1stPlayer RB-4-1G6 black
 | Outdated Product 1 359 ₴ Attractive in appearance and roomy game case in Midi Tower format. The gaming purpose of the box is hinted at: spectacular RGB lighting, a large viewing sidewall, as well as a modern chassis design. The front panel is equipped with an LED strip with customizable RGB lighting. The choice of the glow mode and shade is carried out by the button on the control panel. The 1stPlayer RB-4-1G6 computer case received a pre-installed fan on the back wall, while a fixed RGB backlight is mounted in the standard cooler, but its shade and glow modes are not configurable. The layout of the chassis is characterized by the lower location of the power supply, the place for its installation is blocked by a metal plate, which will allow you to hide the wiring and the rack with memory drives. Inside the platfo...rm, it will be possible to put two 3.5″ devices and two more 2.5″ SSDs. To prevent the components from getting too hot, the top cover of the platform has a large ventilation channel. The CPU mounting location can accommodate a processor up to 165 mm high. The length of the graphics card is limited to 300mm. The case can accommodate a good computer assembly for games, all kinds of multimedia entertainment and study. |
 |
Attractive in appearance and roomy game case in Midi Tower format. The gaming purpose of the box is hinted at: spectacular RGB lighting, a large viewing sidewall, as well as a modern chassis design. The front panel is equipped with an LED strip with customizable RGB lighting. The choice of the glow mode and shade is carried out by the button on the control panel. The 1stPlayer RB-4-1G6 computer case received a pre-installed fan on the back wall, while a fixed RGB backlight is mounted in the standard cooler, but its shade and glow modes are not configurable.
The layout of the chassis is characterized by the lower location of the power supply, the place for its installation is blocked by a metal plate, which will allow you to hide the wiring and the rack with memory drives. Inside the platform, it will be possible to put two 3.5″ devices and two more 2.5″ SSDs. To prevent the components from getting too hot, the top cover of the platform has a large ventilation channel. The CPU mounting location can accommodate a processor up to 165 mm high. The length of the graphics card is limited to 300mm. The case can accommodate a good computer assembly for games, all kinds of multimedia entertainment and study.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog 1stPlayer 2025 - new arrivals, bestsellers, and the most relevant models 1stPlayer.
The worst among those I've ever had. The front panel is solid with no air intake at all. There are no dust filters, although there is structurally space for them. The packaging lacked screws and brackets for mounting an ATX board. With such a design, it is impossible to connect 2 SSDs because the connectors hit the motherboard. The power connection to the SSD is too far from the bracket holes, so forget about neat cable management. Where and how to install 3.5-inch drives is known only to the developer's twisted imagination. There's little space for cables, and even if you manage some semblance of cable management, be prepared that the back panel is held only by 4 out of 6 mounts, as the bottom ones are not even provided on the case (though they are on the cover). The button to switch the lighting doesn't work out of the box. The power for this lighting comes from an outdated Molex connector. It has a glass wall Absolute ill-conceivedness of the case in everything: from the placement and power supply of components, to the complete absence of air circulation  Aleks Gabun: use 1stPlayer RB-4-1G6 less than month |