HPI Racing Bullet ST Flux 4WD RTR 1:10 (110662)

Photos - RC Car HPI Racing Bullet ST Flux 4WD RTR 1:10

Videos ₂Photos ₁₈

Outdated Product

Model scale: 1:10; Purpose (class): stunt; Type: sUV (monster); Motor: for injectors; Drive: all-wheel; waterproof; dirt protection; centre differential; metal main pair; anti-roll bars; metal deck chassis; Dimensions (mm): 417x336x160;

We recommend products in stockRC Cars HPI Racing →

Remo Hobby Mmax Brushed 1:10

from 6 450 ₴

RTR, scale: 1:10, monster truck, stunt, motor: electro, drive unit: all-wheel

compare

Remo Hobby Trial Rigs Truck 4WD 1:10

from 8 990 ₴

RTR, scale: 1:10, crawler, stunt, motor: electro, drive unit: all-wheel

compare

Remo Hobby Mmax Brushless 1:10

from 8 480 ₴

scale: 1:10, monster truck, stunt, motor: electro, brushless, drive unit: all-wheel

compare

Silverlit Aqua Cyclone 1:10

from 784 ₴

scale: 1:10, stunt, motor: electro, drive unit: rear, up to 12 km/h

compare

Silverlit 360 Tornado 1:18

from 1 399 ₴

scale: 1:10, stunt, changeling, motor: electro, drive unit: rear, up to 15 km/h

compare

HPI Racing Bullet ST Flux 4WD RTR 1:10

differential stabilization brushless

Type:monster truck, stunt

Model Scale:1:10

Engine:electric

Drive unit:all-wheel

Functions:centre differential

Base length:272 mm

The wing increases downforce. The waterproof speed controller has a fan for cooling. Possibility of complete reconfiguration of the speed controller. Weatherproof battery compartment, receiver, steering servo and speed controller

Not designed to be completely submerged in water. You need to buy a battery and charger. Can be powered by both 7-Cell Ni-Mh battery and 3S Li-Pol

All specifications

Specifications Bullet ST Flux 4WD RTR 1:10

Main
Model scale	1:10
Purpose (class)	stunt
Type	sUV (monster)


Specs
Motor	for injectors
Motor model	brushless, Flux ММХ-4000KV / speed controller Flux EMH-3S /
Drive	all-wheel
Shock absorbers	2 oil filled shock absorbers per wheel
Features	waterproof dirt protection centre differential metal main pair anti-roll bars metal deck chassis / aluminium /

Transmitter
Radio frequency	2.4 GHz
Power source	4хАА


General
Base length	272 mm
Material	plastic
Dimensions (LxWxH)	417x336x160 mm
Added to E-Catalog	October 2018
P/N	110662

Report description mistake

The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog HPI Racing 2025 - new arrivals, bestsellers, and the most relevant models HPI Racing.

Additional features rc car HPI Racing Bullet ST Flux 4WD RTR 1:10:

To reduce the centre of gravity, the rudder servo is located in the "lying" position
The speed controller is centrally mounted at the rear where it can get maximum cooling air.
Ball bearings fitted with rubber boots
6061 aluminium alloy main chassis plate
Reinforced bumper at the rear and front of the chassis
Special metal washers prevent overtightening of wheel nuts
Servo steering SF-10W
In the event of a loss of communication or low power, the failsafe function will bring the machine to a safe stop.
Standard 12mm nylon hex wheel adapter mounted on each axle shaft

Filters

Models

on sale all

Brands

BB Junior Chicco KS Drive Maisto Nikko Overmax Rastar Remo Hobby Silverlit Subotech Sulong Toys TAMIYA Traxxas WL Toys ZIPP Toys All brands

(model scale)

1:10

Out of stock

Bullet ST Flux 4WD RTR 1:10

Questions and requests regarding model selection →