Craft CED 900
 | Outdated Product 750 ₴ Product type: drill driver; Design: gun; Power consumption (W): 900; Rotation speed (rpm): 750; Torque: Max. torque (Nm): 25; with adjustment; Reducer: 1-speed; Number of speeds: 1; Reverse: slider; Weight (kg): 1.4; Chuck: keyless; Chuck diameter (mm): 10; power button lock; Power source: mains (230 V) |
 |
Close
We recommend products in stockDrills & Screwdrivers Craft →
drill driver, gun, 400 W, 800 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 700 W, 750 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 900 W, 750 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 650 W, 300/1100 rpm, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 1100 W, 750 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 450 W, 850 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 350 W, 750 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 800 W, 750 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 810 W, 750 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 1050 W, 800 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 720 W, 750 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 800 W, 750 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 1210 W, 750 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 450 W, 750 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
drill driver, gun, 400 W, 750 rpm, 1 speed, cartridge: keyless, Ø 10 mm, reverse, power supply: mains (230 V)
Craft CED 900 | ||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||
Drill chuck: types and differencesSpecifics of different types of chucks for drilling and working with fasteners
Which is better: drill, screwdriver or drill-driver?We study the design features and specifics of the use of such similar, but still different types of power tools
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Craft 2024 - new products, best sales and most actual models Craft.
Before buying always check characteristics and configuration of product with online store manager
Catalog Craft 2024 - new products, best sales and most actual models Craft.
AccessoriesAll accessories for Craft CED 900 →
0 0 3 1 |
Definitely a good "Shurik". I've been using it for almost 3 years. An irreplaceable thing in the household. Quite sufficient power - a 3.5x60 self-tapping screw; if you don’t stop in time, the head goes into the board to a depth of 10 mm. Someone wrote that it is necessary to immediately change the cord - I have an excellent one and the length is about 2 m. With “fanatical” use, the permissible heating is, in principle, the same as that of any other, even more expensive one. use Craft CED 900 more than year |
Replacing the numbered symbols, as in other models, on the coupling, the torque of the images is graphically recessed with self-tapping screws, which is not very handy - the number is easier to remember, as shown in the illustration. The smell is very pungent, it doesn’t go away within an hour, I need to remove the insulating material from the apartment. There is a little bit of play in the cartridge, but it’s not critical. If at home you need to tighten/adjust the hour after hour, then go. For a tired postal vikoristan - no. The price is really for such a low amount, it is important to know more about the products on the market. The quality of collection is at a good level. The real power of the engine is no more than 300 W, as in my case. The wind gets warm during normal operation. Strong stinking smell.  Артем А.: use Craft CED 900 few months |
I was renovating a summer house and had to do a lot of woodworking. After the first three dozen screws, it became clear that this process was not only long, but also not as physically easy as it might seem. Since only about 120-140 pieces of 4x60 self-tapping screws needed to be tightened, and more labor-intensive tasks loomed in the future, the idea of buying a screwdriver was sound and timely. The choice turned out to be more difficult than I imagined. Cordless models were no longer needed, since repairs are temporary, and any batteries degrade after three or four years, regardless of whether I used them or not, and to work with the tool I would have to pay a lot of money for new ones. I settled on this fairly inexpensive model and have never regretted it. Despite its small size, it provides decent torque. Drives self-tapping screws. Small diameters and lengths (D up to 5, L up to 60 mm) can be easily driven in without pre-drilling. But already 5x90 goes into solid wood with great difficulty. In principle, this is not a problem, because he also drills quite vigorously and the preparation proceeds quite quickly. Quick-release chuck, maximum diameter As a result, using this tool we managed to save a lot of time and even more effort and nerves. Reverse works great. A speed of 750 rpm is sufficient for both screwing fasteners and drilling. The price is excellent these days, it’s good that there are such inexpensive brands. A wired connection is still not very convenient. Once I got caught over a wire and almost fell from the second floor. But in my case, buying a battery model would be a waste of money. During constant operation it gets quite warm. |
3 out of 4 user review(s) shown
1 more user review(s)
Video reviews
