Comparison portable Speakers

— Bluetooth. Wireless technology for transmitting sound from mobile phones, tablets, etc. Allows you to connect the device wirelessly at a short distance from the signal source. Bluetooth quality and general features vary by version:

Bluetooth4. Each version brings improvements over the previous one. So in version 4.0, three standards were actually combined: traditional Bluetooth, a high-speed channel and an energy-saving mode for small amounts of data. This allowed us to optimize channel usage and battery consumption. In version 4.1. noise immunity has been improved when working near 4G LTE modules. And version 4.2 introduced mostly general speed and security improvements.

Bluetooth 5.0. One of the most important innovations of the Bluetooth 5.0 standard was the expansion of the BLE (Bluetooth Low Energy) mode: if necessary, the device can increase the range by reducing the speed, or speed up transmission by reducing the range. In addition, a number of improvements have been introduced regarding the simultaneous operation of several connected devices.

— Bluetooth 5.1. A significant upgrade of version 5.1 was the ability to accurately position the transmitter (receiver) of the signal. If previous versions could only determine the distance, then version 5.1 is able to determine the direction. Thus, na...vigation began to function better and more accurately, which improved the work with the smart home system, searching for connected devices, etc. In addition to this, the improvements again touched on saving energy consumption and simultaneously working with several connected devices.

— Bluetooth 5.2. The next, after 5.1, is the Bluetooth 5th generation update. The main innovations in this version are a number of security improvements, additional power optimization in LE mode, and a new audio signal format for synchronized parallel playback on multiple devices.

— Bluetooth 5.3Bluetooth v 5.3 wireless protocol was introduced at the dawn of 2022. Of the innovations, it accelerated the process of negotiating the communication channel between the controller and the device, implemented the function of quickly switching between the state of operation in a small duty cycle and high-speed mode, improved the throughput and stability of the connection by reducing susceptibility to interference. In case of unexpected interference in the Low Energy mode of operation, the procedure for selecting a communication channel for switching is now accelerated. There are no fundamental innovations in protocol 5.3, however, a number of qualitative improvements are seen in it.

—Mini-Jack (3.5 mm). Standard Aux input for connecting speakers to an audio source such as a laptop or smartphone.

— USB. The presence of a USB connector allows you to connect a USB flash drive, mobile phones, MP3 players and other similar peripherals to portable acoustics. Accordingly, such models have a built-in player and allow you to use connected gadgets exclusively as a drive.

— Card reader. Like the USB described above, this item implies the presence of a built-in player in acoustics. And the card reader also allows you to use memory cards as a drive on which songs will be recorded.

— FM receiver. A built-in tuner that allows the speaker system to work as a full-fledged FM radio receiver — this is the range that is popular among music radio stations (in particular, due to the ability to broadcast sound in stereo).

— Mono. The simplest type of acoustics is a single-channel audio system equipped with one speaker. Of course, there is no question of any volume of sound.

— Stereo. Acoustic system equipped with two speakers responsible for the left and right channels. Allows you to create a minimal illusion of "surround" sound by simulating the displacement of the sound source in the space in front of the listener.

— 2.1. A system of two stereo speakers that create a minimal illusion of "surround" sound, and a subwoofer that provides powerful and rich sound at low and ultra-low frequencies.

A band is a certain part of the frequency range reproduced by the acoustic system. In single-way acoustics, only universal speakers are used that are responsible for the entire operating range. The presence of several bands means the use of specialized speakers, “sharpened” for certain frequencies: for example, in two-way speakers, separate high-frequency “tweeters” are most often provided, and in three-way speakers, frequencies are divided into low, medium and high.

For different frequencies, the optimal speaker design will also be different; thus, the multi-band design allows to achieve better sound quality. On the other hand, single-way speakers are lighter, more compact and less expensive.

Ability to work portable acoustics in power bank mode. This mode is only found in models with their own batteries (see "Power type"): it allows you to use this battery to power a smartphone or other external gadget. Thus, acoustics can play the role of an additional external battery, which is important in situations where it is not possible to charge a portable device in time.

Note that Power Bank speakers may only be compatible with certain phone models; this point should be clarified before buying.

Portable audio devices for playing music from famous brands of power tools. First of all, such models are notable for their good dust and moisture protection, since their main use is construction. Such devices usually have an FM receiver with an external antenna for reliable reception of radio signals through walls and partitions; less often, you can connect to them via Bluetooth or access an audio library from a memory card. The power of a construction radio is quite enough to “shout out” a working tool. The devices can be powered from the mains or from proprietary brand batteries that are compatible with other power tools.

The main material used in the construction of the hull.

— Plastic. Inexpensive and at the same time very convenient material for portable acoustics. Plastic easily accepts a variety of colours and complex shapes; the latter not only gives space to designers, creating speakers of unusual design, but also allows you to apply various tricks to improve sound quality. In addition, this material is not afraid of moisture. It is believed that the strength of plastic is not very high, but this disadvantage is easily compensated by the large thickness of the material or the use of special impact-resistant grades. Therefore, plastic is found in all categories of speakers, from low-cost to high-end and from "home" to extreme, designed for an active lifestyle and frequent outdoor use.

— Metal. The metal gives the speakers a solid and expensive appearance, and on the practical side, this material is remarkable primarily for its high strength. At the same time, it is much more expensive than plastic — also due to the fact that manufacturers have to use shock-absorbing inserts and other tricks to avoid an unpleasant "metallic" coloration of the sound; and the mentioned strength is most often not critical. Therefore, metal cases are much less common than plastic cases, mainly in rather expensive portable acoustics.

— Silicone. Relatively soft and ela...stic material, not afraid of moisture. Suitable for creating dust, moisture and shock-proof speakers; in addition, it is convenient for models with suction cups (see above) — the part of the body that has the appropriate shape can play the role of a suction cup directly. At the same time, silicone has no other noticeable advantages over plastic, so its use is limited to specific models of portable acoustics.

— Rubber. For a number of reasons, rubber is considered well suited for models with dust and water protection, almost all speakers made of this material are protected. In addition, due to the softness of the rubber provides good shockproof properties.

— Wood. Wood is considered the optimal material for speaker cabinets in terms of acoustics. However, the specificity of portable speakers is such that this moment is not decisive in this case, and the main advantage of wooden cases over others (primarily plastic ones) is their aesthetic appearance, with characteristic colours and patterns. In addition, many consider wood a more pleasant to the touch and “natural” material. But this option does not have any special practical advantages, despite the fact that it is quite expensive. As a result, portable speakers with wooden cases are rare — they are mostly designer models created based on the original design.