Comparison Wanbo T2R Max vs Wanbo T2 Max

The number of individual colour shades that the projector is capable of displaying.

The minimum indicator for modern projection technology is actually 16 million colours (more precisely, 16.7 million is a standard number associated with the features of digital image processing). In the most advanced models, this value can exceed 1 billion. However, two nuances should be taken into account here: firstly, the human eye is able to recognize only about 10 million colour shades, and secondly, not a single modern image output device (projectors, monitors, etc.) cannot cover the entire spectrum of colours visible to the human eye. Therefore, impressive colour performance is more of a marketing ploy than a real indicator of image quality, and in fact it makes sense to pay attention to other characteristics — primarily brightness and contrast (see above), as well as specific data like a colour gamut chart.

The closest distance to the screen that the projector can be used on. Typically, this is the minimum distance at which the image from the projector remains in focus.

This parameter is especially important if the device is to be placed at a small distance from the screen (for example, in a cramped room). Some modern projectors are able to work normally at a distance of 10 – 20 cm. Also note that the throw distances are determined primarily by the lens, and if the initial range of these distances does not suit you, perhaps the situation can be solved by replacing the optics.

The farthest distance from the screen that the projector can be used on. This is the maximum distance at which the image remains in focus and maintains acceptable brightness — at least enough for viewing in a darkened room on a high-quality screen.

It is necessary to choose according to this parameter taking into account the expected operating conditions and the distances to be dealt with. At the same time, it's ok to have a certain margin for the maximum distance — since, as already mentioned, it is usually indicated for an perfect screen and a darkened room, and such conditions are not always available. Also note that although the throw distances depend on the lens, not every projector with an interchangeable lens allows the installation of more "long-range" optics than the standard one — the device may simply not have enough brightness for an increased distance.

Diagonal size of the image projected by the projector. Usually, it is indicated as a range — from the smallest, at the minimum throw distance, to the largest, at the maximum. About throw distances, see above; here it is worth saying that the choice of diagonal size depends both on the distance between the screen and the audience, and on the format of the projector. For example, to watch a video, the best option is the situation when the distance from the viewer to the image corresponds to 3-4 diagonals, and a relatively large picture can be useful for working with presentations. More detailed recommendations for different situations can be found in special sources; here we only recall that the image must fit on the screen used with the projector.

Automatic image alignment when the projector is moved away from the screen. If the central axis of the projection ray does not coincide with the central axis of the screen, then an effect in the form of a so-called keystone occurs. The projector uses a special software algorithm to emulate screen and projection ray alignment. This is not effect the quality of colour reproduction or the depth of textures, but the image can be aligned. The auto keystone correction feature works on the basis of a proximity sensor, which evaluates the difference between the sizes of the edges of the picture. If a keystone effect occurs, the projector straightens the picture without user participation.

Bluetooth version supported by the projector.

By itself, Bluetooth technology is designed for direct wireless connection between different devices. In projectors, this connection is most often used to broadcast sound to wireless headphones or speakers; Other uses of Bluetooth are possible (for example, connecting a remote control), but they are rare. Thus, you can not pay much attention to the specific version of Bluetooth supported by the projector — all versions are compatible with each other at least in basic functionality (including sound transmission).

Wi-Fi standard supported by the projector.

Wi-Fi is known mainly as a method of wirelessly connecting to the Internet and local networks. In addition, more recently, this technology has also been used for direct connections between wireless devices. Accordingly, the methods of using Wi-Fi in projectors may also be different. Thus, some models are capable of connecting to local networks to work with content via DLNA (see above); in others, such a connection is used for control from a computer or other network device; in others, a “remote control” like a smartphone or tablet can connect directly via Wi-Fi.

As for Wi-Fi versions, the most popular options in modern technology - Wi-Fi 4 (802.11n) and Wi-Fi 5 (802.11ac) - are quite compatible with each other, and the difference between them in this case is not critical. Therefore, you don’t need to pay much attention to these details when choosing.

There are also Wi-Fi ready projectors, which do not have Wi-Fi out of the box, but when connecting the appropriate adapter (purchased separately) are capable of a wireless connection.

Miracast technology is designed to transmit streaming video over an IEEE 802.11n wireless channel. This technology is well suited for broadcasting "heavy" high-quality content. Thanks to Miracast, you can display video from a smartphone or a picture of a tablet / laptop screen on the projector in a matter of seconds. Miracast can be considered an optional Wi-Fi Direct application.

The processor performs the function of converting the input signal; the overall image quality largely depends on its type. The more powerful CPU is used in the projector, the greater the depth of textures the picture will have. Of course, powerful high-performance processors are found mainly in advanced projectors. Inexpensive models of projectors receive a standard CPU with basic capabilities.