Hyundai C 1400-185
 | Outdated Product 2 611 ₴ Product type: circular; Type: portable; Power source: mains (230 V); Engine location: transversely; Power (W): 1400; No load blade speed (rpm): 5000; Bar/blade size (mm): 185; Bore diameter (mm): 20; Cutting depth (mm): 65; Weight (kg): 4; |
 |
Hyundai C 1400-185 | ||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Hyundai 2024 - new products, best sales and most actual models Hyundai.
2 0 1 3 |
I bought this saw pecking at the name, in fact it is far from the quality. The first thing I noticed was that the cut is two millimeters from the pointer on the stove. The second - the cut is not vertical (and this is with the factory settings). The third is the absence of a wedging device, which is why the saw simply crushes when working, especially with raw material. And what finished it off was that on the third cut a strange sound arose in the gearbox, as if something had broken off and was tapping. Used for 10 minutes and sent to the service. Name Quality is only in the name. just bought Hyundai C 1400-185 i recommend it don't buy |
Good saw for light tasks
The manufacturer does not hide the fact that the Hyundai C 1400-185 saw belongs to the class of household tools. This is noticeable in terms of price — the tool belongs to the low-cost category.
Despite the good passport data of the circular saw (power 1400 W and maximum cutting depth up to 65 mm), in fact, the limit of its capabilities is working with boards up to 35 mm thick, as well as sheet materials: chipboard, MDF and plastic. Judging by the feedback from users, the saw, although it handles with the dissolution of raw “fifty” boards, is reluctant. In such cases, the "dissatisfaction" of the tool may manifest itself in the form of jamming or overheating.
Nuances of design and equipment
However, the capabilities and characteristics of the circular largely depend on the disc. The regular cutting wheel that comes with the tool is not of high quality. But with this saw, you can use any wood cutting blades with a diameter of 185 mm, in which the mounting hole is 20 mm.
A nice bonus is the ability to work with a guide bar (the guide itself comes with the tool). An unpleasant surprise is a short cable (only 2 m). With such a length of wire, you have to use an extension cord even indoors.
To take or not to take?
Circular Hyundai C 1400-185 is good for small loads and short work. If you are slowly repairing a garage or finishing building a cottage a little bit on weekends, then it will suit you. But a professional carpenter or carpenter should choose a more suitable circular saw as a full-fledged working tool.
