from 1 473 ₴gaming mouse, wireless, radio / wired, USB A, buttons: 5, programmable, + wheel, Kailh, weight adjustment, RGB backlight, sensor 10000 DPI, in box: replaceable top panels
from 3 465 ₴gaming, Mini Tower, micro-ATX, no PSU, front panel: USB A 2, USB C 1, fan backlight, ≥ 4 fans
from 959 ₴play (for kids), membrane, combined, wireless, radio / wired, USB, ultra-compact (JIS), without Num-block, backlight
from 1 199 ₴gaming, very big, 1200x550x4 mm, coating speed, top fabric, bottom rubber, stitched
from 953 ₴air cooler, per processor, AMD: AM2/AM3/FM1/FM2, AM4, Intel: 1150, 1155/1156, 1366, 1151/1151 v2, 1200, 1700, fan: 1, 92 mm, 2400 rpm, maximum TDP 180 W, height: 135 mm, backlight, UV glow, backplate mount
from 8 999 ₴gaming, seat: 38x50 cm, fabric, leatherette, backrest: 83 cm, fabric, leatherette, mechanism: rocking, adjustment: inclination, heights, stiffness
from 3 999 ₴gaming (gaming), 1200x600x750 mm, height adjustment is absent, cable hole, headphone holder, cup holder
from 999 ₴gamepad, wireless, for: PC (Windows), PS3, Android, iOS, 10 buttons, work: up to 30 h
from 699 ₴gaming mouse, wired, USB A, buttons: 5, programmable, + wheel, RGB backlight, sensor 16000 DPI
from 1 913 ₴gaming, Mini Tower, micro-ATX, no PSU, front panel: USB A 3, fan backlight, ≥ 4 fans
from 588 ₴play (for kids), membrane, wired, USB, ultra-compact (JIS), without Num-block, backlight
from 552 ₴gaming, very big, 940x450x4 mm, coating speed, top fabric, bottom rubber, stitched
from 1 322 ₴air cooler, per processor, AMD: AM2/AM3/FM1/FM2, AM4, Intel: 775, 1150, 1155/1156, 1366, 2011/2011 v3, 1151/1151 v2, 1200, fan: 2, 120 mm, 1700 rpm, maximum TDP 180 W, height: 156 mm, backlight, UV glow
from 6 499 ₴gaming, seat: 38x50 cm, fabric, leatherette, backrest: 83 cm, fabric, leatherette, mechanism: rocking, adjustment: inclination, heights, stiffness
from 5 599 ₴gaming (gaming), 1360x600x710 mm, height adjustment manual, maximum 810 mm, RGB backlight, headphone holder, cup holder
from 906 ₴gaming mouse, wireless, radio / wired, USB A, buttons: 6, + wheel, Huano, RGB backlight, sensor 7500 DPI
from 2 299 ₴gaming, Midi Tower, ATX, no PSU, front panel: USB A 3, fan backlight, ≥ 4 fans
from 462 ₴play (for kids), membrane, wired, USB, standard (JIS), with Num-block, backlight
from 589 ₴gaming, very big, 800x450x3 mm, coating speed, top fabric, bottom rubber, stitched
from 822 ₴air cooler, per processor, AMD: AM2/AM3/FM1/FM2, AM4, Intel: 775, 1150, 1155/1156, 1366, 1151/1151 v2, 1200, 1700, fan: 1, 90 mm, 1700 rpm, maximum TDP 130 W, height: 130 mm, backlight, UV glow
Purple Sun: use 2E GAMING GALAXY less than month
Included in the set of installations (screws on two pillars behind the right opaque cover) is a fan hub (for 4 3pin fans, one is left unoccupied) and RGB (4 trippins for 5v, all are occupied). The hub is powered by sata, there are no fans - all fans that are connected to the hub will be oiled at the next time when the PC is turned on (especially I have included only the rear fan in the hub in sight, and two of them in the motherboard). Turning RGB either through the button of the case or through the motherboard (for example, on your є input 3pin to 5v, on mine only 4pin to 12v, to that, only the button on the case).
Two sawn filters (behind the front cover in front of a white color, a black beast). Three 120mm fans of the same brand, from the stink box are installed 2 in front of the beast and 1 in the rear (just rearranging one of the beast to blow in front). Bottom zvichayny pilovy filter for the BZ.
The case is thin ale to finish the mіtsniy, only the box pіd xdd nibi from the cardboard of crushing - there I would definitely not put the xdd yakbi vin in my buv. Open for cables normally, rounded ones are required.
The set also includes ties, bolts and studs (more are already installed, two in a package).