Size
The size of the overhead shower head supplied in the set (see "Complete set"). For round watering cans, this paragraph indicates the size, for other shapes - the length (the largest of the two main sizes).
The larger the overhead shower - the more space it covers, the easier it is to "fit entirely" under the jets and the higher the throughput can be (see "Water consumption overhead shower"). On the other hand, the cost of a watering can directly depends on the dimensions. As for specific figures, the size
up to 20 cm is relatively small, although such watering cans are very popular due to their availability and low consumption. Models
21 - 25 cm can be classified as medium,
26 - 30 cm - relatively large, and the largest watering cans for the overhead shower have dimensions
of more than 30 cm.
Jet settings
The number of
jet settings provided in the complete manual or hygienic watering can (see "Complete set"). However, hygienic leukemias are usually made
single-mode - this is quite enough considering the application. But in conventional manual waterjets can be several, which allows you to change the characteristics of the jet at the request of the user - for example, instead of the usual thin jets, turn on a hard jet from a single large nozzle or a solid «soft» Flow from water filled with air bubbles. The specific set of settings can be different, it is worth to refine separately. However, in any case, the more options - the wider the choice of the user and the more complicated and more expensive the watering box itself.
Hose length
The length of hose for the shower head be supplied with a shower system of one type or another (see above). In most modern models, this parameter is about 140 - 160 cm - it is enough that even a tall man could easily rinse completely, from the top. In addition, some hoses can stretch 20-30% of their original length. So in practice, it is worth paying attention to the length of the hose except in special cases - for example, if the system is bought for a very spacious bathroom and you need a shower with an increased «radius of action».
Tap type
—
Double lever. Classic version with two separate swivel taps, one of which is responsible for hot water, the second - for cold. The advantages of twin-valve mixers are simplicity, reliability and accuracy of temperature setting. On the other hand, they are less easy to adjust than single-piece.
—
Single lever (joystick). One lever capable of moving in two planes is responsible for all adjustments in such mixers. When moving in one plane (usually right-left) the temperature is adjusted in the other (up-down or from itself - on itself) - pressure. In addition, such a mixer allows you to «remember» a certain variant of temperature - it is enough to close the water without moving the lever in another plane. But tuning accuracy in such models may be lower than in two-valve.
—
Thermostatic. Mixers equipped with a thermostat - a mechanism for maintaining a constant temperature of water at the outlet. This is the most advanced and convenient option, but expensive. It is enough for the user to choose the desired temperature (in degrees) and pressure, and the thermostat will automatically adjust the proportion of hot and cold water. There are models both classic with swivel regulators and
thermostatic with button (read more about the button below).
—
Buttoning on. Typ
...e of mixers controlled by pressing a button. This way a certain amount of water is supplied, which helps to save money.
— Single-valve. A variety found in hygiene kits (cf. «Type»). In fact, such a device is not a mixer, but simply a tap designed only to open and close the water. The idea behind this design is that only cold water is often used for hygienic showers, for which one valve is sufficient.
