Kingston Fury Renegade RGB DDR4 2x16Gb KF432C16RB1AK2/32
Videos 2Photos 2 | Outdated Product 5 571 ₴ Dual-channel DDR4 RAM kit, consisting of a pair of DDR4 modules with a capacity of 16 GB each. It belongs to the Fury Renegade overclocking line, which is well-deserved love among enthusiasts and gamers thanks to well-chosen chips and memory controllers. It is a mid-range solution in the Kingston Fury Renegade line. It operates out of the box at 3200 MHz (throughput 25600 MB/s) with CL16 latency and a nominal voltage of 1.35 V. The overclocking potential of this memory kit is much higher than that of many mainstream solutions. To open it, you will need a motherboard that supports XMP technology, which already has overclocking profiles sewn into it. To avoid overheating, the Kingston Fury Renegade RGB DDR4 2x16Gb sticks are equipped with branded heat sinks with large metal plates to cool th...e memory chips that are working at the limit. The heat sink is designed in the corporate aggressive style of HyperX Predator (note: this series was replaced by the Fury Renegade line). It copes well with memory cooling during overclocking and rarely gets above 55°C. The top of the heatsink is adorned with fanciful RGB lighting with a bunch of built-in special effects and the ability to sync. The modules are compatible with configurations based on Intel Core processors (6th to 12th generation) and AMD Ryzen processors. |
Kingston Fury KF432C16RB1AK2/32 | |||||||||||||||||||||||||||||||||||||
|
Dual-channel DDR4 RAM kit, consisting of a pair of DDR4 modules with a capacity of 16 GB each. It belongs to the Fury Renegade overclocking line, which is well-deserved love among enthusiasts and gamers thanks to well-chosen chips and memory controllers. It is a mid-range solution in the Kingston Fury Renegade line. It operates out of the box at 3200 MHz (throughput 25600 MB/s) with CL16 latency and a nominal voltage of 1.35 V.
The overclocking potential of this memory kit is much higher than that of many mainstream solutions. To open it, you will need a motherboard that supports XMP technology, which already has overclocking profiles sewn into it. To avoid overheating, the Kingston Fury Renegade RGB DDR4 2x16Gb sticks are equipped with branded heat sinks with large metal plates to cool the memory chips that are working at the limit.
The heat sink is designed in the corporate aggressive style of HyperX Predator (note: this series was replaced by the Fury Renegade line). It copes well with memory cooling during overclocking and rarely gets above 55°C. The top of the heatsink is adorned with fanciful RGB lighting with a bunch of built-in special effects and the ability to sync. The modules are compatible with configurations based on Intel Core processors (6th to 12th generation) and AMD Ryzen processors.
Before buying always check characteristics and configuration of product with online store manager
Catalog Kingston Fury 2024 - new products, best sales and most actual models Kingston Fury.
One of the cheapest options 32gb 3600mhz
Not bad RGB, minimalist. Having fallen not far away, an instance with oaky abilities.
Тут вопрос не так в екземляре как в том, что плашки с маркировкой ******1AK2/** идут "двуранговые" и технически каждый модуль работает как 2. От сюда как плюсы так и минусы. Плюсы- выше средний и low 0.1% FPS если смотреть по играм Минусы- из за переключения между "рангами" на одной плате как результать латентность хуже и разгонный потенциал. Если хочешь всё и сразу то как вариант это 4 одноранговых платнки НО тут нужно быть уверенный в контроллере памяти в ЦПУ(AMD). Если ЦП не "удачный" то 2 модуля могуть взять 3800+ а 4 лашки всего 3400-3600(если контролроллер слабенький попался в ЦП) P.S: Подробней в видео(ближе к середине) https://youtu.be/rVvO4lALUxM?t=8
прежде чем советовать человеку брать 4 плашки, узнайте какая топлогия у его материнки.
Можем ещё поговорить об подсистеме питания ОЗУ и качестве Тока выдаваемом БП. Сомневаюсь что человек покупающий самую бюджетную ОЗУ купил себе топ материнку с Т-топологией. Если I-топология то вопрос снят абсолютно все матери имеют только 2слота под ОЗУ. И последня такзваная Дейзи Чейн это все кроме топов(бюджетки+мидл сегмент) они как раз в силу топологии хуже показывают разгон по частотам но оставляют за собой хорошое сжатие таймингом. И в конец скажу что переменных очень много что бы тут все изложить. Есть тематические ресурсы с массивами данных как от профессионалов по ремонту так и профи по разгону. Чтива не на одну неделю. P.S: точную инфу о топологии материнки так же как и информацию об количества "банков" в чипе памяти ОЗУ не указывает ни один производитель. А это влияет как на потенциал так и зависит прямая производительность на стоковых значениях. |
Having got not far away, a copy of the word zovsim. Do not chase higher than 4000, and the timings are practically not pressed. (Memory Hynix DJR)
In XMR 3600 you can do a great trick - 76ns.
Before that, there were peers Gskill TridenZ 3000mhz (Hynix) which were spliced at 4000mhz with timings 17-19-19-19-34. with a trim 51ns