Aerocool Cylon Mini black
 | Outdated Product 716 674 ₴ Very compact case designed to fit a micro-ATX or mini-ITX motherboard. Based on the system unit, you can assemble an entry-level gaming computer. Gaming potential provides the ability to install a graphics adapter up to 300 mm long. For heat dissipation, there are 3 places for the installation of fans. 1 cooler with a diameter of 80 mm is supplied as standard, it is designed for installation on the rear panel. The Aerocool Cylon Mini case received a spectacular design performance. One of the sides is covered with tinted acrylic glass, and the front panel is equipped with RGB lighting in the form of an LED strip. The control panel is located on the top and includes: a Power button, an RGB backlight mode switch, two USB 2.0 ports, one USB 3.0 port, as well as headphone and microphone jacks....It is worth noting that the Reset button is completely absent. This hull model has an "elder brother", made in the form of a medium-sized tower with an identical design. The Mini system unit is perfect for creating a low-cost computer system for home use. |
 |
Close
We recommend products in stockComputer Cases Aerocool →
Aerocool Cylon Mini black
black
whiteChassis Form Factor:Mini Tower
Motherboard size:micro-ATX
PSU power:no PSU
Internal bays 3.5":2
Internal bays 2.5":3
Front panel:USB A 2
Very compact case designed to fit a micro-ATX or mini-ITX motherboard. Based on the system unit, you can assemble an entry-level gaming computer. Gaming potential provides the ability to install a graphics adapter up to 300 mm long. For heat dissipation, there are 3 places for the installation of fans. 1 cooler with a diameter of 80 mm is supplied as standard, it is designed for installation on the rear panel.
The Aerocool Cylon Mini case received a spectacular design performance. One of the sides is covered with tinted acrylic glass, and the front panel is equipped with RGB lighting in the form of an LED strip. The control panel is located on the top and includes: a Power button, an RGB backlight mode switch, two USB 2.0 ports, one USB 3.0 port, as well as headphone and microphone jacks. It is worth noting that the Reset button is completely absent. This hull model has an "elder brother", made in the form of a medium-sized tower with an identical design. The Mini system unit is perfect for creating a low-cost computer system for home use.
All specifications
Specifications Cylon Mini BL
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Aerocool 2025 - new arrivals, bestsellers, and the most relevant models Aerocool.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Aerocool 2025 - new arrivals, bestsellers, and the most relevant models Aerocool.
How to choose a PC case?Basic factors for choosing a stylish computer case with good functionality and efficiency
Shine Bright: Everything You Ever Wanted to Know About PC RGB LightingWe understand how the backlight appeared in the PC, how it is useful, and what synchronization systems are on the market
Series Aerocool Value (gaming, simple)Compare using chart →
5 2 4 3 |
2. price of 750 UAH (it was a year ago, now I don't see the point in buying it) 7. It is impossible to install a 2-fan graphics card in this case because, according to Aerocool's logic, hot air should blow into the HDD and heat it up to 45-48 degrees, moving the HDD to another bay doesn't help. 8. It is practically impossible to do cable management because the holes are not where they should be and they are too small. 9. The opening for the motherboard backplate is too small and I barely managed to fit the backplate in, had to bend it. 10. Incredibly stupid placement of fan installation locations, there are 2 spots for 120 fans on the front panel but according to the logic of the dumb Aerocool designers, the upper fan should press on the wires coming from the front panel, GENIUS. 11. There is no reset button on the front panel which is really stupid.  Yuriy: use Aerocool Cylon Mini BL more than year |
Don't buy this case! Backlight, dimensions It is small, which is logical, it is a small stove, there are two 120 mm and one 92 mm cooler, there is no point, guys, buy any normal case with front blowing, I can recommend Vinga, it is also small, but better! It also has wave glass, and rattles ..., and also it somehow conducts electricity, I don’t know where, I climbed everywhere, thinking that these are the motherboard mounting legs (most likely my jamb) use Aerocool Cylon Mini BL few months |
It seems to be a normal case, but there are some strange childhood illnesses. Not a big case for reasonable money with a bottom-mounted power supply - the bottom opening for the PSU is small and blocks part of the air intake - the transparent cover does not fit well against the case due to screws that are not fully screwed into the case - there were also issues with adding mounts for the motherboard, they were also difficult to screw in - there is no RGB connector for a motherboard with this feature, only powered by HDD and regulated via a button on the case use Aerocool Cylon Mini BL less than month |
3 out of 14 user review(s) shown
10 more user review(s)
1. The thin metal bends with hands (almost like foil)
2. The glass, which is not even glass, is just awful, scratches from the air and is almost opaque.
3. The holes for the bolts that hold the video card were too narrow, and no screws fit in, had to gouge it open
4. The standoffs holding the motherboard were installed crookedly, and when trying to straighten them, the metal bent, and the standoff fell out; for some motherboard holes, there were not even places for installing standoffs
Here are the cons made by the clumsy engineers of Aerocool:
5. For some reason, probably due to stupidity, it is impossible to create proper cooling and airflow in the case, according to Aerocool engineers, the CPU cooler should draw air from the top of the case, where there is a dust filter, but the problem is that hot air comes OUT through these holes, so the dust filter is just pointless. When using the standard AMD cooler (Wraith Stealth), hot air escapes into the corner between the top of the case and the air intake holes, warming the case significantly
6. The mesh on the power supply barely holds and constantly falls off