Comparison ProXima Senator vs ProXima Maximus

The maximum weight of the user for which the simulator is designed, in other words, the maximum weight of the athlete, at which the orbit track is guaranteed to work out the amount of time stated in the characteristics without the risk of breakage. This parameter should be adhered to as accurately as possible, do not be mistaken about the fact that 3-5 kg in excess of the calculated weight will not affect the device. Yes, most likely, the simulator will be able to work for some time, but it will experience loads exceeding the calculated ones, and at best it will fail earlier than expected, and at worst it may break at the most unfortunate moment, which is fraught with injuries. In addition, this case is usually not covered by the manufacturer's warranty, and you will have to eliminate the consequences at your own expense.

The number of fixed load levels (platform resistance during movement) provided for in the design of the orbitrek. The more such levels provided in the design, the wider the possibilities for adjusting the load and the more accurately it can be adjusted to the requirements of a particular user. At the same time, the abundance of adjustments accordingly affects the price.

The maximum horizontal distance between the platforms of the orbit track, which determines, respectively, the length of the athlete's step when working on the simulator. It is believed that for people of average height, a step length of 400 – 500 mm is optimal, and many simulators are made with this calculation. At the same time, there are models with a variable stride length, which allows you to adjust it to the personal preferences of different users.

Anyway, the step length should be chosen depending on height, physique and personal preferences. Too small a step will lead to the fact that you have to mince, and the imitation of walking will turn into marking time, and too wide will lead to inconvenience and an unjustified increase in load without increasing efficiency. Ideally, it is advisable to test the simulator before buying — how comfortable you will be on it. This applies to both fixed and adjustable stride length.

The number of training programs provided for in the design of the orbitrek. Different programs have different purposes — strengthening the cardiovascular system, maintaining physical fitness, burning fat, etc. At the same time, the operation of the programme relieves you of the need to manually set the parameters — this is done by the simulator. Accordingly, the more training programs the orbitrek has, the wider its capabilities and the more convenient the training. And some models may even provide the possibility of self-creation of programs.

Information that the machine can display during operation.

— Training time. The display of training time can include both a total time counter and specialized functions — for example, the time spent in the “target zone” (working at a certain heart rate that is optimal for a particular mode), the total training time per day / week / month, etc. .P. Specific features differ from model to model.

— distance. Display of the "distance traveled" — the distance conditionally covered by the user during the workout. By default, this feature displays the distance traveled since the machine was turned on, but some models may have more advanced features, such as summing up distances over a certain period of time.

— Speed. Displaying the conditional speed of the user's movement (that is, the speed of movement on the ground, which would give the same load as the movement on the orbit track at the current moment). Usually a function is provided to display the current speed, however, some models can also calculate the average speed for passing the distance.

— Revolutions per minute. The display of the simulator displays information about the speed of movement of the pedals (revolutions per minute, rpm). This information will be extremely useful if the user conducts workouts in accordance with the planne...d programs. The cadence data allows you to maintain the optimal pace of your workout, giving you a benchmark to compare your current speed with the reference speed required by your workout programme. Depending on the model of the orbit track, the simulator can only display the speed in real time or show the dynamics of changes in rpm throughout the entire workout. Advanced models allow you to save data on the dynamics of the speed of movement of the pedals, which opens up the possibility of a comparative analysis of the effectiveness and efficiency of training.

— Measurement of the pulse. The ability to measure the user's heart rate during training. This parameter is one of the most important, for different training goals (burning fat, maintaining tone, strengthening the cardiovascular system), the optimal heart rate will be different. It also depends on a number of other parameters: gender, age, physique, physiological characteristics, etc. And exceeding the maximum allowable heart rate is fraught with unpleasant health consequences. You can learn more about this in the specialized literature, and best of all, consult a trainer or doctor. To measure the pulse, special sensors are used, in different models of orbitreks they can have a different design: a clip on the ear, a chest block with a belt, sensitive plates on the handles of the simulator, etc.

— Recovery test. The presence of a recovery test function in the orbitrek (also called a "fitness test" or "fitness assessment"). This function allows you to determine the rate of recovery of the body after physical exertion and, accordingly, its general physical condition and fitness for such loads. Usually, for this, the pulse is measured twice — immediately after training and 1 minute later — after which the simulator gives an estimate, which is deciphered using special tables. Recovery test machines, by definition, have heart rate measurement capability (see above).

— Calorie consumption. Displays the amount of energy expended by the user during the workout. This allows you to evaluate the effectiveness of the work to a certain extent, especially if it is aimed at burning fat and you need to track energy costs. Note that in most models, the estimation of calorie consumption is done quite approximately, without taking into account the individual characteristics of the body, however, for amateur training, this accuracy is quite enough.

