Intertool DT-4325
Outdated Product 6 699 ₴ Type: semi-automatic inverter; MMA; MIG/MAG; Welding current: DC; Input voltage: 230 V; Power consumption (kW): 7.1; Open circuit voltage (V): 50; Max. welding current (A): 250; Max. electrode size (mm): 5; Minimum wire diameter (mm): 0.6; Max. wire diameter (mm): 1.2; Protection class (IP): 21 |
Intertool DT-4325 | |||||||||||||||||||||||||||||||||||||||||
|
Before buying always check characteristics and configuration of product with online store manager
Catalog Intertool 2024 - new products, best sales and most actual models Intertool.
Intertool is one of the most famous players in the arena of Ukrainian power tools. Under the wing of the brand, all kinds of “tools” for construction and repair, as well as welding machines, are produced. A bright representative of the squad of "welders" is the combined model DT-4235.
Combo
The unit is used for welding with electrodes in manual mode and semi-automatic welding with wire. The cross section of electrodes in wire form can vary from 0.6 to 1.2 mm, which allows you to perform both delicate work and lay a completely standard welding seam. The MMA/MIG welding mode switch is located on the front panel of the instrument case.
Flexible settings
In the Intertool DT-4325 case, it operates with welding currents from 30 to 250 A. The frequency of switching on the unit when working "at full speed" is 60%. This means that for every 6 min. continuous welding device is supposed to be 4 minutes. recreation. Separate rotary knobs on the control panel of the device are responsible for adjusting the arc force and voltage in MIG mode.
Extended equipment
To enhance the pleasant impression of the model , "buns" in the manner of a digital screen for displaying the value of the welding current and an extended set of delivery of the device are called upon. In addition to standard cables for electrode welding, a cable for welding with wire, a mask and a hammer-brush, the device is equipped with a gas hose and a reducer. It lacks only the functions of hot start and anti-sticking of the electrode, which could be useful for beginners in welding.