Comparison 2E Gaming HyperDrive Pro WL vs Hator Quasar Wireless

The type of connection used by the mouse.

All types of mouse connection can be divided into wired and wireless. There are also combined models that allow both methods; however, for a number of reasons, they have not received much distribution.

Wired mice can vary in connector type; however, the universal standard nowadays is USB, other options are much less common (see "Cable" for them). Anyway, such mice are much cheaper than wireless counterparts, moreover, they do not require batteries / accumulators and have an almost unlimited lifespan. On the other hand, the wire restricts mobility and can be inconvenient when connecting, especially if the computer is located far away or in a hard-to-reach place.

Wireless devices, in turn, can connect via radio, Bluetooth, or Wi-Fi ; in some models, two options are combined — at the user's choice, (usually radio and Bluetooth). Regardless of the interface used, all such models are more convenient than wired ones due, in fact, to the absence of a cable; and their range is at least a few metres, so a wireless mouse can also work as a kind of remote control. At the same time, a wireless connection is more expensive than a wired connection, and besides, it requires autonomous power supply — as...a result, the period of continuous operation of the mouse is limited.

As for the different types of wireless connection, here are their features:

— Radio. To connect over the air, usually, a wireless adapter is used, which is connected to the USB port of the computer. This method is convenient in that it can be used with any computer, including systems that do not have built-in Bluetooth or Wi-Fi modules. The disadvantages of this option include the fact that the adapter requires a free connector; as a result, with a small number of USB ports, difficulties can arise. However, this moment, if necessary, can be easily corrected by connecting a USB hub; so it is this connection method that is most popular among modern wireless mice.

— Bluetooth. The main advantage of this connection method is that many modern devices — laptops, most monoblock computers, smart TVs, etc. — have built-in Bluetooth modules. Thus, you can connect the mouse to such equipment directly, without occupying hardware connectors. And for PCs not equipped with internal Bluetooth modules, appropriate adapters are available (which may even be included with the mouse). In addition, some advanced models with such a connection are able to remember several Bluetooth devices at the same time and switch between them literally “with the touch of a button”. The Bluetooth communication range is at least 10 m with line of sight.

— Wi-Fi. A rather specific option, which is extremely rare — in certain models of laptop mice (see "In the direction"). In many respects it is similar to Bluetooth — in particular, it is designed mainly to work with built-in modules and allows you to use a mouse without occupying hardware connectors. At the same time, the range of communication via Wi-Fi is much greater. On the other hand, this advantage is not of fundamental importance, and on the technical side, the creation of Wi-Fi mice is associated with certain difficulties. That is why this type of connection has not received distribution.

Mouse support for Multi-Device technology.

This technology is found exclusively in models with wireless connectivity (see “Connection type”). It allows you to pair the mouse with several devices simultaneously and quickly switch between them without fiddling with the settings every time; in many models, such switching is carried out literally at the touch of a button. Thanks to this, you can, for example, easily use the mouse with both your home computer and a TV running Android TV, connecting to one or another device as needed.

Note that it would not hurt to clarify the specific features of the Multi-device separately. First of all, this concerns the number of simultaneously supported devices.

Resolution of the sensor responsible for tracking mouse movements on the work surface. Specified in DPI — dots per inch.

The physical meaning of DPI as a whole is as follows. The sensor of a modern mouse works on the same principle as the camera matrix, and consists of pixels. And DPI is the number of pixels that fall on 1 inch of the underlying surface (length or width), "visible" by the sensor.

It is believed that more DPI means a more advanced sensor and mouse in general; nowadays, models for 3500 – 5000 DPI, 12000 DPI, 16000 DPI even more are not uncommon. In a way, it is — high resolution contributes to accuracy. However, the only thing that is directly determined by this indicator is the speed at which the cursor moves across the screen: the higher the resolution of the sensor, the greater the number of pixels that the cursor will move when the mouse itself moves a certain distance. At the same time, it is worth recalling that too high a speed is even more undesirable than too low. So the real need for high DPI ( 1000 and above) arises mainly when working on large screens (4K resolution and more); for more modest displays (HD and Full HD), smaller values are often enough.