— Generated power. The display shows how much electricity, in Watts (W), was generated during the workout. The power generated is directly related to the pedaling speed and the selected load. This parameter is especially relevant for orbitreks with a built-in generator. Simulators of this type operate in a completely autonomous mode — to power the on-board electronics in the orbit track, a battery is provided, which is regularly recharged from the generator. But the calculation of the generated power can also be carried out in traditional network / battery orbitrecks. Experienced users use the power generated data to gauge the overall level of effectiveness/efficiency of a workout. The generated power gives an overall estimate of the pedaling speed, the level of the selected load and the training time. Upon reaching a certain value of generated power, experienced users often end their workout.

— Workout chart. On the screen of the orbit track, a schedule of the training programme is displayed, on which the level of load and the duration of the training are fixed in a convenient form. The chart allows you to visually assess the amount of energy expended, and at the same time the calories burned, at various stages of the lesson. Additionally, this allows you to take control of the load rate. A decreasing or increasing schedule will tell you when it is desirable to increase the load, and when to reduce it, in order to evenly distribute forces throughout the entire training programme. Some models allow you to save the results of training in a graphical form and compare the diagrams of past sessions with each other.

— Fat analyzer. The presence in the orbit track of the function of measuring the amount of adipose tissue in the body (in percent). The operation of such a metre is based on the use of a weak electric current passed through the human body: different types of human tissues have different resistance, and the amount of adipose tissue can be deduced from the characteristics of the discharge. This technology is not accurate, but to a certain extent it allows you to evaluate the features of the physique; and by measuring the fat content before and after a course of training, you can get a pretty clear result. The measuring current is considered harmless for healthy people, however, we note that there are a number of limitations here: in particular, the fat analyzer cannot be used by pregnant women, children under 10 years old, and people with electronic pacemakers installed. And anyway, before buying a simulator with this function, it is advisable to consult a doctor.

— Body mass index (BMI). The automatic calculation of the body mass index allows you to adjust the training modes for each individual user, as well as more objectively evaluate the result of training programs. Body mass index (BMI) is the ratio of a person's height to their weight. Calculated using the following formula: weight / height / height. Let's assume that the user weighs 70 kg and is 1.76 m tall. In this case, BMI = 70/1.76/1.76 = 22.6. The normal MBI is considered to be an index from 19 to 24. If the user's MBI is insufficient (less than 19), then the simulator will develop workouts based on gaining body density and increasing muscle mass. When the MBI is excessive (over 24), the machine will recommend using a training programme to reduce fat mass.

— Assessment of basal metabolism (BMR). Ability to calculate basal metabolism — the minimum amount of energy required by the body for normal functioning (for the respiratory, circulatory, nervous systems, as well as various organs). In other words, basal metabolism is the amount of energy that the body spends directly on functioning, without putting it off “for later” in the form of adipose tissue. This parameter is extremely important for organizing proper nutrition, especially when exercising to burn fat and reduce excess weight. There are formulas that allow you to determine BMR by weight, height, age and sex of a person; however, they allow you to get only an average result, while the simulator is able to take into account many additional factors that affect the metabolic rate. Usually, basal metabolism is determined by energy costs per day.

— Room temperature. The possibility of measuring and displaying the temperature in the room on the display of the orbit track. This function will help you more accurately assess the conditions for training and choose the appropriate form of clothing, as well as, if necessary, take measures to ensure a comfortable temperature (open the window; turn on the air conditioner — or vice versa, the heater).

The above list is not exhaustive; in modern orbitrecks, other types of information can also be displayed on the display.

The type of food used in the orbit track.

— Network. Powered by a standard 230 V power supply (in other words, a regular home outlet). Such power allows you not to worry about replacing or recharging "dead" batteries — the simulator will work as long as there is light in the house. In addition, it is suitable for simulators with any load system, even electromagnetic (for more details, see "Load System"), while such models are much cheaper than similar generator ones (see below). The main disadvantages in this case are the dependence on the outlet and the need to use a network cable, which can limit mobility and get in the way. However, in most cases, these shortcomings do not cause significant inconvenience.

— Battery. The orbitrek is powered by replaceable accumulators or batteries. The main advantage is the complete battery life of the simulator — it can be installed anywhere without worrying about the presence of sockets and laying the power cord. On the other hand, the battery power is very limited, and they are only suitable for simulators with non-volatile load systems (mechanical or magnetic, see "Load System" for more details), where only the computer needs power. In addition, the battery life is not infinite, and they need to be changed or recharged periodically (and in the case of batteries, only changed).

— Built-in generator....The orbitrek is powered by its own built-in generator, which is driven by the rotation of the flywheel. In other words, when using such a model, the user himself generates the energy required for work. To turn on the generator simulator, it is enough to turn the flywheel several times. This type of food combines the advantages of the two above. On the one hand, it is autonomous, on the other hand, it has sufficient power even to provide energy to electromagnetic load systems (for more details, see "Load System"). Yes, and you won’t have to change anything, unlike batteries, because. the service life of the generator is comparable to the service life of the simulator itself. At the same time, this feature significantly increases the weight, and most importantly, the cost of the orbit track, and therefore is found only in premium-class models.

The dimensions of the equipment in the assembled and ready to work state. It is important to note that in fact more space is needed for comfortable and proper operation of the simulator.