Aardwolf Performa 10X (APF-10XPFM-120)
![]() | Outdated Product 1 257 ₴ Features: for CPU; Product type: air cooler; Fan size (mm): 120; Max. revolutions (rpm): 2000; Speed controller: auto (PWM); Noise level (dB): 35; Power source: 4-pin; Heat pipes: 5; Heatpipe contact: indirect; Heatsink material: aluminium / copper; Plate material: copper; Socket: AMD AM2/AM3/FM1/FM2 |
Aardwolf Performa 10X
Type:air cooler
Suitable for:for CPU
Socket Intel:775, 1150, 1155/1156, 1366, 2011/2011 v3, 2066, 1151/1151 v2, 1200
Socket AMD:AM2/AM3/FM1/FM2, AM4
Fan:⌀ 120 mm
Revolutions:up to 2000 rpm
Heat pipes:5
TDP:180 W
Height:151 mm
All specifications
Specifications Performa 10X
|
|
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Aardwolf 2025 - new arrivals, bestsellers, and the most relevant models Aardwolf.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Aardwolf 2025 - new arrivals, bestsellers, and the most relevant models Aardwolf.

Air or liquid cooling — which is better?Which type of cooling to choose depending on the purpose of the PC

Which CPU cooler to choose?Nuances of choosing a CPU cooler that guarantee safety, durability and quiet operation of the PC
got it today, thought I'd install it on AM4 right away... one bolt's thread is completely ruined, the nut doesn't screw on at all. Well, I thought it happens, replaced it with another suitable one. Tightened three nuts but the fourth nut gets around the bolt... that thread is dead too, so I had to get creative, there are a couple more tricks but that's okay. The cooler itself is good quality, heavy, blows at 2k, the radiator is also of good quality, heavy, the base is smooth like my ex's but okay, it's worth its money in quality and stands firm, doesn't wobble! I bought it for half ryzen 5 3600, there was a box that was 80, I bought this one for about the same, don't know what's the matter. The paste is MX-5 if anything. The radiator is cold but the processor is hot. I think the voltage needs to be reduced from 1.4 to 1.25. blows well, high-quality tower) attached bolts ![]() |
It's a good cooler, good build quality, good looks with a blackplate to support the motherboard, rounded bolts to avoid scratching the mat. fee. But do not believe the characteristic of its maximum TDP of 130-140 and no more, my i9900k choke under it. And if you have a smaller processor, then take it with confidence In general, everything is fine TDP less than specified ![]() |
2 out of 3 user review(s) shown
1 more user review(s)