Ukraine
Catalog   /   Large Appliances   /   Cleaning Machines

Comparison HOBOT R3 vs HOBOT 388 Ultrasonic

Add to comparison
HOBOT R3
HOBOT 388 Ultrasonic
HOBOT R3HOBOT 388 Ultrasonic
Compare prices 13Compare prices 21
TOP sellers
Detergent spray system. Smartphone control.
Drop protection for 20 minutes when unplugged.
Typewindow robotwindow robot
Power supplymainsmains
Controlsremote control / smartphoneremote control / smartphone
Motor power90 W90 W
Detergent tank0.3 L
Battery
Battery typeLi-Ion
Autonomy time20 min20 min
More specs
Noise level74 dB65 dB
Power cord length5 m
Dimensions29.5x14.8x9.5 cm29.5x14.8x9.5 cm
Weight0.95 kg0.92 kg
Added to E-Catalogoctober 2023august 2020
Glossary

Detergent tank

Объем бака для моющего раствора, установленного в уборочной машине.

Данный параметр напрямую связан с типом устройства (см. выше) и некоторыми особенностями его функционала. Так, в мощных самоходных поломоечных машинах (см. «Тип») могут предусматриваться баки объемом в десятки литров, тогда как в роботах для мытья пола вместимость не превышает 1 л (а в отдельных моделях составляет всего 120 мл). Так что сравнивать по этой характеристике показателю можно только агрегаты одного типа со схожим функционалом. При таком сравнении стоит исходить из того, что более вместительный бак, с одной стороны, позволяет дольше работать без перезаправки, с другой — сказывается на габаритах и весе.

Battery type

The type of battery used in the car with the appropriate power supply (see above). The type is indicated by the technology used to manufacture the battery.

- Ni-Cd. One of the oldest modern technologies. Such elements are capable of operating at high discharge currents, which is especially important for heavy and powerful equipment with high energy consumption. In addition, they charge fairly quickly, can withstand cold work and temperature changes without any problems, and are relatively inexpensive. One of the main disadvantages of nickel-cadmium batteries is the so-called. memory effect - a decrease in capacity if charging was carried out until completely discharged. However, this disadvantage can be compensated for by using high-quality chargers and following operating rules. But the clear disadvantage of this variety is environmental unsafety in production and disposal; It is precisely this that limits the use of Ni-Cd batteries in modern technology.

- Ni-Mh. A technology created in an attempt to improve the performance of the nickel-cadmium batteries described above. The attempt was quite successful: while maintaining the main advantages of their predecessors, nickel-metal hydride elements are at the same time less susceptible to the memory effect and more environmentally friendly. Their disadvantages include slightly increased cost and specific rules for long-term storage.

— Li-Ion. Lithium-ion batteries are notable primarily for their hig...h charge density - in other words, they have high capacity with small dimensions and weight. This is especially important for compact devices such as robots or manual window cleaners (see “Type”). In addition, such batteries are practically not subject to the “memory effect”. Among the disadvantages of this technology, in addition to cost, it is worth mentioning sensitivity to high and low temperatures, as well as the likelihood of “accidents” in abnormal conditions: failure of the built-in controller with overcharge or overdischarge, overheating or short circuit can lead to swelling, electrolyte leakage and even fire.

- Li-Po. A type of lithium-ion battery (see above), in which a polymer (gel) electrolyte is used instead of a liquid electrolyte. This design provides additional advantages over the original Li-Ion technology: lithium-polymer batteries have an even greater charge density, and the likelihood of “accidents” with explosions and fires in them is noticeably reduced. The main disadvantages of such power supplies are their rather high cost and the requirement to maintain optimal temperature conditions.

— Gel. In this case, we are usually talking about gel lead-acid batteries, similar to those used in cars. Such batteries are significant in weight, so they are used exclusively in heavy harvesting equipment, where several kilograms of battery weight are unnoticeable against the background of the weight of the machine itself. Among the practical advantages of such batteries, it is worth noting good capacity, durability, the ability to easily withstand deep discharge, as well as resistance to low temperatures and temperature changes.

Noise level

The noise level created by the harvesting machine during operation.

Low noise levels are important for the comfort of both the operator and others; the latter is especially true in some specific places such as hospitals or kindergartens. On the other hand, the higher the power, the louder, as a rule, the unit operates and the more difficult it is to reduce this noise to a certain level; despite the fact that in many cases high volume operation is not a particular problem. So you should specifically look for a “quiet” cleaning machine only if a low noise level is more critical for you than high cost and/or reduced power.

When assessing specific loudness values, it is worth considering that the decibel used to indicate the noise level is a non-linear quantity. Therefore, the easiest way is to evaluate specific values using comparative tables. Here's a simplified table for the range that most modern harvesting machines fit into:

55 dB - background noise in an office without special noise sources;
60 dB - loud conversation;
65 dB - city street with average traffic intensity;
70 dB - a conversation between several people in a raised voice.
75 dB – high power vacuum cleaner.
80 dB - traffic noise on a busy street.

Power cord length

The length of the mains cord provided in the machine with the appropriate power supply (see "Power supply").

A long cord allows you to move further away from the outlet but can get tangled under your feet and create inconvenience. Therefore, manufacturers choose the length of the power cord by the specs of a particular model: for example, a window robot (see "Type") is quite enough 4 – 5 m, and in heavy scrubbing units, the length of the wire can exceed 20 m.

Weight

The total weight of the cleaning machine. Usually, weight is indicated with empty tanks for detergent, waste, fuel, etc. At the same time, additional equipment, such as side brushes, may or may not be taken into account. Such equipment has a very small weight compared to the machines themselves. And, when installed/removed, does not seriously affect the mass of the entire machine.
Price graph
HOBOT R3 often compared
HOBOT 388 Ultrasonic often compared