DisplayPort version
The version of the DisplayPort and/or miniDisplayPort interface used by the graphics card. For the interfaces themselves, see the relevant help items; here we recall that they differ only in the type of plug. So the list of versions for both cases is the same, it looks like this:
— v 1.2. The earliest widely used version (2010). However, already in this version, 3D compatibility and the daisy chain mode appeared. The maximum fully supported resolution when connecting a single monitor is 5K (30 fps), transmission up to 8K is possible with certain restrictions; a frame rate of 60 Hz is supported up to a resolution of 3840x2160, and 120 Hz — up to 2560x1600. And when using daisy chain, you can connect up to 2 2560x1600 screens at 60 frames per second or up to 4 1920x1200 screens at the same time. In addition to the original version 1.2, there is an improved v 1.2a, the main innovation of which was support for AMD FreeSync, a technology used in AMD video cards to synchronize the refresh rate of the monitor with the actual frame rate output by the video adapter.
— v 1.3. An update introduced in 2014. The increased bandwidth made it possible to provide full, without restrictions, support for 8K at 30 fps, as well as transmit 4K images at 120 fps, sufficient for 3D work. Resolutions in daisy chain mode have also increased — up to 4K (3840x2160) at 60 fps for two screens and 2560x1600 at the same frame rate for four. Of the specific innovations, it is worth me...ntioning the Dual Mode mode, which allows you to connect HDMI and DVI devices to such a connector through the simplest passive adapters.
— v 1.4.Version introduced in March 2016. Formally, the bandwidth has not increased compared to the previous version, but thanks to signal optimization, it became possible to work with 4K and 5K resolutions at 240 fps and with 8K at 120 fps. However for this, the connected screen must support DSC encoding technology — otherwise, the available resolutions will not differ from version 1.3. In addition, v 1.4 added support for a number of special features, including HDR10, and the maximum number of simultaneously transmitted audio channels increased to 32.
—v 1.4a. An update released in 2018 "quietly" — without even an official press release. The main innovation was the update of Display Stream Compression technology from version 1.2 to version 1.2a.
Power consumption
Maximum power consumed by the graphics card during operation. This parameter is important for calculating the total power consumed by the entire system and selecting a power supply that provides the appropriate power.
Additional power
Format of additional power required for the operation of the graphics card.
By itself, the PCI-E connector, which is standardly used to connect video cards, provides 75 watts of power. For many models, even quite performant ones, this is quite enough, and many modern video adapters do
without additional power. However, models
with additional power have become more widespread, especially among high-end solutions.
The simplest version of such a power supply is one
6-pin or
8-pin connector. A 6-pin connector can additionally provide up to 75 watts, an 8-pin connector can provide up to 150 watts. However, for high-end solutions, one connector is not enough, so there are models with
6 + 8 pin,
8 + 8 pin, and even
8 + 8 + 6 pin or
8 + 8 + 8 pin formats.And the new cards are completely
16-pin. Such power connectors have a total of 16 lines: 12 for current supply and 4 signal. The effective power threshold of the 16 pin connector is up to 600 watts. Connection to it can be done through a 3×8 pin adapter.
Note that it is theoretically possible to connect a 6-pin power supply to an 8-pin connector and vice versa, even corres
...ponding adapters are available for this. However, in fact, the possibility of such a connection should be clarified separately, and such tricks should be used only in extreme cases, when other options are not available.Number of slots
The number of slots occupied by the graphics card on the back of the system unit.
This indicator allows you to estimate the amount of space required to install a video adapter. It is relevant in the light of the fact that modern video cards can have a fairly extensive set of connectors, and for this set there has long been little standard lanyard for 1 slot. This is especially true for powerful performant models. Thus, many solutions, especially mid-range and top-end ones, occupy
two or even
three slots at once.
Separately, it is worth touching on models for which the characteristics indicate a fractional number of slots — usually 2.5 or 2.7. This detail is provided by the manufacturer for promotional purposes — as confirmation that the graphics card is smaller than a full-fledged 3-slot solution. However, in fact there is no difference between these options: adapters for 2.5 or 2.7 slots still block the third slot (albeit partially), making it unusable.
Length
The total length of the graphics card.
In this case, the length means the size of the device from the plate with connectors (which is attached to the back wall of the system unit) to the opposite side. The plate itself and the outwardly protruding connectors are usually not taken into account.
Data on the length of the graphics card is needed primarily in order to assess whether there is enough space for it in a particular case. In addition, longer boards, usually, have more advanced characteristics (although there is no hard dependence here, and video adapters of similar class may have different lengths). As for specific values, the most compact solutions nowadays have a size of
150 – 200 mm or
less ; an indicator of
200 – 250 mm can still be considered relatively small,
250 – 290 mm — medium, and many models (mostly advanced) have a length
of more than 290 mm.
