Form factor
The form factor of a computer case characterizes, first of all, the internal volume. Main PC Form Factors:
—
Midi Tower. A representative of the tower family (tower cases) of medium size — about 45 cm in height with a width of 15-20 cm, with the number of external bays from 2 to 4. Most popular for middle-class home PCs.
—
Mini Tower. The most compact "vertical" case type, with a width of 15-20 cm, has a height of about 35 cm and (usually) less than 2 compartments with external access. Used mainly for office PCs that do not require high performance.
—
Full Tower. The tower case is one of the largest form factors for PCs today: 15-20 cm wide, 50-60 cm high, with up to 10 externally accessible bays. Most often in this form factor running advanced high performance PCs
—
Desktop. Enclosures designed for installation directly on the desktop. They often have the possibility of horizontal installation — in such a way that a monitor can be placed on top of the case — although there are also models that are installed strictly vertically. Anyway, "desktop" models are relatively small.
—
Cube Case. Cases having a cubic or close to it shape. They can have different sizes and are intended for different types of motherboards, this point in each case
...should be clarified separately. Anyway, such cases have a rather original appearance, different from traditional "towers" and "desktops".RAM
The amount of random access memory (RAM, or RAM) that came with your computer.
The overall performance of the PC directly depends on this parameter: ceteris paribus, more RAM speeds up work, allows you to cope with more resource-intensive tasks, and facilitates the simultaneous execution of numerous processes. As for specific numbers, the minimum volume required for the stable operation of a general-purpose PC nowadays is
4 GB. Smaller amounts are enough for microcomputers and thin clients, and at least
8 GB is installed in gaming systems, on the contrary.
16 GB and even more so
32 GB are already very solid volumes, and in the most powerful and performant systems there are values \u200b\u200bof
64 GB and even more. Also on the market you can find configurations
without RAM at all — for such a device, the user can choose the amount of memory at his discretion; for a number of reasons, this configuration is especially popular in nettops.
Note that many modern PCs allow for an increase in the amount of RAM, so it does not always make sense to purchase an expensive device with a large amount of "RAM" — sometimes it is more reasonable to start with a simpler model and expand it if necessary. The possibility of upgrading in such cases should
...be clarified separately.Drive capacity
The volume of the main drive supplied with the PC. For models with combined storages (for example, HDD+SSD, see "Drive type"), in this case, the main one is considered to be a more capacious hard drive; and if there are two HDDs in the kit, then they usually have the same capacity.
From a purely practical point of view, the more data the drive holds, the better. So the choice for this indicator rests mainly on the price: a larger capacity inevitably means a higher cost. In addition, we recall that SSD-modules in terms of gigabytes of capacity are much more expensive than hard drives; so you can only compare carriers of the same type by the combination of volume and cost.
As for the specific capacity, a volume of
250 GB or less in modern PCs can be found mainly among SSDs. Hard drives of this size are almost never found, for them a capacity
of 250 to 500 GB is still considered quite modest.
501 – 750 GB is a pretty good value for an SSD, and among them it is also mainly used.
751 GB — 1 TB is an impressive figure for an SSD and an average for hard drives,
1.5 – 2 TB is a very solid capacity even for an HDD. And a very high capacity —
more than 2 TB — paradoxically, is found even among pure SSDs: such drives are installed in high-end worksta
...tions, where speed is no less important than capacity.5.25" compartments
Number of 5.25" bays on the front of the PC.
One of the most popular ways to use such bays is to install DVD and Blu-ray drives, but they can also accommodate other components: “pockets” for removable HDDs and SSDs, card readers, and even specific devices like cooler control units. Accordingly, the more compartments, the more peripheral devices you can simultaneously install in your computer. However an abundance of 5.25 "peripherals is not often required in fact; on the other hand, it is recommended to install some types of devices not in a row, close to each other, but through a slot — for sufficient cooling efficiency. Therefore, most often the number of compartments of this type does not exceed 4 , but in some configurations it can be as high as 10.
3.5" compartments
Number of 3.5" bays on the front of the PC.
Do not confuse such slots with internal bays of the same form factor (see above): in this case, we are talking about seats for peripherals accessible from the outside. A card reader can be cited as an example of such peripherals — it is these devices that are most often installed in 3.5" bays on the front panel. However, in general, there are few components for such slots, so there are rarely more than 2 slots themselves — if they are available in the design at all .
USB 3.2 gen1
The number of full-size
USB 3.2 gen1 connectors(previously labeled USB 3.1 gen1 and USB 3.0) provided on the front panel of the PC.
USB is the most popular modern interface for connecting peripherals. And the number of connectors is, accordingly, the number of devices that can be simultaneously connected to the front panel without the use of splitters. As for version 3.2 gen1, it has speeds up to 4.8 Gbps). USB 3.2 gen1 connectors are also compatible with USB 2.0 peripherals. Thus,
2 or more such connectors are often provided on the front panel at once.
Separately, it is worth noting that similar ports are most often available on the back of the case. However, the front panel is closer to the user, the connectors on it are optimally suited for peripherals that need to be connected and disconnected frequently, such as flash drives.
PSU power
The power of the power supply installed in the PC.
Theoretically, if you buy a ready-to-use computer, the power of the block installed in it is guaranteed to be enough for the normal operation of the system. However, even in such cases, it's ok to pay attention to this parameter: other things being equal, a more powerful PSU provides an additional margin in case of high loads and emergency situations. And if the system is bought understaffed (for example, without RAM or a drive), or it is planned to be upgraded (especially with the installation of “gluttonous” components like a discrete graphics card), you should definitely clarify whether the PSU has enough capabilities for this. The power of the power supply should definitely not be lower than the power consumption of the system, and ideally it should exceed it by at least 100 – 150 W — again, in case of unforeseen situations.
Also, this parameter must be taken into account in some situations when catering — for example, when calculating the total load when connecting a computer to an uninterrupted power supply (UPS).