Logicpower LP-X5 Premium 5m Black (9585)
![]() | Expecting restock 455 ₴ Product type: surge protector; Cable length (m): 5; Max. power (W): 3500; Max. load (A): 16; Max. energy absorption (J): 150; Plug type: on camera flashes; Grounded sockets (type F): 5; Protection: short circuit; overload; voltage surges (varistor); fuse: automatic fuse; Size (mm): 253x50x40 |
Logicpower LP-X5 Premium 5m Black | |||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
The information in the model description is for reference purposes.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Logicpower 2025 - new arrivals, bestsellers, and the most relevant models Logicpower.
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Logicpower 2025 - new arrivals, bestsellers, and the most relevant models Logicpower.
Inexpensive Five sockets Off button Thick power cable The contacts in the sockets became loose very quickly, even if they were not used often. The bulb in the off button burned out. ![]() |
Add Review
The power strip has 5 sockets, Eurostandard with grounding. Next to the cable, there is a power switch button. When it's on, the LED light inside the switch glows, although after a few years, its brightness has significantly decreased and now barely glows. The cable is quite thick and massive, clearly designed for high voltage. There are holes on the back of the case to hang the power strip on the wall using screws.
I bought it in August 2020, and now I feel the sockets are a bit loose. The charging adapter has a lot of play and loses contact. In my opinion, this is bad, as my previous one worked for ten years without this issue. But here, after 4 years, and I didn't even unplug it that often, usually just once plugged in and left it. The furthest socket is where I constantly placed the charger, but the one next to it and the third one are also loose, I'm not sure about the fourth and fifth, maybe the same issue. I'll need to take it apart and tighten the plates.