Thermex Surf 3500 (211 013)

Gravity connection

The compact “flow tank” Thermex Surf 3500 is intended for producing hot water for domestic purposes. The model is suitable for non-pressure water supply systems - when connected to a centralized water supply, a reduction reducer or valve is installed in front of it to regulate the intensity of the flow. A spiral heating element with a power of 3500 W is responsible for heating water in the design of the device. The boiler must be plugged into a reliable grounded outlet, and a 16 A circuit breaker must be installed on the line to it.

Basic performance

With an average flow rate of about 2 l/min. The boiler increases the water temperature by approximately 25 °C. It can be installed either with the terminals facing down or up. At the same time, the model implements protection against dry operation - if there is no water flow, the spiral heater automatically turns off. This prevents potential problems with equipment failure.

Shower head

Out of the box, the Thermex Surf 3500 is equipped with a shower hose with a shower head and a nozzle holder. And for the convenience and speed of installation of the water heater, a special mounting panel on the wall is provided separately. The “flow tank” must be operated in closed heated rooms. It will serve as a convenient solution for small apartments with small kitchens and bathrooms.