Comparison StarLine AS96 BT 2CAN+2LIN GSM vs StarLine A96 2CAN+2LIN GSM GPS

Communication format of an alarm installed in a car with a key fob or other device used for control.

— One- way communication. With this type of connection, the user can only send commands from the key fob to the alarm system — opening and closing the car, turning off a triggered alarm, etc. Communication in the opposite direction through the key fob is not available, the sound and light signals of the car itself are responsible for the notification — a horn, a siren, flashing headlights, etc. Single-sided models are inexpensive and available, but are not well suited for situations where the car is out of sight / hearing — for example, when storing a car in a parking lot far from home or in a garage.

— Two -way communication. Models that allow communication in both directions — both the transmission of commands from the key fob to the alarm, and the sending of various notifications from the alarm to the key fob. In addition, this communication channel can be supplemented with a GSM module (see below). Anyway, two-way communication provides many advantages and additional features compared to one-way communication. For example, at a later time, you can turn off the siren so as not to disturb others, and at the same time, you are guaranteed to receive alarm signals; when the siren is turned on, duplicating the alarm signal on the key fob allows you to unambiguously determine what your c...ar is “screaming”; etc. The main disadvantage of bilateral models is the higher cost.

— Keyless. This category includes all models of car alarms that do not involve the use of key fobs at all. One of the most popular options in such devices is control from a mobile phone, via a GSM module; such communication is generally similar to two-way communication (see above), it is described in more detail in the paragraph “GSM-module”. In addition, labels can be used (see "Functions"), as well as buttons directly on the ignition key; the first option assumes one-way communication (also see above), and the second can work both in one and in both directions. The specific combination of these communication methods in different models is made different, and it is on this combination that the features of controlling the “signaling” largely depend.

The presence of a GPS satellite navigation module in the alarm design.

By itself, such a module is only responsible for determining the current geographical coordinates of the alarm (and, accordingly, the car in which it is installed), but the further use of such data depends on the alarm model and the capabilities that it provides. GPS data can be used, in particular, for classic navigation (via the on-board computer, advanced radio, etc.), as well as for searching for a stolen car (in beacon mode).

— Service mode (Valet). A special mode of operation in which all signals and warnings are turned off, however (in some models) the ability to control car locks through the alarm remains. This function is convenient when using the services of service stations, car washes and other services, when completely “legal” effects on the car can be perceived by the alarm system as signs of intrusion and cause false alarms. When the system is in Valet mode, the driver does not have to leave the control key fob to the service centre personnel, which minimizes the possibility of signal scanning.

— Management of a regular key fob. The ability to control alarm functions using a standard key or vehicle key fob.
Modern cars and other vehicles are equipped with more and more complex electronic systems, and to control these systems, a regular key or key fob is often used. The same key/trinket can be used to control the car alarm. Of course, the specific functionality of such models can be different, it's ok to clarify it separately. The same applies to the compatibility of the signaling with a specific key or key fob — different manufacturers may use different communication standards, and it will not hurt to clarify the support of this standard by the selected "signaling" separately.
The main advantages of this function are, first of all, that it reduces the number of key fobs used to control the function...s of the car, and at the same time allows you to use all the "chips" of standard key fobs / keys that were originally provided by the manufacturer. In addition, branded key fobs and keys are purely subjectively liked by many drivers due to the presence of symbols of a particular car brand.

— Management of windows. Possibility to control the windows of the car through the car alarm. Thanks to this function, the driver can raise and lower the windows of the car remotely, from a key fob or other control device. This feature can be useful, for example, if the car is already closed, but the windows are not fully raised: instead of disarming the car and getting to the power window control buttons, you can simply give a command from the key fob.

— Management of the opening of the boot. The ability to control the opening of the boot of the car through a car alarm, from a key fob or other control device. This function, usually, allows you to open and close the boot without disarming the doors (and other areas of the car) and without entering the passenger compartment. This is more convenient, and sometimes even safer, than working with the boot in the usual way.

— Locking doors when driving. Possibility of automatic locking of car doors at the beginning of the movement. This feature reduces the risk of a car being seized by force when intruders get into the passenger compartment by simply opening unlocked doors — for example, while stopping at a traffic light. Of course, the central lock can be closed from the driver's seat and manually; however, you can forget about it, while automatic closing works without driver intervention.

— Panic mode. The presence of the "Panic" mode in the alarm system allows the driver to manually turn on the alarm — with a siren, light signals, engine blocking, etc. This feature can be useful if the driver sees suspicious people at his car — in order to frighten off potential hijackers — as well as in other situations when you need to draw the attention of others to the car. In addition, in the absence of the "Search for a car" function (see below), a short-term activation of the "Panic" mode can play its role.

