Deepcool Matrexx 70 ADD-RGB 3F black (DP-ATX-MATREXX70-BKG0P-3F)
![]() | Expecting restock 4 719 ₴ One of Deepcool's flagship cases. This is a very roomy and stylish platform of the standard size MidiTower. Inside the device, both a full-format E-ATX motherboard and all its lower derivatives (ATX, microATX, Mini-ITX) are easily placed. The length of discrete graphics can reach a record 380 mm. At the same time, the case has the ability to install a graphics adapter both vertically and horizontally. The height limit for CPU tower is 170mm. The Deepcool Matrexx 70 ADD-RGB 3F case received four standard fans out of seven possible out of the box. So, three 120-mm impellers with ARGB illumination are mounted on the front panel. Another 120 mm impeller is blown out from behind (this cooler is not backlit). But at the same time, there is additional illumination on the side of the compartment u...nder the power supply. The front panel and the right side are made of tempered glass, and there is an additional glass insert on the top cover of the power supply protective cover. Its task is to mirror the internal glow of the case, which creates an interesting decorative effect. The bottom of the case is a solid fine-mesh mesh, thanks to which the power supply unit can “breathe” freely. |
User reviews: Deepcool Matrexx 70 ADD-RGB 3F | Add Review | 0 0 2 3 |
Useful Review? Yes3 No0 |
A good case with generally good fans in the kit. The fasteners are excellent and there are neatly folded cables from the PC switching board and LGBT backlight in advance. Enough clamps. You don’t need to break off the plate at the back for the video camera; everything is held on by bolts, a small thing, but nice. There is one more aesthetic detail: for some reason they added space for a third tempered glass inside the case - it’s beautiful, yes, but it’s not clear why :0 I didn't really see any flaws, except for the slightly scratched tempered glass inside the case. This is probably due to my carelessness, but when you buy a case with RGB, there will be 3 fans included, not 5 as shown in the store pictures. Please pay attention to this so it won't be disappointing when you purchase. ![]() |
Useful Review? Yes1 No0 |
A masterpiece, the best case for your money: built-in rzhb turntables (it’s better to buy additional ones), cold, roomy, there are as many as 3 hardened ones! Check comm... No ![]() |
Useful Review? Yes0 No0 |
top cool great black monster the window won't close and I'm hot. ![]() |
Useful Review? Yes0 No0 |
After a year and a half of life with this case, I can form a more complete opinion about it. I must say right away that in my case I was not lucky with the batch, and even after returning the goods and re-ordering, the case arrived with the same flaws, so I just put up with it. I will describe the cons in the cons column. Roomy, good ventilation, high-quality quiet turntables, convenient cable management. The front window open button does not work. The latches of the glass are released, but apparently it is designed to fall out under its own weight, which does not happen. You have to click back and press again. It works only 1 time out of 10. You can paste a piece of electrical tape and pull on it, but this will spoil the design and generally collective farm. And no, you can't poke it with your fingernail. Next, about the side glass, which does not fall out after removing the bolts. The upper left corner comes out freely, and the right one rests against the top cover. Through measurements, I found out that it was the racks on which the glass below becomes to blame. Between the plastic strip and the metal there are several perpendicular strips, and the rightmost one is 1mm higher than the others. And I have absolutely no idea how to shorten it through this gap without breaking the plastic casing. I will also mention the magnets on the top dust filter, which are peeled off from the latter, and surprisingly even superglue could not hold them in place. ![]() |
Useful Review? Yes0 No0 |
A good case with a big BUT If you have a hot setup, be prepared to keep the front cover open (visually, the case becomes not as pretty) with the dust cover and closed lid airflow becomes useless The difference on the video card (using 3080ti) is ~7-8 degrees with the cover open/closed at case fan speeds of ~60% Case build quality Poor ventilation in a closed housing use Deepcool Matrexx 70 ADD-RGB 3F few months |
Add Review