Volume
The nominal volume of the sprayer tank. Usually, in this case, the working volume is indicated, and not the full capacity (“for the cork”).
The more capacious the sprayer is, the more work can be done with it without refueling. On the other hand, a large volume accordingly affects the price, dimensions, and most importantly, the weight of the unit (and not only in a filled, but also in a “dry” state). Therefore, even with large volumes of work, it is sometimes more rational to use a relatively small unit, refueling it several times.
Detailed recommendations on the optimal volume of the tank for a particular situation can be found in special sources. With regard to specific values, in the most compact manual sprayers (see above), the capacity
does not exceed 2 liters. Tanks for
2.1 – 5 liters can be found both in hand-held devices, and in pump-action and battery models (see "Type") with a shoulder carry. Sprayers for
5.1 – 10 liters are almost all made shoulder-mounted, the capacity of gasoline units actually
starts from 10 liters, and the most capacious modern sprayers have tanks
of more than 15 liters.
Max. pressure
The maximum operating pressure of the sprayer.
High pressure allows to achieve good spraying performance and range, however, actual performance can vary with units with the same pressure. Therefore, in general, the indicator is for reference (the lion's share of models has a
pressure of 3 bar and
4 bar, and it is only possible to compare different models by it approximately. When choosing, it makes sense to focus on more practical characteristics — performance, range, etc.
Max. fluid temperature
The maximum fluid temperature that the sprayer can safely handle.
The preparation process of some formulations requires heating; therefore, data on the temperature to which the liquid must cool can be very important for safe operation. However, even in the most heat-resistant sprayers, this figure does not exceed 40 °C; such a liquid feels warm to the touch.
It is worth remembering the temperature limits when the unit is in the sun: if the tank has had time to get very hot in the sun, you should let it cool down before starting work.
Spray wand length
The length of the spray tube supplied with the sprayer.
A long tube, on the one hand, allows you to reach far without leaving your seat and without using stools, ladders, etc.; on the other hand, it is not very manoeuvrable and can be inconvenient when working in tight spaces. When choosing, it is worth proceeding from the optimal compromise between these characteristics. For example, a large tube length (up to 2 m in some models) is useful when processing fruit trees, but for a greenhouse it is better to choose a shorter sprayer. It is also worth considering that some sprayers use telescopic (sliding) tubes, the length of which can be adjusted as needed; in such cases, the unfolded size of the atomizer is usually indicated.
Tip material
The material from which the complete spray tip is made.
The most common tip material is plastic, which is used in the vast majority of atomizers. Therefore, this parameter is specified only in cases where the tip is made of another, more advanced material. One of the most popular of these options is
brass — it is noticeably more expensive than plastic, but much stronger and more durable.
Voltage
Nominal voltage of the battery used in the battery sprayer (see "Type").
In general, a higher voltage is needed to provide high power. At the same time, the characteristics of models with the same battery voltage may differ markedly. Therefore, in fact, this parameter may be required to search for a replacement battery rather than to select a sprayer and compare it with other models.
It should be noted that modern sprayers usually use batteries of standard voltage — 6 V, 12 V or 18 V. At the same time, most models are 12-volt, 6 V is found mainly in low-cost devices of a small volume, and 18 V is found in powerful professional equipment.
Capacity
Capacity of the complete battery in the battery sprayer (see "Type").
A higher capacity allows you to work longer without recharging, but this is true only “ceteris paribus” — the actual energy consumption (and therefore battery life) depends on the performance, range and some other characteristics of the sprayer. Therefore, only devices with similar indicators can be compared by this parameter, and it is easier to evaluate battery life by directly claimed operating time (see below). Also, larger batteries tend to weigh more and cost more. Therefore, manufacturers usually choose the battery capacity according to the features of a particular model — in order, on the one hand, to ensure good battery life, and on the other hand, not to greatly increase the weight and price.
Operating time
Time of continuous operation of the battery sprayer (see "Type") on one battery charge. The actual operating time may differ slightly from the claimed one due to the specifics of a particular situation, however, these differences are usually not very large, and this indicator can be used to evaluate not only theoretical, but also practical indicators of battery life.
Replaceable nozzles
The ability to change nozzles — sprayer working nozzles.
Different nozzles differ primarily in terms of spraying distance and width of the plume, as well as the degree of spraying (particle size). In addition, specific nozzles can be used in sprayers — for example, for working with powder. Replacement nozzles are usually included in the delivery, but this point (as well as the range of nozzles) is still worth clarifying separately.
