Comparison Zhiyun Crane M2S Combo Kit vs Zhiyun Crane M2

The maximum weight that the steadicam is designed to carry.

In fact, this is the maximum weight of the camera with all accessories allowed for this model.

The range of forward-backward tilt angles relative to the vertical position supported by the steadicam.

It can be written in different ways.

The simplest option is when one angle value is indicated in the characteristics. This may mean that the camera is able to deviate from the neutral position in both directions by the same angle, which is half the range.

Another recording option is used when the angles of inclination forward and backward are not the same. In such cases, the horizontal position of the camera on a vertical steadicam is taken as zero, the “—” sign indicates the maximum angle of camera deflection back, lens up, the “+” sign — forward, lens down.

The range of roll angles (to the side) supported by the steadicam.

Can be recorded in two ways (See "Tilt Range")

— Time lapse. Shooting video in time lapse mode involves a very low frame rate (one frame every few seconds, or even minutes). In the completed video, the effect of fast movement is achieved (for example, the day from sunrise to sunset fits in just a few minutes). However, this is the general principle of time lapse; but the specific ways of its implementation may be different depending on the specific model of the stabiliser.

- Selfie mode. A separate mode for shooting selfies. This function can be implemented in different ways, depending on the purpose of the device. It is aimed at filming himself and the immediate environment of the operator.

- Sports mode. The mode is designed for high-quality shooting of dynamic scenes in motion. In sports mode, the stabiliser automatically compensates for frame deviations from the reference location, while the motor runs at the highest possible speed.

- Panorama. In this shooting mode, the camera attached to the device automatically rotates around its axis, taking a series of shots, from which the panoramic image is then “glued together”. Most often, this function involves the creation of horizontal panoramas. However, camera movement in the vertical plane can also be provided.

— Tracking mode. Automati...c tracking of a certain object by pointing the camera so that the shooting target is constantly in the centre of the image, or at least in the frame. The subject for tracking is set by the stabiliser operator.

— Inversion mode. This mode allows you to turn the device upside down, retaining all its functions and camera position. It will come in handy when shooting from atypical angles (for example, from the ground).

The capacity of the battery used in the Steadicam.

Theoretically, a higher capacity allows you to work longer without recharging, but in fact, the battery life of the steadicam also depends on its power consumption. So, only models with similar performance characteristics can be compared with each other according to this indicator; and when choosing, it is better to focus not on the capacity, but on the directly claimed operating time on a charge.

The maximum time during which the device will work stably. It is worth considering that the manufacturer really indicates the maximum time, which does not correspond to real indicators due to the conditions and intensity of use.

The ability to mechanically lock each axis of the stabiliser using clamps, and latches. Mechanical locking of the axes allows you to better balance the devices for specific tasks and is also useful for transportation.

— Phone mount(like a screen). The ability to use your smartphone as your stabiliser screen. The device's camera is not used in this case: filming is carried out either on the built-in camera of the stabiliser or on the action camera attached to it. Note that the smartphone can be used not only as a viewfinder but also to control the camera; specific features depend on the stabiliser model.

— Focus control mechanism. A device that allows the stabiliser controls to focus the lens on the installed camera. It simplifies the use of manual focus lenses greatly.

— Two-handed handle. The two-handed handle increases agility, stability and precision.

— Quick release plate. This element makes it possible to quickly install and remove the camera from the stabiliser without using third-party tools.

— Tripod. The presence of a small tripod in the stabiliser kit — a tripod, which allows you to use the device in a stationary position, setting it on a flat hard surface. Usually the tripod is detachable.

— Remote control. The presence in the kit of a small remote control. It is convenient when the device is installed at a remote distance, for example, in a car.