Comparison Whirlpool WHC 20T573 P vs Whirlpool WHC20 T593 P

Inverter compressors, though more expensive than linear compressors, are more advanced, efficient, and produce less noise. The main difference between the two is that linear compressors operate at either maximum speed or not at all, causing temperature fluctuations and wear and tear (due to increased currents at starting mode). In contrast, inverter compressors allow for smooth power control, adjusting the speed to maintain set conditions and consuming electricity more efficiently. However, their high cost remains a disadvantage.

Apart from shelves, there are several additional compartments in a refrigerator, including a a freshness zone, a humidity zone, a multi-zone and a shelf for bottles.

— Freshness zone.It is a special compartment in a refrigerator designed for storing fresh products for an extended period. The temperature in this zone is slightly lower than the refrigerating chamber, typically around zero degrees, earning it the nickname "zero chamber". Such conditions help to preserve the freshness of products for up to 3-4 days. However, it's important to note that the temperature in the zero chamber may vary depending on the refrigerator model, ranging from 0 °C to +1...3 °C, which can impact the preservation of stored products.

— Humidity zone. Another specialized compartment, similar to the freshness zone, is designed to preserve the freshness of food items for an extended period. However, this compartment maintains high humidity at the same temperature as the rest of the refrigerator, which prevents the products from drying out. This feature is especially important for refrigerators with No Frost systems, which tend to blow moisture out of the refrigerator, leading to quicker drying of the contents.

— Multi-zone. This compartment in a refrigerator combines several functions of different compartments, such as the...ability to work as a refrigerator or a freezer, along with other specific features like quickly cooling drinks, slow defrosting, and cooling hot dishes. Modern refrigerators offer more extensive capabilities with specific features, making the multi-zone compartment a valuable addition. Some models have the entire freezer performing the function of a multi-zone chamber, but most models have a separate compartment for it. The presence of a multi-zone compartment significantly expands the capabilities of a refrigerator.

— Shelf for bottles. It is a hanging accessory, typically in the form of a lattice, that is installed under a shelf in the refrigerator. It allows bottles to be stored horizontally, which saves space in the refrigerator while keeping them organized.

The lowest temperature provided by a refrigerator freezer.

The lower the freezer temperature indicator, the more advanced the freezer is considered to be, and the better it is suited for long-term food storage with wider capabilities. It's important to note that the standard operating temperature for a fully functional freezer is -18 °C, which is suitable for both storing and freezing pre-frozen foods. Some refrigerators are designed with a temperature indicator of -24 °C, but this is mainly achieved through the quick freezing mode (see "Functions"), and the standard operating temperature is still -18 °C. However, if you plan to freeze food frequently and store it for extended periods, it's better to choose a model with a temperature of -24 °C and consider the freezing power as well.

Less expensive refrigerators have a less advanced freezer with a modest minimum temperature of -12°C or even -6°C, which is only suitable for storing pre-frozen foods, not for freezing fresh food. Although they are much more affordable.

To indicate the temperature of the freezer, markings in the form of asterisks (snowflakes) are often used, each of which means a decrease in temperature by 6 °C. For example, the mentioned -18 °C will correspond to 3 asterisks (***).

Refrigerators with good thermal insulation can maintain low temperatures inside for a significant amount of time even if there is a power outage. This period of time is known as the "keep cold time," during which the refrigerator can preserve perishable food items. A longer keep cold time indicates better thermal insulation, making the refrigerator more suitable for areas where power outages are common.

The freezing capacity of a refrigerator refers to the amount of fresh food it can freeze from room temperature to the freezer temperature within a 24-hour period. For everyday use, a freezing capacity of up to 10 kg/day is sufficient, but if you frequently freeze large volumes of food, you should consider a more powerful freezer.

Refrigerator control panel. To date, there are such options:

— Rotary switches. While a rotary switch technically has the potential to be used for a wide range of functions, in practice, this variety is typically only found in basic models with limited functionality. In such cases, control is often done manually by turning a thermostat knob, with limited options for adjusting temperature, humidity, and other settings.

— Push-buttons. CRefrigerators can have a control panel with classic buttons that offer various functionalities depending on the model. These functionalities can range from basic adjustments (similar to rotary switches) to fine-tuning of temperature and humidity, control of special modes, and more. Compared to rotary switches, push-buttons generally offer a wider range of possibilities.

— Touch. Touch panels are a modern and stylish control option for refrigerators, which requires a light touch to operate. They are considered the most advanced type of control, providing convenient and extensive functionality. Touch panels are typically installed in premium models, where they add to the device's aesthetic appeal with a minimum of unnecessary protruding parts.

The energy class that the refrigerator corresponds to.

Energy consumption classes were originally designated with Latin letters from A (the most efficient) to D (least efficient), but with technological advancements, more advanced classes such as "A+", "A++", etc. were introduced to indicate increasing levels of efficiency. The more pluses a device has, the more economical it is. This was necessary due to the correlation between energy consumption and decreasing efficiency.

For modern built-in refrigerators, the efficiency indicator at the level of class A can be called average, A+ — not bad, A++ — good, A+++ — excellent. Energy consumption rates B and C are rare and mostly found in outdated or cheaper models. Achieving high efficiency requires design innovations, which results in higher device prices. However, these prices can be justified by the resulting reduction in electricity bills. It's worth noting that some built-in refrigerator models are available in different energy consumption classes, allowing customers to choose the best option for their budget and energy efficiency needs.

The energy efficiency of a refrigerator is measured by a parameter classified from A to G, with A being the most efficient. Originally, only up to class A was available until newer, more efficient models were introduced and labeled as A+, A++, and A+++. However, in March 2021, manufacturers reverted to the original labeling system from G to A to avoid creating more pluses. This means that modern models will have the new labeling system, while older ones will maintain their original markings.

The average amount of energy consumed by a refrigerator in a year of operation.

The given parameter is an estimated value and assumes that the refrigerator operates under stable conditions without sudden temperature changes, frequent door openings, and within its designated climate class (see below). Actual energy consumption may deviate slightly from the stated value. Despite this, it is a useful parameter that allows for a rough comparison of different models in terms of energy efficiency.

It should be noted that the energy consumption per year is often a more practical and convenient parameter than the energy consumption class (see above), which is a relative indicator of how efficient a refrigerator is compared to other models of similar size and features. The energy consumption per year, on the other hand, provides an estimate of the actual electricity cost when using a particular refrigerator. For instance, a small two-door refrigerator with an energy class of A can consume less energy per year than a large side-by-side refrigerator with a class of A+++, despite the fact that the latter is formally more energy-efficient than the former in terms of its energy class.