— Function "Polite backlight". Alarms with the function of "polite lighting" are able to control the interior lighting, providing the driver and passengers with additional comfort. For example, when the doors are opened, the lighting can turn on, facilitating placement and orientation in the cabin, and when you start moving and close the doors with the ignition off, it can go out. Turning the light on and off is often done smoothly, avoiding abrupt transitions and making it easier for the eyes to get used to it.

— "Take me home" feature. With this function, the alarm can control the headlights so that they (when the engine is turned off) do not turn off immediately, but after some time after pressing the switch and closing the door. Thus, you can use car headlights to illuminate at night — for example, if you need to walk from the car to the entrance in a dark courtyard on uneven asphalt. The time for turning off the “seeing off” headlights is most often about half a minute — this, usually, is quite enough for the purposes described.

— Function "Search vehicle". This function consists in the fact that, at the command from the key fob, the alarm system gives several short signals (light or sound, and in silent security mode — only light), signaling the driver about the location of the car or motorcycle. This can be useful, for example, in a large parking lot of a hypermarket or an entertainment complex, where the vehicle can get lost among other cars, and searching for it “manually” (especially if you need to carry purchases or roll a cart at this time) can be quite tedious.

— Hands Free function (label). This function allows the driver to control the alarm without using the key fob. A special tag is responsible for managing the operating mode, which the driver needs to carry with him, and a sensor system that responds to the approach and distance of the tag. Thus, when a person with a tag moves away from the car at a certain distance, the alarm is automatically armed, and, having noticed the appearance of a tag within the range of the sensors, it is removed. This format of work allows the driver to keep his hands free and not be distracted by the key fob; in addition, communication between the system and the tag is minimal, making scanning nearly impossible.

— Autostart on the voltage of the onboard network. Possibility of using an alarm to automatically start the engine in case of a significant drop in battery voltage. This situation may arise, in particular, when the car is idle for a long time, especially in cold weather. A dead battery is not only fraught with problems when starting a car: car alarms are often powered from it, so when the charge is exhausted, the car can be left unguarded. To avoid this, this possibility is provided: having fixed a voltage drop close to critical, the alarm starts the engine for a while, recharging the battery from the auto generator and preventing the described troubles. It should be noted that the use of this function is associated with certain restrictions and precautions; for more details about them, see above, in the paragraph “Autostart by temperature”.

— Function "call the driver". This feature allows a person at or inside the car to signal a call to the driver's key fob. Note that the call button is most often installed in the cabin, based on passengers; however, an external location may also be provided, allowing the driver to be called even with the car closed. In the latter case, the installation location of the call sensor is usually marked with a sticker with the appropriate inscription, for example, “Knock three times to call the driver”; and the call method is chosen in such a way that the alarm system can clearly distinguish it from an attempted opening or accidental impact on the car. However, this feature is only found on models with two-way communication (see "Communication Type"). In this case, we are talking about a separate call signal, and not about a general alarm signal, which allows the driver to more accurately assess the situation (and saves his nerves). “Calling the driver” can come in handy, for example, in a situation where the passenger remaining in the car felt unwell, or if the car had to be put in such a way that it blocks the exit of other vehicles. In the latter case, conscientious drivers leave a note with a mobile phone number on the glass, but with this function, you can do without a note — the main thing is that the range of the key fob is enough.

— Bluetooth Smart. This function allows the user to use a smartphone with a special application as a key fob to access the car. At the same time, in accordance with the name, communication is carried out via Bluetooth, due to which such authentication works even in the absence of mobile communication (for example, in an underground garage). The convenience of such alarm control is obvious: you do not need to carry an additional item (keychain or tag) with you, and the probability of forgetting your smartphone somewhere is much lower than the probability of not taking the same keychain with you. At the same time, the probability of interception of the control signal, according to the manufacturers, is practically zero. And in some models, owner authentication and disarming can be carried out completely automatically when the smartphone approaches a certain distance. Other functions (such as transmission of diagnostic data) can also be implemented via Bluetooth Smart, depending on the model. The main disadvantage is that Bluetooth Smart alarms are very expensive. In addition, this technology is far from compatible with every smartphone, this point needs to be specified separately.

— Diagnostics of malfunctions. The ability to use alarms to diagnose various failures and malfunctions. In different models, the implementation and capabilities of this function may be different. Most often, this function involves at least self-diagnosis: the alarm “interrogates” the sensors with service signals and, if one of them fails, notifies the user about this. However, more extensive possibilities may also be provided — such as obtaining data from the car's own sensors (for example, about a decrease or complete disappearance of battery voltage). This not only allows you to monitor the technical condition of the car, but also provides additional security — for example, a decrease in the level of gasoline in the tank may be a sign that it is being drained.

The maximum distance at which the ability to control the alarm from the standard key fob remains. In other words, this is the greatest distance from which the driver can give the system a control signal. This parameter should be distinguished from the reception range (see below): due to their small size, transmitters in key fobs are made relatively low-power, and the control range from the key fob inevitably turns out to be less than the signal reception range on the key fob (if the latter is provided at all in this model).

