DeWALT D25143K
Videos 12Photos 20 |
|
|
Before buying always check characteristics and configuration of product with online store manager
Catalog DeWALT 2024 - new products, best sales and most actual models DeWALT.
Buy DeWALT D25143K
All prices 22 →DeWALT D25143K | 6 999 ₴ | ||||
Перфоратор DeWalt D25143K | 6 999 ₴ | ||||
Перфоратор мережевий SDS-Plus DeWALT D25143K | 6 999 ₴ | ||||
Перфоратор мережевий SDS-Plus DeWALT D25143K (D25143K) | 6 999 ₴ | ||||
Перфоратор DeWalt (D25143K) | 6 999 ₴ |
I have been familiar with Dewalt's instrument for a long time and over time this sympathy only grows stronger. I think that everyone who has come across their technique can express approximately the same opinion. Yes, it costs a lot, but even their household tools are in many ways superior to a good half of the "professional" Chinese models. In short, I don’t feel sorry for the money for a good working tool. I am engaged in the installation of air conditioning systems, I drill walls of different thicknesses and strengths and, as you understand, without a rotary hammer, it’s like without hands. DeWalt took this "household" model based on the combination of characteristics, maybe an hour without a break it will not work, but this rotary hammer is able to quickly make up to two dozen holes in load-bearing concrete walls without particularly straining. From my own experience, I can say that DeWalt's 900W are worth one and a half kilowatts of pure Chinese. In concrete, it can drill with drills up to 28 mm in diameter, and it does it quickly and cheerfully, the engine pulls out such a load without really slowing down. Adjustment of speed of rotation, naturally, electronic, with soft start-up. A brick in hammer drilling mode generally goes through like butter, with almost no serious resistance. There is a slight heating, but I can work for 20-25 minutes without long breaks and this is usually enough for me. It weighs a little more than three kilograms, it holds comfortably in the hands, the handles are ergonomic, the mode switch and reverse are exactly where they should be. One-year warranty, but when registering on the site, you can extend it to a three-year one! It will be necessary to do this, but the hands do not reach in any way. These are almost the most expensive of the "household" punchers on our market. In fact, this amount already includes a lot of semi-professional tools of many low-cost brands. |
Rotary hammer for installers
DeWALT D25143K is a classic three-mode multi-purpose rotary hammer. His element is assembly work. If you need to quickly make 10 – 50 holes in a concrete floor or masonry, then the DeWALT D25143K will easily cope with this task. Do you need to drill a metal corner, knead a mortar or cut a hole with a bimetal crown? The perforator is on the shoulder. But during intensive dismantling work with classic demolition hammers, he will not be able to compete.
Professional approach to the design of rock drills
Due to the fact that the tool weighs only 3.1 kg, if necessary, you can work with one hand. But it is better to use an additional rubberized handle to relieve your hands. It rotates and locks into position. A depth gauge with markings is attached to the handle.
The keyless chuck is compatible with all drills and drills of the SDS+ standard. Between the gearbox and the chuck there is a safety clutch that helps out when the tool is jammed. Given the high "rate of fire" (up to 5350 beats / min) and high impact energy (3 J), it is recommended to use DeWALT branded equipment or high-quality drills, chisels and drills from other well-known manufacturers in order to avoid cartridge loosening.
The DeWALT D25143K has electronic speed control: the harder you press the start button, the faster the cartridge rotates (in shock mode, the frequency of impacts increases or decreases accordingly). There is a button lock in the on state to fix the selected speed.
Reliable and durable, but "hard"
The DeWALT D25143K is perfect for installers looking for a reliable and durable tool for drilling holes for anchors, dowels and other fastening systems. But it is worth remembering that, despite the presence of the AVC anti-vibration system, the rotary hammer is “harsh” in shock mode. In the case of prolonged work, it is worth using anti-vibration gloves, or even better — pick up a tool equipped with an active damper.