Model
Model of the pickup (cartridge) supplied with the player. The pickup is one of the most important parts of any vinyl player, the quality of the received sound largely depends on its quality. Knowing the name of the model, you can find detailed data on it and determine how satisfied you are with this particular cartridge.
Output level
The signal level at the output of the pickup supplied with the player is, in fact, the power of the signal coming from the pickup to the phono stage. This parameter is necessary, first of all, in cases where the player is planned to be connected to an external phono stage: such equipment must be designed for the corresponding power of the signal coming from the pickup.
Downforce
The force of pressing the needle on the plate, which the complete pickup (cartridge) is designed for.
This force depends on the rigidity (compliance) of the needle: the greater the clamping force, the harder the cartridge, respectively, the less pliable it is. It is also believed that less pressing force wears out the record less, but it cannot be said that "light" cartridges are definitely better — there are many other nuances. So in fact, information about the pressing force of a complete pickup is needed mainly in case of its replacement. Usually, the pressing force provided by the arm of the turntable is regulated within these limits, so the new cartridge must also be rated for the same values of downforce — otherwise there is a chance that the turntable will not be able to correctly align.
Model
Model of the tonearm — the movable lever on which the pickup is attached — supplied with the turntable. The tone arm is responsible for the correct position of the needle and the accuracy of its movement along the grooves, which is critical for sound quality. Therefore, many music lovers try to clarify not only the general data on the tonearm, but also its specific features in each particular “turntable”; in order to be able to find this information, the name of the tonearm is given in the characteristics.
Shape
Shape of the complete tonearm (viewed from on top). Modern players can have both
straight and
S-shaped or
J-shaped tonearms. It is impossible to say unequivocally which one is better: the advantage of the first option is considered to be light weight, the second and third are long length and low resonant frequency, which reduces the likelihood of interference. Therefore, in practice, the choice depends on the specific situation and personal preferences.
Tonearm effective length
The effective length of a tonearm in set is the distance from the attachment point (axis of rotation) to the stylus.
This indicator is important primarily for rotary tonearms: the longer the length, the lower the angular error, the smaller the discrepancy between the direction of movement of the track and the longitudinal axis of the pickup (for more details, see “Type”) and the lower the level of corresponding distortion. In addition, a longer length reduces the resonant frequency and reduces the likelihood of distortion. On the other hand, a longer tonearm turns out to be heavier, which requires certain technical tricks and can also negatively affect the purity of the sound. Therefore, a large length is not always a guarantee of high quality – you should also pay attention to weight (see below).
Drive unit
A method of transferring rotation from an electric motor to a disc player.
—
Belt. Also known as "passion". In accordance with the name, such a drive uses a belt drive. Its main advantages are the uniformity of rotation combined with undemanding to the quality of electric motors, which makes it possible to achieve good sound purity even with relatively simple and inexpensive motors. It is true that passive players pick up speed more slowly and are unsuitable for special techniques like scratching; however, these moments are critical only for DJs, and in normal listening to music they do not really matter. But of the unambiguous shortcomings, one can only note the need for periodic (usually once every few years) replacement of the belt.
—
Direct. In turntables with this type of drive, the disc is mounted directly on the motor shaft. This allows for very fast acceleration and deceleration, as well as the use of various special tricks, making direct drive a DJ turntable almost a must. However, such a design puts forward special requirements for the quality of electric motors, since. any irregularities and vibrations noticeably affect the sound quality. Therefore, direct drive is rarely used in "audiophile" models — in the absence of obvious advantages over belt transmission, the design turns out to be noticeably more expensive.
Speed control
A method for switching the disc rotation speed provided in the player.
—
Manual. This option is only found on belt driven models (see above). It provides the transfer of the belt to another pulley, due to which the gear ratio and, accordingly, the rotation speed change. This method is not as fast and convenient as automatic, however, it allows you to do without unnecessary electronic circuits (many audiophiles appreciate this feature, because additional electronics can interfere and degrade sound quality).
—
Electronic. Speed switching, carried out by changing the parameters of the electric motor — usually, the user just needs to press a button or move the regulator. This method is much faster and more convenient than mechanical, and for direct drive models (see above) is generally the only possible option. However, the electronics responsible for switching the speed affect the cost of the player and can become a source of additional interference; however, the latter can be compensated by installing control circuits in an external power supply (see below).
Phono stage
A phono stage is a specially designed preamp used with vinyl record pickups. Initially, the sound on such records was recorded with a distortion of the amplitude-frequency characteristic, namely, with an increase in volume from low frequencies to high ones; this is due to the technical features of the recording process. Accordingly, the phono stage not only amplifies the signal to a level sufficient to supply power to the amplifier, but also corrects the frequency response, “pulling out” the bass and reducing the volume of the high frequencies. And the
built-in phono stage allows you to connect the player to the power amplifier directly, without the use of intermediate equipment. However according to the characteristics, the built-in preamplifiers-correctors are inferior to external ones. Therefore, in some models with this function
, bypass mode may be provided, which allows you to send a signal bypassing the built-in phono stage to an external, more advanced one. And also there are even
vinyl players without a phono stage.