When choosing by this parameter, note that the control range is indicated for perfect conditions — that is, line of sight with a minimum of interference. The actual “range” of the key fob will inevitably be less, especially in the face of an abundance of obstacles. At the same time, modern car alarms most often have quite impressive range indicators. Thus, a distance of less than 500 m is considered rather small in this sense; 500 – 750 m is the average value, 750 – 1000 m is above average, and in some models a range of more than 1 km is claimed.

The maximum range at which a regular key fob in a two-way system (see "Type of communication") can receive signals from the central signaling unit. In other words, this is the greatest distance at which the driver can receive notifications from the alarm in the car on the key fob.

When choosing according to this indicator, note that the control range is indicated for perfect conditions — that is, line of sight with a minimum of interference. The actual "range" of the system will inevitably be less, especially in the face of an abundance of obstacles. At the same time, the main signaling units can be equipped with fairly powerful transmitters that can effectively “reach” key fobs over long distances. Thus, the claimed receiving range usually turns out to be on average twice the control range (see above), and even in relatively simple models it can exceed 1 km.

The display is one of the most convenient ways to display various notifications; it can work with almost any kind of visual information that is relevant for modern car alarms. Simply put, the display can show both numbers (for example, data from the autorun timer, see "Functions"), and text (for example, the inscription "Call"), and graphic data (such as a car diagram showing the status of each zone protection). Thanks to this, key fobs with screens are well suited for even the most versatile and advanced alarm systems; However such versatility also affects the price.

Note that this feature is found only in models with a two-way type of communication (see above) — it simply does not make sense to equip a one-sided key fob with a display.

This function is completely similar to the vibration signal used in modern mobile phones. Its purpose is to give signals in conditions in which sound notifications are undesirable or ineffective. As an example of such conditions, in particular, lectures and other events where it is supposed to turn off the sound, or noisy environments (concert halls, clubs, etc.), where the vibration of the key fob in your pocket is felt better than the squeak of its dynamics, can be cited.

The delivery set includes, in addition to the main alarm unit, it can also include additional elements, including a CAN bus, a LIN bus, a blocking unit, an immobilizer, a limit switch, a volume sensor, an interior temperature sensor, an inclination sensor, a movement sensor, a boot opening relay, siren. More details about them:

— CAN bus. The ability to connect the alarm to the car's electronic CAN bus. Many modern car models are equipped with such a tyre (and their number is constantly increasing); it allows you to receive information from the car's own built-in sensors about the status of its various parts, from the opening of the doors and boot to the position of the gear knob and the readings of the speedometer and tachometer. To date, connecting a car alarm to the CAN bus is the most convenient option, because. does not require intervention in the standard wiring of the car and greatly simplifies the process. Note that the module itself can be either built-in (in such cases, the CAN connection is standard) or external. In the absence of a CAN module in the kit, usually, it...can be purchased separately, but this is more difficult and troublesome than immediately acquiring a CAN-compatible signaling.

— LIN bus. The alarm can be connected to the vehicle's LIN bus. Integration with the LIN machine interface allows the security system to control and interact with some of the car's original functional systems. This can be an engine preheating system, a climate control system, etc. The LIN (Local Interconnect Network) interface combines the peripheral and secondary functional systems of the car, but it is impossible to control the operation of the engine or transmission through it. The main systems of the car are controlled via the CAN (Controller Area Network) interface.

— Lock block. Availability of the block of blocking of the engine in a complete set of delivery of the alarm system. Such a module, when triggered, blocks the engine or another element of the car (for example, the starter), preventing the attacker from leaving the car. Activation can occur by triggering an alarm or by pressing the "Anti-Hi-Jack" button (see "Security and Protection"). There are two main types of blocking block — with normally closed contacts (NC) and normally open (NO). In the first case, the blocking relay is de-energized in the normal state, and when the alarm is triggered, it becomes energized and opens the circuit. This option is convenient in that if the alarm fails, the machine will not be blocked, but the reliability of the NC from the point of view of safety is somewhat lower than that of HP. In turn, the blocker with normally open contacts is switched on if the voltage on the control relay is lost. Disabling such a system is somewhat more difficult (especially if the control is carried out via the CAN bus), however, in the event of a failure in the auto or alarm electronics, the car remains stationary. Some alarms provide universal blocking blocks that allow the owner to choose the format of operation — NO or NC — at his discretion.

