—
Adjustment of the tilt of the rod. Possibility to tilt the rod or the working head relative to the rod. The setting will come in handy for mowing grass in hard-to-reach places. Trimmers with this function are much more convenient to work under swings, benches and garden furniture. Also, by adjusting the tilt of the rod, you can adjust the grip of the trimmer to the height of the user.
—
Telescopic rod. Possibility of increasing the length of the trimmer by extending the rod. Due to design features, this solution is available only for models with a lower engine and helps to maximally adjust the device for a person of any height.
—
Collapsible rod. Possibility to disassemble the trimmer rod into several parts. This feature greatly simplifies storage and transportation: packing, carrying and transporting side-by-side components is easier than a solid long rod. In theory, this design is less reliable than a non-removable design, but trimmers are usually not subjected to such high loads that this would be noticeable.
-
Belt. The strap for carrying the trimmer is
a shoulder or
backpack strap. This design significantly simplifies the operator’s task and reduces operator fatigue: carrying it with a belt is not as tiring as holding
...the tool in your hands. The shoulder strap is supposed to be worn over one shoulder. It helps you control the trimmer better and reduces fatigue, especially during long periods of use. A more complex backpack strap system allows you to distribute the weight of the tool on both shoulders and back. In this implementation, the belt will not slip off the shoulder when wearing the trimmer. Please note that in models without a belt, it may be possible to purchase it separately. However, it is easier (and often cheaper) to immediately buy a tool with this accessory.
— Limit bracket. The bracket acts as a limiter and is designed to protect tall (necessary) vegetation from mowing. Those. you can extend a small structural element at the base of the rod, which, when approaching the bushes, will move them away, thereby not cutting them off. The bracket will also be appropriate when mowing an area with a fence, decorative landscape with many elements that can be damaged during mowing, or can once again “shorten” the fishing line by breaking its ends.
— Rotating head. Possibility of rotating the trimmer working attachment on the rod. Typically this function is used to move the cutting system from a horizontal to a vertical position. Vertical cutting can be useful, for example, for leveling edges and creating borders in lawns.
— Edging roller. The roller is necessary for a neat “haircut” between the lawn and the sidewalk. It is found in models with a rotating head and is designed for more comfortable work. Since the device does not need to be suspended, leaning on the roller makes it much easier to edge flower beds, decorative elements on the lawn, borders, etc.
— Support rollers. Special rollers mounted on the cutting head of the trimmer. Thanks to such rollers, you can rest the head on the ground and roll the tool in front of you - this is more convenient than carrying it “on yourself”. Another advantage is that the rollers support the working attachment at the same height, which means that mowing is as accurate as possible, almost like using a regular lawn mower (with all the advantages of a trimmer). The main disadvantages of models with rollers are the high cost, as well as increased weight, which makes it difficult to work “off the ground.”Additional accessories included with the lawn mower. This point is mainly relevant for robotic mowers (see “Type”), they are most often equipped with the mentioned accessories, such as:
—
Boundary wire. A wire designed to limit the working area of the robotic mower. Such a wire is laid along the perimeter of the work area (taking into account all permanent obstacles such as trees, flower beds, etc.) and is connected to the charging station in a special way. If everything is done correctly, when approaching the border of the site, the mower will change the direction of movement in such a way as not to go beyond the established perimeter - this is more convenient and safer than relying on collision, tilt sensors, etc. Note also that the absence of a wire in included in the kit may mean either the need to purchase it separately, or the fact that the mower, in principle, is not designed to use this function.
-
Remote control. A remote control that allows you to control the robotic mower from a distance. Remote control is especially convenient during operation: the user does not need to chase a moving device, just press the desired button while at a fairly close distance. The operating principle of the remote controls may be different (infrared, radio), but they all have a range of at least several meters.
— Charger (charger). Device for charging batteries used in lawn mow
...ers with appropriate power supply. For models supplied with such a device, the charger model may be further specified in the specifications. This information can be useful not only for finding a spare or replacement charger, but also in case the household has other cordless tools and/or batteries for them. The fact is that many manufacturers nowadays use universal batteries that are compatible with a whole set of tools from the same brand; so, for example, the included charger for a mower may be quite suitable for a cordless saw from the same manufacturer.
On the other hand, the package may not contain a charger at all. This option will be optimal primarily if a compatible memory device is already available, and there is simply no need to overpay for a second device. In addition, the absence of a charger will be appreciated by those who want to choose this accessory separately, without relying on the manufacturer’s decision.
- Charging station. Cordless robotic lawnmowers (see Type) may be supplied with a charging station. Such units independently return to the base after completion of work or when a low battery level is detected. Automating the charging processor allows robotic lawn mowers to operate autonomously and makes them more convenient to use. Typically, a charging station contains a “parking” platform (base plate) and special docking contacts for replenishing energy reserves in the battery cells. The base can serve as a place to store the lawn mower during periods of inactivity, and in advanced implementations, the charging station is integrated with smart control systems, making it possible to control the operation of the lawn mower through mobile applications (see “Control from a smartphone”).
Please note that the above list is not complete - other additional items may be included in the kit.The device is powered
by two batteries at once.
For battery models in general, see above. And this feature means that due to its high power characteristics, a single standard battery is not enough for a lawn mower.
