Ryobi R18N18G-0 (5133002093)

One of the best hobby class nailers

Ryobi R18N18G-0 works with J size nails (they have a diameter of 1.2 mm, but can be of different lengths: from 15 to 50 mm). This nailer has two modes of operation: slow (for accurate and accurate clogging) and rapid-fire (for performant driving of studs with a frequency of up to 60 beats / min). The principle of operation of the tool is contact (the nose must be pressed to the surface before pressing the trigger). In order not to leave marks and scratches on delicate materials, a protective sole is put on the spout (two such soft pads are included with the tool). The nailer is equipped with a backlight of two bright LEDs. A metal clip designed to be worn on the belt can be attached on either side (under the right or left hand). The impact force and therefore the driving depth can be adjusted.

Up to 2000 nails per charge

This nailer weighs 2.5 kg without battery (2.9 kg with battery). Therefore, it is more or less normal to keep it in a horizontal position, but working somewhere under the ceiling is already difficult. The battery itself, by the way, is not included. Therefore, if you don’t have a Ryobi tool yet, then it’s better to immediately take a nailer complete with a battery and charger — it will turn out cheaper than buying everything separately. If you still want to choose the battery yourself, then keep in mind that with a 4 Ah battery, the tool will be able to hammer about 1600 nails on a single charge, and with a 5 Ah battery, almost 2000 nails.