— Immobilizer. Immobilizers are electronic devices designed to prevent the movement of a car in the event of illegal entry into it. Immobilizers can have different designs and areas of influence: for example, some open the starter or ignition circuit, others turn off the fuel injection controller, others send a control signal via the CAN bus (see CAN module), putting the entire system into an “inoperative” state. The immobilizer can be disabled by the driver using a key, tag, secret button, code, etc. Such devices, in fact, insure the main alarm in case of its failure or hacking: even if an attacker manages to get into the car, he will not be able to steal the vehicle. This is the difference between immobilizers and the blocking systems described above — they can work even when the alarm is "silent". Note that immobilizers are distinguished by a high degree of secrecy. So, a well-installed module is carefully hidden from prying eyes, its operation is often disguised as a malfunction (for example, a dead battery is simulated), and some models do not work immediately, but some time after the start of movement. The latter increases the likelihood that the attacker will be in a stalled car in the open and hide without trying to complete the theft. Immobilizers are installed in many cars as standard equipment, directly at the factory, however, the degree of safety of such equipment is low, and many motorists prefer to supplement it with non-standard devices. Of course, in the absence of an immobilizer, you can buy it separately, but this is more troublesome than buying a ready-made kit.

— Antenna module. The presence in the delivery set of the signaling of a separate block containing an active antenna. Such a unit greatly enhances the range of the transmitter, allowing you to receive notifications from two-way alarms (see "Type of communication") at a distance of 1 km or even more. Also, a driver call button or sensor is often installed on the antenna module (see "Functions").

— Limit switch. The presence of a limit switch (one or more) in the car alarm delivery set. The most popular application of limit switches is as sensors that monitor the opening of doors, boot, hood, gas tank cap, etc.: in the closed position, the door or lid presses the switch, and when opened, it releases it, to which the alarm reacts. Note that many modern cars are equipped with their own limit switches — for example, in the doors; they are normally responsible for turning on the lighting in the cabin, but alarms can also be connected to such switches. At the same time, firstly, attackers usually know the location of standard "limit switches" and can block them without any problems, and secondly, there are car models without such switches. Having separate limit switches, you can install them at your discretion, including in non-standard and most unexpected places for the hijacker.

— Volume sensor. The presence of a volume sensor in the delivery set of car alarms. Such a sensor works on the principle of a sonar: it periodically emits an ultrasonic signal and analyzes its reflection, thus “observing” objects in the cabin, and when the situation changes, it gives an alarm. In this way, protection is provided against "silent" penetration into the car — for example, with cutting glass, to which shock sensors and limit switches do not respond: the volume sensor will detect an intruder not noticed by other systems. There are also external sensors that monitor the situation around the car; when triggered, they do not turn on the main alarm, but give a relatively quiet signal, designed mainly to warn a person who has approached close that the car is on an alarm. The ability to connect such sensors is available in many modern car alarms, however, sensors are rarely included in the delivery set. So if you want to immediately get a system with such a function, without buying additional equipment, you should choose among the models that are initially supplied with volume sensors.

— Temperature sensor in the cabin. The presence of a sensor that monitors the temperature in the cabin, in the alarm package. This feature provides additional information to the driver, allowing him to assess the conditions in the cabin directly from the alarm key fob, without opening the car or approaching it, and take action if necessary — for example, leave the house a few minutes earlier to warm up the interior for a comfortable ride. In addition, the temperature sensor can also serve as an intrusion warning: for example, in cold weather, opening doors or windows leads to a sharp decrease in the temperature in the cabin, which can be noticed even if the intruders were able to open the car without triggering an alarm.

— Tilt sensor. As the name implies, the tilt sensor detects changes in the slope of the car body. Thus, for example, the system "takes care" that the wheels are not removed from the car. After all, to do this, you need to slightly raise the body. If a car thief decides to do this, then the tilt sensor will instantly detect manipulations with the body and immediately raise the alarm. The tilt sensor is one of the main sensors in many security systems for cars and motorcycles. Such a sensor can be found both in low-cost car alarms and premium security systems.

— The displacement sensor captures any mobility of the car: the car drives on its own, it is moved by a loader or in tow, it shifts from impact or rolls back due to a weak hand brake, etc. Having fixed the fact of the car’s mobility, the sensor activates the alarm. Often used in conjunction with a tilt sensor.

— Boot opening relay. The presence of a boot opening relay in the car alarm delivery set. If the car has an electric boot drive, you can connect it to this relay and control the opening / closing of the boot through the alarm key fob — this is much more convenient than pressing the button in the cabin every time.

— Relay with block. The presence of a relay with a block in the car alarm delivery set. This relay is used to connect additional external equipment to the alarm system — for example, a limit switch under the gas tank cap; the block also serves to attach the relay to the body of the car.

— Siren. The presence of a siren in the car alarm delivery set. The siren in this case is a sound warning unit that provides for the supply of characteristic sound signals. Note that such a unit is not always included in the delivery set, and if it is not available, you either have to buy the siren separately or connect the alarm to the horn. So if you want to immediately buy an alarm with your own sound signal, you should clarify the configuration of the selected model.