Dark mode
Укр|Eng|Рус
Ukraine
Catalog   /   Sound & Hi-Fi   /   Musical Instruments   /   Guitars & Equipment   /   Acoustic Guitars

Comparison Bandes AG-851C vs Maxtone WGC4011

Add to comparison
Bandes AG-851C
Maxtone WGC4011
Bandes AG-851CMaxtone WGC4011
Compare prices 23Compare prices 5
TOP sellers
Typeacousticacoustic
Number of strings66
Body
Size4/44/4
Shapedreadnought (western)dreadnought (western)
Cutaway
Pickguard
Top decklindenspruce
Bottom decklindenlinden
Shelllindenlinden
Bridgemaple
Neck
Number of frets2020
Anchorsinglesingle
Neck materialmaplemaple
Fretboardmaplemaple
Color
Added to E-Catalogjune 2019july 2016

Cutaway

Special cutout on the body of the guitar. It is located at the base of the neck, to the right of it, if you look at the upright guitar from the front (in left-handed models — on the left). This feature makes it much easier to play on the upper frets (located near the rosette): without a cutout, the body would prevent reaching them. Therefore, this feature is highly desirable for guitarists who play notes at high frets (from the 12th and above).

There is an opinion that the cutout negatively affects the acoustics of the guitar (reduces the useful volume of the body, reduces the volume and saturation). However, in most cases, this effect is almost imperceptible, especially since manufacturers often use various tricks to compensate for this effect.

Top deck

The material from which the top of the guitar is made is the flat part of the body on which the bridge (see below) and the sound hole are located.

A wide variety of materials are found in modern guitars — from spruce, maple or cedar, which are familiar in our latitudes, to expensive mahogany and “exotics” like bubinga (“African rosewood”) or koa, which grows only in Hawaii. Each material has its own characteristics that affect the sound and other properties of the instrument (for example, appearance and durability). However, the sound of a guitar largely depends on a number of other factors besides the material — the type of instrument, the shape of the body, etc. Therefore, models made of similar materials may well sound noticeably different. In addition, note that expensive woods can be used solely for aesthetic purposes and have no advantages over cheaper materials.

In light of all this, we can say that the data on materials are more of a reference value, and when choosing, it is more likely to focus on more significant characteristics (for example, the same body shape), as well as practical data about the tool (reviews, reviews, audio recordings of the game etc.). Detailed data on materials may be required only by professional musicians, luthier masters, etc.; this information, if desired, can be found in special sources.

Bridge

The material from which the bridge (string holder) of the guitar is made is a device with which the strings are attached to the top deck.

Theoretically, the colour of the sound of an instrument depends on the characteristics of all its details. However, in the case of the bridge, this influence is so insignificant that the data on the material in this case are more of general reference and advertising than of real practical value. The variety of such materials is quite large; among the most common are rosewood, mongoy and ebony.
Price graph
Maxtone WGC4011 often compared