Dnipro-M GL-160SE (19419000)
 | Outdated Product 1 901 ₴ Type: angle grinder; Power consumption (W): 1100; Rotation speed (rpm): 5400 – 10000; Max. disc diameter (mm): 150; Power source: mains (230 V); Weight (kg): 2.6; |
 |
Close
We recommend products in stockGrinders & Polishers Dnipro-M →
Dnipro-M GL-160SE | |||||||||||||||||||||
| |||||||||||||||||||||
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Dnipro-M 2025 - new arrivals, bestsellers, and the most relevant models Dnipro-M.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Dnipro-M 2025 - new arrivals, bestsellers, and the most relevant models Dnipro-M.
How to choose an angle grinderBrief instructions for choosing a grinder
How does an expensive grinder differ from a cheap one?Design features and other factors affecting the quality and price of an angle grinder
0 2 1 4 |
Pleased with the Bulgarian, she is practically unkillable. Not afraid of dust at all. Pleased with the presence of a soft start. Rubberized handle, weight, price, cuts concrete, metal calmly and evenly no |
I liked the grinder very much at work, it is light, it cuts perfectly and nothing happened to her for a long time. It doesn't overheat which is important. Comfortable to hold and operate. Price, quality, weight ....  Hamadun: use Dnipro-M GL-160SE few months |
I'm writing a review for those who are on the fence about buying or not. Let me start by saying that for those who aren't aware, this angle grinder is not designed for a 150mm disc. It has enough power to work with it, but the overload protection kicks in quite often. Many first-time users might be alarmed, but this happens because the grinder runs at 10500 RPM, while a 150mm disc typically requires 7-8 thousand RPM. To explain simply for those who don't know, the larger the disc, the fewer the RPM needed, and the higher the wattage required. If you use a 125mm disc, it will last longer than Bosch or Metabo. This angle grinder is made of durable plastic, with each part having its own mold in the casing. It includes a noise filter capacitor for the network, an electronic block with overload protection, soft start, and speed control. The gearbox has thick walls, plenty of lubrication, and the spindle shaft is press-fitted without a key and rests on a needle bearing. The gearbox is attached to the housing with long bolts, which are sealed with adhesive. The stator and rotor are armored; the rotor is banded and coated with a thick layer of lacquer. The branded bearings are protected from dust by a damping rubber. - Not a high price - Stator and rotor shield - Strong and reliable housing and gearbox - Long handle - Overload protection, soft start, speed controller - Good bearings - High-quality and long power cable - Three-year warranty - No vibration during operation - Powerful motor allows for extended work periods - Not suitable for cutting concrete, brick, or grooving with a 150 disc, the protection activates every one and a half minutes, no problems with a 125 disc. - The spindle lock doesn't look very reliable. - The additional handle is not rubberized, considering the grinder is heavy, it would have been helpful. use Dnipro-M GL-160SE less than month |
3 out of 7 user review(s) shown
4 more user review(s)
