air intake by installing 6 fans, unfortunately the situation is not will change dramatically, the size and layout affect, so if you are reading this review, I cannot recommend this case for purchase Price , Design , Size Bad airflow |
Gamemax H602 configurations
Price for Gamemax H602 | ||||
---|---|---|---|---|
![]() | Gamemax H602 black | from 1 361 ₴ | 36 offers | |
![]() | Gamemax H602 white | from 1 499 ₴ | 4 offers |