The ips (inches per second) parameter is the linear speed of mouse movement, expressed in inches per second, at which the manipulator's sensor is able to read the surface. In top models, the maximum mouse movement speed often reaches 400-600 ips, but devices with ips in the region of 200 are more common.

The polling rate shows how often the mouse sensor exchanges data with the computer about cursor movement. This parameter is measured in hertz (Hz), with one second being taken as the unit of time for its assessment. The smoothness and speed of cursor movement directly depend on the polling rate of the sensor. Directly connected to it is the mouse response time — this is the time interval required for the signal about the manipulator's movement to reach the display of the cursor position change on the screen. Response time is measured in milliseconds (ms). The higher the mouse's "hertz rate," the lesser the response time it demonstrates. The most common value can be considered 1000 Hz with a response time of 1 millisecond. For competitive games, attention should be paid to faster mice, including 2000 Hz, 4000 Hz, and 8000 Hz. Values below might negatively manifest just in gaming scenarios.

The number of buttons provided in the design of the mouse. However, the term "buttons" can also refer to specific hardware solutions — for example, a solid touch area used in many Apple mice counts as two buttons, because. it is divided into two working areas. But the clickable wheels, as well as the power button, are not taken into account in this calculation.

The minimum number of buttons for modern mice and other similar manipulators is two : this is the number that is necessary for comfortable work in most modern operating systems. If there are more than two keys, this means that there are additional buttons responsible for specific actions. So, even relatively inexpensive devices can be equipped with 3 – 4 buttons ; in addition to the 2 main buttons, they can have, for example, 2 side thumb keys, or 1 double/triple click button (see below). Solutions for 5 – 6 buttons are extremely popular nowadays; among them are many gaming mice, where the mentioned thumb buttons are supplemented with a double / triple click, a sniper button and/or a DPI switch (see also below about these functions). And in the most multifunctional models, 7 – 8 buttons and even more can be installed. In some cases, this number exceeds a dozen and a half; such mice are usually gaming devices designed for RPGs...and other similar genres where it is important to have a wide range of actions at your fingertips.

The presence in the mouse of its own built-in memory.

The main and, in fact, the only way to use such memory is to store various advanced settings (for example, the functions of programmable keys, or even entire user profiles for various games or other tasks). This feature is relevant mainly for gamers, so almost all models with this feature are gaming.

The presence of illumination in the design of the mouse.

This illumination can be provided by the same LED that illuminates the surface below the sensor, or by separate light sources. It can have a different colour, and the most advanced systems — RGB backlighting — allow you to adjust the shade to your liking. Anyway, the backlight gives the mouse an unusual and stylish appearance, besides, it can also have special effects (see below). However, this function has not only an aesthetic, but also quite a practical meaning: for example, a colour change can be used as a DPI level indicator (see above) or as a low battery signal. On the other hand, the backlight affects the cost of the device, and the real need for it is not so often — moreover, in many cases (for example, in the office) an extra “illumination” is completely useless. Therefore, most modern mice still do not have a backlight.

The mouse has additional lighting effects. For more information about the backlight itself, see above, and its effects can be different — ranging from a smooth change in brightness and/or colour to colour and light signals, as well as backlight synchronization(for models with synchronization, this paragraph indicates the supported synchronization technology).

The last function is worth dwelling on separately. Synchronization itself allows you to "match" the mouse backlight with the backlight of other system components — the case, graphics card, keyboard, monitor, etc. Thanks to this matching, you can create various unusual effects: synchronous colour and brightness changes, "colour waves", "running lights" etc. However, for such work, all components of the system must support the same synchronization technology — and such a technology, usually, each manufacturer has its own. So before buying it's ok to check compatibility. However, some mice are able to work with several options at once — for example, iCUE from Corsair and MLS (Mystic Light Sync) from MSI.