Укр|Eng|Рус
Ukraine

Haier ES80V-F1 (GA0GH6E00RU)

Photos - Boiler Haier ES80V-F1
Videos 2Photos 10
Haier ES80V-F1
Main
Typestorage
Energy sourcemains
Installationvertical
Tank volume80 L
Tank shaperectangular
Technical specs
Power source230 V
Power consumption3000 W / 2x1500 Вт /
Max. water temperature75 °C
Tank liningenamel
Water supplywith pressure
Magnesium anode
Heating elements2
Heating element typewet heater
Features
Functionsthermostat
display
Safety systemsoverheat protection
dry heating protection
electrical protection (RCD)
safety valve
anti-legionella
General specs
Controlselectronic
Controls layoutfront
Pipe connectionbottom
Tank manufacturer's warranty7 years
Dimensions (HxWxD)104.6x53x30.5 cm
Weight33.5 kg
Added to E-Catalogaugust 2014
P/N
GA0GH6E00RU

High-tech accumulative electric water heater with a volume of 80 L with electronic control, digital indication and increased heating rate. Refers to models of the upper price category, focused on domestic use. Unlike most conventional water heaters with a cylindrical body, this unit has flat internal tanks, the dimensions of which made it possible to reduce the depth of the body to 30.5 cm.

Due to this arrangement, the Haier ES80V-F1 water heater can be used for vertical wall mounting in rooms with limited free area. Two immersion tubular electric heaters with a durable Incoloy 800 corrosion-resistant jacket provide high heating efficiency throughout the entire service life. Their total power reaches 3 kW (1.5 kW + 1.5 kW), which provides an impressively high speed of heating water (from 15 to 60 °C in just 80 minutes).

The inner tank is made of cold-rolled sheet steel, the surface of which is protected by heat-resistant enamel using UMS technology. Such a tank is designed for operating pressures up to 8 bar, and for additional electrochemical protection against corrosion, there is an oversized sacrificial magnesium anode. The electronic control system supports the function of intelligent heating temperature control. There is protection against overheating, current leakage and a system for suppressing the growth of microorganisms.

Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Haier 2024 - new products, best sales and most actual models Haier.
Video reviews

Haier ES80V-F1 looks modern thanks to its flat body and front panel display. At first glance at the boiler, you might think that this is a model with a large price tag. However, a water heater from a manufacturer of household appliances from the Celestial Empire has a quite humane cost (about $200).

7 year warranty

To protect against corrosion, the heating element of the boiler is equipped with a magnesium anode with a colossal service life for water heaters. If usually the anode should be changed every 2-3 years, then for ES80V-F1 its service life can reach 7 years. It is likely that the calculation was carried out under conditions close to perfect, and with hard water, this element may exhaust its safety margin earlier. But still, 7 years is an impressive figure. By the way, the case also has a 7-year warranty.

Among the huge number of competitors, this boiler model also stands out with antibacterial protection. The effect of this useful function is achieved by heating the water to a high temperature (+80°C). In other boilers, it is also possible to fight bacteria with this kind of heat treatment of the tank. Only often the maximum temperature of water heating (and, therefore, the effectiveness of the procedure) is still lower (+ 70-75 °C).

"Smart" hardware

A distinctive feature of the model is the Smart mode (that is, smart). The benefit of this mode is to reduce energy consumption when one or two people use the boiler in the bathroom. The number of people is indicated in the device settings when Smart mode is activated. And then the boiler will heat the water based on these data — for washing one or two people. By the way, it is convenient that the display shows not only the current temperature, but also the settings of the "smart" mode, a warning about the included antibacterial treatment, etc.

If there are three tenants, then the standard mode will be relevant. You don't have to wait long for it to heat up. Among the "pluses" of this model is increased power (3 kW). Fast heating, judging by the reviews on the Internet, is one of the key qualities of such a technique. If the priority is economical energy consumption, use the potential of ES80V-F1 to "half strength", that is, heat the water with one heating element.

Haier ES80V-F1 configurations

Price for Haier ES80V-F1
Haier ES50V-F1 from 9 020 8 offers
Haier ES80V-F1 from 11 100 2 offers
Haier ES100V-F1 from 16 500 2 offers

Haier ES80V-F1 price graph

    Filters