DeWALT D25143KB
 | Expecting restock 7 599 ₴ Operating modes: hammer drilling; drilling only; chiselling (demolition hammer); Power consumption (W): 900; Impact energy (J): 3; Number of thrusts (bpm): 5350; Rotation speed (rpm): 1450; Reverse: brush; Functions: safety clutch; Power source: mains (230 V); Weight (kg): 3.1; |
 |
Close
We recommend products in stockRotary Hammers DeWALT →
hammer drilling, 4400 bpm, without a hit, 1200 rpm, chiselling, 880 W, 3 J, weight 2.9 kg
hammer drilling, 4100 bpm, without a hit, 850 rpm, chiselling, 1250 W, 3.5 J, weight 5.4 kg
hammer drilling, 4400 bpm, without a hit, 1200 rpm, chiselling, 880 W, 3 J, quick cartridge change, weight 3.1 kg
hammer drilling, 4100 bpm, without a hit, 850 rpm, chiselling, 1250 W, 3.52 J, weight 5.4 kg
DeWALT D25143KB
6 drills
without drillsOperating modes:hammer drilling, without a hit, chiselling
Power:900 W
Impact energy:3 J
Number of strokes:5350 bpm
Idle speed:1450 rpm
Cartridge type:SDS+
Power supply:mains (230 V)
Weight:3.1 kg
Model D25143K is supplied without drills, and D25143KB includes a set of drills (6 pcs)
All specifications
Specifications D25143KB
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog DeWALT 2025 - new arrivals, bestsellers, and the most relevant models DeWALT.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog DeWALT 2025 - new arrivals, bestsellers, and the most relevant models DeWALT.
I have been familiar with DeWalt tools for a long time, and over time, this affinity only grows stronger. I think anyone who has dealt with their equipment might express a similar opinion. Yes, they are quite expensive, but even their household tools often surpass a good half of the "professional" Chinese models. In short, I don't mind spending money on good quality tools. I work in the installation of air conditioning systems, drilling walls of various thicknesses and strengths, and as you understand, without a rotary hammer, it's like being without hands. I chose this "household" model from DeWalt based on its combination of features; it may not work for an hour without interruption, but it can quickly make up to two dozen holes in load-bearing concrete walls without much effort. From my own experience, I can say that DeWalt's 900W are worth one and a half kilowatts of pure Chinese. In concrete, it can drill with drills up to 28 mm in diameter, and it does it quickly and cheerfully, the engine pulls out such a load without really slowing down. Adjustment of speed of rotation, naturally, electronic, with soft start-up. A brick in hammer drilling mode generally goes through like butter, with almost no serious resistance. There is a slight heating, but I can work for 20-25 minutes without long breaks and this is usually enough for me. It weighs a little more than three kilograms, it holds comfortably in the hands, the handles are ergonomic, the mode switch and reverse are exactly where they should be. One-year warranty, but when registering on the site, you can extend it to a three-year one! It will be necessary to do this, but the hands do not reach in any way. These are almost the most expensive "household" rotary hammers on our market. In fact, this amount already falls within the range of a lot of semi-professional tools from many budget brands. |
1 out of 3 user review(s) shown
2 more user review(s)
Video reviews
Перфоратор DeWalt D25143K обзор
23 April 201811 297 view
Перфоратор DeWalt D25143K
8 November 20176 828 view