2E GAMING RUNA G2107 without PSU (2E-G2107)
Photos 10 |
This system unit, although it is positioned in an affordable price segment, but at the same time has a good capacity. The Midi Tower platform will fit absolutely everything you need to create a performant PC. Any motherboard format is suitable for this model: microATX, Mini-ITX or ATX. Case 2E GAMING RUNA G2107 received an interesting design performance. The front panel has a beautiful insert with RGB backlight.
The viewing sidewall is made of thick and durable tempered glass, the thickness of the glass panel reaches 5 mm. This model is low-cost, as evidenced by the lack of standard fans. But seats for 120mm impellers are plentiful. At its discretion, the user can put three fans at the front, two at the top and one at the back. Additionally, there are mounts for radiators of the water cooling system. To make your computer more powerful and performant than ever, the platform has space for a 165mm high CPU cooler. For the graphics subsystem of the accelerator, you can use an adapter up to 325 mm long.
|
|
Before buying always check characteristics and configuration of product with online store manager
Catalog 2E 2024 - new products, best sales and most actual models 2E.
Buy 2E GAMING RUNA G2107 without PSU
All prices 7 →Корпус 2E RUNA (2E-G2107) 2E-G2107 | 1 479 ₴ | ||||
Корпус 2E RUNA (2E-G2107) 2E-G2107 | 1 479 ₴ | ||||
2E Корпус для ПК 2E Runa G2107 Black | 1 599 ₴ | ||||
Корпус 2E RUNA (2E-G2107) | 1 690 ₴ | ||||
Корпус 2E RUNA (2E-G2107) | 1 669 ₴ | ||||
Корпус 2E RUNA (2E-G2107) | 1 828 ₴ | ||||
Корпус 2E Gaming RUNA (2E-G2107) | 1 389 ₴ |
Price. (Bought at a discount for 700 UAH) Glass. The bottom location of the PSU. Number of places for fans, and dust filters. Front Panel. And splits. In terms of internal layout. metal thickness. But worthy for your money. Lack of complete fans. (Could put at least a couple of the cheapest ones at 1200 rpm, it would be better) Oleg: use 2E GAMING RUNA G2107 few months |
First, the implementation of outputs. When the top fan is installed there, then all the wires rest against it. And you have to bend very hard.
Secondly. Air intake. For not very hot systems will do. But the front air intakes could have been implemented differently. Because there is very little space for air intake. And even with two blowing fans, the flow is very weak. (Fans NZXT 1400rpm each).
The third problem is the place for 2.5 SSD inside the case. If it is still realistic to install it in the lower place, then it is no longer possible to install it in the upper place (as if possible, but collectively). You only need a straight power cable, the angled ones do not fit in there, and the disk protrudes strongly, the same with the SATA cable. It seems that there is a place for the cable outlet, but if other cables are brought out from the front panel, then this is already problematic to do (to the rear panel for cable management).
Well, a place under 3.5 could literally move it 1 cm inside the case, and you wouldn’t have to bend the SATA and power cables much.
Summarizing the above, I can only say that for the money the case is excellent. And it fully justifies its price (if you do not take into account the lack of fans). Glass, filters, lots of space for fans. Backlight. If the system is not hyper hot, you can safely take and buy. I am generally satisfied with the purchase. And I can advise you to buy.