Deepcool Matrexx 70 ADD-RGB 3F black (DP-ATX-MATREXX70-BKG0P-3F)
 | 6 543 ₴ Buy!  Корпус Deepcool Matrexx 70 ADD-RGB 3F (DP-ATX-MATREXX70-BKG0P-3F)Timesport.in.ua5 year with us (Lviv) Report |
 |
One of Deepcool's flagship cases. This is a very roomy and stylish platform of the standard size MidiTower. Inside the device, both a full-format E-ATX motherboard and all its lower derivatives (ATX, microATX, Mini-ITX) are easily placed. The length of discrete graphics can reach a record 380 mm. At the same time, the case has the ability to install a graphics adapter both vertically and horizontally.
The height limit for CPU tower is 170mm. The Deepcool Matrexx 70 ADD-RGB 3F case received four standard fans out of seven possible out of the box. So, three 120-mm impellers with ARGB illumination are mounted on the front panel. Another 120 mm impeller is blown out from behind (this cooler is not backlit). But at the same time, there is additional illumination on the side of the compartment under the power supply. The front panel and the right side are made of tempered glass, and there is an additional glass insert on the top cover of the power supply protective cover. Its task is to mirror the internal glow of the case, which creates an interesting decorative effect. The bottom of the case is a solid fine-mesh mesh, thanks to which the power supply unit can “breathe” freely.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Deepcool 2025 - new arrivals, bestsellers, and the most relevant models Deepcool.
0 0 2 3 |
Useful Review? Yes0 No0 |
top cool great black monster the window won't close and I'm hot.  Sushinskiy Vladislav: use Deepcool Matrexx 70 ADD-RGB 3F few months |
Useful Review? Yes0 No0 |
After a year and a half of life with this case, I can form a more complete opinion about it. I must say right away that in my case I was not lucky with the batch, and even after returning the goods and re-ordering, the case arrived with the same flaws, so I just put up with it. I will describe the cons in the cons column. Roomy, good ventilation, high-quality quiet turntables, convenient cable management. The front window open button does not work. The latches of the glass are released, but apparently it is designed to fall out under its own weight, which does not happen. You have to click back and press again. It works only 1 time out of 10. You can paste a piece of electrical tape and pull on it, but this will spoil the design and generally collective farm. And no, you can't poke it with your fingernail. Next, about the side glass, which does not fall out after removing the bolts. The upper left corner comes out freely, and the right one rests against the top cover. Through measurements, I found out that it was the racks on which the glass below becomes to blame. Between the plastic strip and the metal there are several perpendicular strips, and the rightmost one is 1mm higher than the others. And I have absolutely no idea how to shorten it through this gap without breaking the plastic casing. I will also mention the magnets on the top dust filter, which are peeled off from the latter, and surprisingly even superglue could not hold them in place. Nikolay: use Deepcool Matrexx 70 ADD-RGB 3F more than year |
Deepcool Matrexx 70 is a stylish, massive and far from the cheapest computer case with addressable illumination, which is positioned by the manufacturer as a "new concept, specially designed for the pleasure of self-assembly." The layout of Deepcool Matrexx 70 pays homage to modern fashion, when 5.25 bays are sent to the scrap, and 3.5 trays are hidden under the cover of the power supply to free up more space inside. Thanks to this approach, inside Matrexx, the user can install a full-size E-ATX motherboard and a massive graphics card up to 380 mm long.
By comparison, most cases in this class are limited to standard ATX motherboards and graphics cards up to 360mm long. Even more convenient, the video adapter can be placed both horizontally and vertically. You can also install a processor cooler up to 170 mm high and a power supply unit up to 200 mm in size into the case. However in the latter case, the laying of wires will be difficult. As for the fun of self-assembly, it seems to be about the thumbscrews and additional racks for mounting.
Four regular fans of different types are pre-installed inside the case, which is not very convenient. The three main turntables are placed on the front panel and are equipped with addressable lighting, which creates the illusion of three luminous circles during operation. Additional illumination is hidden on one of the sides under the power supply. We have already seen this approach to illumination a thousand times, so the guys from Deepcool went to the trick, using additional glass inserts inside the case, which reflect the internal glow in an interesting way. Especially for the hardcore Scandinavian gamers, Deepcool has released a classic black version of the Matrexx 70 without backlight and at a more affordable price. Still, by the standards of Deepcool, this version turned out to be somewhat more expensive than expected.
