Thermex Trend 6000 (211 024)
 | Expecting restock 3 591 ₴ Inexpensive flowing electric water heater of moderate power with electronic control and compact dimensions (installation is carried out taking into account the lower supply). Represents the senior model of the Thermex Trend line of the sample of 2019. Designed for direct connection to a household single-phase network with a voltage of 230 V (current up to 28A, wire cross-section not less than 4 mm²). The manufacturer is positioned as a product of the basic price category, intended for domestic use. Suitable for kitchen sinks, washbasins and showers. Equipped with an automatic start system when the tap is opened and a water flow is created with a slight pressure (from 0.8 bar). When the flow stops or a significant decrease in pressure, the energy supply to the heating element stops. The mai...n advantage of the Thermex Trend 6000 instantaneous electric heater is the high speed of water heating, which compares favorably with storage boilers, which require much more time to set the temperature. Equipped with a durable stainless steel heating element, the power of which is automatically regulated by electronics depending on the set temperature (from 35 to 50 °C). When heated at 25 °C, it develops a capacity of up to 3.4 L / min. |
 |
Thermex Trend 6000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
Inexpensive flowing electric water heater of moderate power with electronic control and compact dimensions (installation is carried out taking into account the lower supply). Represents the senior model of the Thermex Trend line of the sample of 2019. Designed for direct connection to a household single-phase network with a voltage of 230 V (current up to 28A, wire cross-section not less than 4 mm²).
The manufacturer is positioned as a product of the basic price category, intended for domestic use. Suitable for kitchen sinks, washbasins and showers. Equipped with an automatic start system when the tap is opened and a water flow is created with a slight pressure (from 0.8 bar). When the flow stops or a significant decrease in pressure, the energy supply to the heating element stops.
The main advantage of the Thermex Trend 6000 instantaneous electric heater is the high speed of water heating, which compares favorably with storage boilers, which require much more time to set the temperature. Equipped with a durable stainless steel heating element, the power of which is automatically regulated by electronics depending on the set temperature (from 35 to 50 °C). When heated at 25 °C, it develops a capacity of up to 3.4 L / min.
Before buying always check characteristics and configuration of product with online store manager
Catalog Thermex 2024 - new products, best sales and most actual models Thermex.
Touch screen for temperature setting and display
The Thermex Trend 6000 instantaneous electric water heater is an advanced model with a thermostat and a digital display that allows you to adjust the outlet water temperature from 35 °C to 50 °C using touch buttons. The device is designed for universal vertical wall mounting and can be mounted both above and below the sink: all you have to do is orient the 1/2" connecting pipes in the desired position. After that, the water heater automatically determines the type of installation for the correct display of readings on the front panel. The device is quite demanding on the purity of water, as a result of which it is recommended to supply water to it through a coarse filter installed on the water supply system. The device is designed for operation at a minimum pressure of 0.08 MPa, and with an inlet pressure of more than 1 MPa, it is necessary to connect through a reduction gearbox (filter and gearbox are not included in the delivery).
Servicing multiple water points
A feature of the device is electronic control of heating with automatic maintenance of the set temperature in conditions of changes in pressure and temperature of the water at the inlet. In this case, the device independently adjusts the power of the heating coil. The high power of the heating element of 6 kW, made of durable stainless steel, and the “delicate” electronics require a competent electrical connection of the device with a cable of the recommended cross section of 4 mm². A solid heating capacity of 3.4 L/min at ∆t=25 °C, the possibility of pre-setting the water flow and the built-in automatic start-up by opening a tap provide comfortable maintenance of several points of water intake. The water heater received built-in protection against electric shock (class 1), overheating and "dry" inclusion, as well as dust and water protection class IP25. Included with the water heater is a mounting plate with a set of fasteners.