Dark mode
Укр|Eng|Рус
Ukraine
Catalog   /   Kids & Toys   /   Baby Care   /   Baby Bottles & Sippy Cups

Comparison Medela 800.0400 vs Medela 008.0114

Add to comparison
Medela 800.0400
Medela 008.0114
Medela 800.0400Medela 008.0114
Compare prices 3
from 1 774 ₴
Outdated Product
TOP sellers
out of stock
Typefeeding bottlesfeeding bottles
Volume80 ml150 ml
Age0+0+
Shapeclassicclassic
Materialsiliconeplastic
More features
measuring scale
measuring scale
Teat materialsilicone
Flow ratevariable
Added to E-Catalogjanuary 2017december 2016

Volume

The working volume of the bottle is the amount of liquid for which it is designed. If you fill it “under the cork”, a little more drink can fit inside, but this is still undesirable.

The volume is selected by the manufacturer, taking into account the age the product is designed for and what type it belongs to (see above). So, for newborns, 100 – 200 mL is most often enough, in the category "from 6 months" there are already models for 300 – 400 mL, and for older children (from 3 years old) drinkers of 500 mL or more are produced, similar to flasks of "sports » appointments for adults. All these values are quite justified from the point of view of science. So when choosing, you should focus mainly on the “age category” and type of bottle, and only then — on its volume; especially since models of the same class and in terms of capacity do not differ much.

Material

The main material from which the container is made. In drinking bowls and thermal drinking bowls (see “Type”) the cover is usually made of the same material, although there are exceptions (see “Nipple material”).

- Plastic. Plastic combines lightness, low cost, versatility and practicality, making it the most popular material for children's dishes. It can have any color, be made transparent or translucent, and is well suited even for vessels of rather complex shapes; moreover, it does not get cold on the hands (which is especially important if the container is held by the child himself). In addition, plastic is safe from impacts and falls - it does not break; and when squeezed, such a container is more likely to flatten than crack. It is worth considering that the composition and properties of this material may be different - for example, not all containers are suitable for hot drinks or sour juices, and cheap, low-quality types of plastic may be unsafe for health. Therefore, before purchasing a plastic product, it does not hurt to clarify the characteristics of the material and make sure that it has safety certificates (all this data is available in the instructions and other documentation of the manufacturer). However, in children's dishes of normal quality, everything is usually in order with safety. But one of the obvious disadvantages of plastic is the difficulty in cleaning: in particular, it cannot be rubbed vigorously and washed with “harsh” produc...ts, which makes it difficult to remove old dirt (for example, if the remains of milk formula have dried to the walls), and not everyone can tolerate hot water similar containers.

- Silicone. A material that looks like transparent plastic, but most often it is soft. Such a container may be more pleasant to the touch for a child than hard plastic; liquid can be “squeezed” out of it if necessary. In addition, silicone is considered absolutely safe, it does not cause allergies and can easily withstand high temperatures; such dishes can even be boiled. On the other hand, these advantages cannot be called key, and this material costs somewhat more than plastic. Therefore, it is used much less frequently.

- Glass. The main advantage of glass over transparent plastic is its hardness and, as a result, scratch resistance. Thanks to this, the dishes, firstly, can easily withstand even “hard” washing with (abrasive powders, metal brushes, etc.), and secondly, they retain their presentation for a long time (while plastic becomes cloudy over time from minor scratches and abrasions) . We also note that glass is a hypoallergenic material, does not emit harmful substances and can withstand high temperatures, incl. boiling water. On the other hand, a strong impact can break a glass container, and sharp fragments are unsafe for a child. Therefore, you should be especially careful with such dishes.

- Metal. The main advantage of the metal is its high strength. On the other hand, this material is opaque, cools your hands when touched (although in hot weather this can be an advantage) and does not hold the temperature of the contents well (however, thermal drinking cups do not have this drawback, see “Type”). Most metal containers are designed for the oldest age group (from 36 months), some for children from 12 months.

Teat material

The material from which the nipple in the bottle is made (see "Type"). Also, the material can be specified for spouts (see “Liquid Delivery”) if they look like nipples.

Silicone. Synthetic material, in many respects considered more advanced than latex. So, silicone nipples tolerate boiling without problems, have no taste and smell and are completely hypoallergenic (the risk of an allergy to this material is zero). At the same time, this material is noticeably stiffer than latex, and not every child likes such a nipple; Yes, silicone is more expensive.

Latex. Elastic material of natural origin, the main advantages of which are flexibility and softness. And latex nipples are cheaper than silicone ones. However they are less durable, but most often this difference is not noticeable. Some consider this material to be as “natural” as possible, but natural origin has a downside: children who are prone to allergies may develop this allergy to latex. However, the likelihood of such troubles is extremely small, and in general, this material is still considered hypoallergenic. But from the unequivocal disadvantages of latex, one can name a peculiar smell and taste (which the child may not like), as well as sensitivity to high temperatures, which is why such a nipple cannot be sterilized in boiling water.

Flow rate

The rate of fluid flow provided by the nipple on the bottle.

The flow rate should not be too high or too low. In the first case, the baby will choke and choke (which in itself is not good, besides, it can cause belching and colic), and if the feeding is too slow, it can be naughty. However, in general, low speed is more preferable than high speed. Therefore, you should select a model according to the flow rate as follows: start with a slow one, and then, as necessary, transfer the baby to a medium one, and then to a faster nipple.

Note that containers with adjustable flow rates are produced — they are somewhat more expensive than usual, but more versatile and can be used in all age categories.
Price graph