Tecsar AHDD-1M-20F-Out
 | Outdated Product 799 ₴ Mount: outdoor; Body type: dome; BNC; light sensor; IR illumination; Matrix type: CMOS; Matrix size: 1/3"; Number of megapixels: 1.3; Video resolution (px): 1280x960; Frame rate (fps): 30; Material: metal; |
 |
Tecsar AHDD-1M-20F-Out | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Before buying always check characteristics and configuration of product with online store manager
Catalog Tecsar 2024 - new products, best sales and most actual models Tecsar.
The Tecsar AHDD-1M-20F-out AHD camcorder is equipped with a high-sensitivity 1/3-inch Sony IMX225 matrix, with a matrix resolution of 1.3 megapixels. This allows you to record video not only in 720p resolution, but also in 960p (1280x960) mode, getting a more detailed picture. However, in the latter case, the DVR must also support 960p mode, otherwise the device will work in a compatible 720p mode. This model can work with a connection cable length of 500 m or even more, it is fully functional even with a cable length of 800 m, if there are no strong sources of electromagnetic interference nearby.
The model is equipped with 24 infrared LEDs that illuminate the area at night. The range of night illumination is 20 m. As in other similar devices, the inclusion of IR illumination is automatically controlled by a photoresistor that determines the external illumination.The tightness of the case meets the high standard of protection IP66, which means that the electronics of the device are reliably protected from dust and moisture.
Microprocessor control is based on the Nextchip NVP2430H chip. Thanks to it, not only basic image settings are provided - adjusting brightness, contrast, white balance, etc., but also advanced functions, including 3DNR (Digital Noise Reduction) three-dimensional noise reduction. When using 3DNR noise reduction, the processor performs noise calculations not only for one frame, as in the 2DNR function, but for several consecutive frames at once. This allows you to more accurately highlight the noise, since it changes most over time, in contrast to the main image. And the flicker-free function makes this model applicable in the area of active fluorescent light sources that flicker in time with the mains frequency. The camera has its own OSD menu, which allows you to individually adjust its characteristics and carry out advanced fine-tuning, for example, highlighting private blind areas, motion detection areas, etc.
The mount provides the possibility of mounting the camera on the ceiling or on the wall, and the position of the lens is freely adjustable along three axes.
