Vinga CS311 white
 | Outdated Product 1 669 ₴ First of all, this model attracts attention with its external design — this is a rather stylish box, which was created in a compact Mini Tower form factor. The model weighs 3.9 kg, which is due to the use of good 0.7 mm thick steel in the construction. The front part is created in the form of a blind metal cover that goes into the top panel, this is one common detail. An interesting feature of the chassis is the lack of a front ventilation duct. Air exchange is carried out only at the expense of ventilation ducts, which are located below, above and behind. The Vinga CS311 computer case has a standard ventilation system, which is represented by one 120 mm bladed impeller. The pre-installed cooler is located at the back. The position of the standard impeller can be adjusted, which makes it p...ossible to adjust the cooling to the features of a particular assembly. Additionally, on the top cover there are two more seats for 120 mm fans. The working space of the case is divided into two parts. Below, under the protective cover, there is a place for mounting a power supply unit and a HDD rack. The hard drive cage can be moved, which will allow you to adjust the free space for installing the PSU. |
 |
First of all, this model attracts attention with its external design — this is a rather stylish box, which was created in a compact Mini Tower form factor. The model weighs 3.9 kg, which is due to the use of good 0.7 mm thick steel in the construction. The front part is created in the form of a blind metal cover that goes into the top panel, this is one common detail. An interesting feature of the chassis is the lack of a front ventilation duct.
Air exchange is carried out only at the expense of ventilation ducts, which are located below, above and behind. The Vinga CS311 computer case has a standard ventilation system, which is represented by one 120 mm bladed impeller. The pre-installed cooler is located at the back. The position of the standard impeller can be adjusted, which makes it possible to adjust the cooling to the features of a particular assembly. Additionally, on the top cover there are two more seats for 120 mm fans. The working space of the case is divided into two parts. Below, under the protective cover, there is a place for mounting a power supply unit and a HDD rack. The hard drive cage can be moved, which will allow you to adjust the free space for installing the PSU.
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Always clarify the specifications and configuration of the product with the online store manager before purchasing.
Catalog Vinga 2025 - new arrivals, bestsellers, and the most relevant models Vinga.
Garniy small body. A lot of space for darts on the rear panel. Zhakhliva akіst, zero blowing. |
The housing is sucile for quiet, whoever thinks about dropsy 240 mm - don’t get in here (like slats like for hyperives and so on) color, pikalka post included all |
If you have arrived before me, I will be at the capture (due to lack of knowledge).
A small elegant body, with a majestic slope. In principle, all pluses.
The first problem was with overheating, because the turntable in the kit was alone in sight in the back. The purchase of 2 more fans for the upper part did not correct the situation. Turntables cannot be placed on the front panel, because it is closed. The system is cold in me (1660 super and 10100f). temperatures reached 80C
Through the river, the button of uvimknennya began to fall into the middle of the case. The same rose-colored headphones on the front panel.