Comparison Bort BMW-200-P vs Skil 1470 LA

The vibration frequency of the working head, provided by the tool in the renovator or delta grinding mode (for more details on the modes, see "Replaceable heads"). For different types of work and different materials, the optimal frequency values \u200b\u200bwill also be different; therefore, when choosing, it is worth consulting the reference literature or a specialist and making sure that the selected model will provide the required number of oscillations.

In some models, this parameter can be adjusted - this makes the tool more versatile.

- Reverse. Possibility to change the direction of rotation of the working nozzle of the tool. The use of reverse depends on the type of tool and the type of work for which it is used. For example, when drilling, this function can be useful for releasing a jammed drill. And in screwdrivers (see "Interchangeable heads") a change in the direction of rotation is almost mandatory - otherwise it would be impossible to switch the tool from twisting to loosening and vice versa.

- Speed controller. The ability to smoothly change the speed of movement of the working nozzle (frequency of rotation or vibration). The adjustment itself is used to adjust the tool for different types of materials and work - for different cases, the speed is different. But smooth tuning is good because it allows you to set the required speed as accurately as possible - there are no strictly fixed adjustments in such models, and the operator can choose any option from minimum to maximum. True, a certain skill is required for the effective use of such a tool, but this problem can hardly be called serious even for beginners.

- Maintain momentum. A function that allows you to maintain a constant speed of rotation of the nozzle, regardless of the load on it. Without special adjustment, at a constant engine power, the rotational speed inevitably drops with increasing load and increa...ses with a decrease. And the revs control system monitors the resistance on the nozzle and, if necessary, changes the power in such a way that the rotation speed remains constant. This has a positive effect both on the quality of work and on the service life of the nozzles and the entire tool.

- Soft start. The moment of starting is one of the most difficult in the operation of any electric motor. When the power is connected directly, in the first moments after the start, a high power flows through the windings, which leads to voltage surges in the network; in addition, the beginning of the movement occurs very abruptly, and this is fraught with jerks of the instrument, with the risk of releasing it from the hands with corresponding unpleasant consequences. The soft start function reduces the described troubles, if not to zero, then to a minimum: special circuits limit the starting power and ensure a soft and safe start of movement.

- Brushless motor. The presence of a brushless (brushless) motor in an electric tool. Such motors are noticeably superior to traditional collector motors in terms of efficiency, which makes it possible to significantly reduce energy consumption without sacrificing power; this is especially important for cordless tools (see "Power Source"), where this feature is predominantly found. In addition, brushless motors are less noisy and generate virtually no sparks during operation, making them ideal for working in high fire hazard environments. Their main disadvantages are traditional - the complexity of the design and high price.

— Backlight. The tool has its own lamp to illuminate the place of work. This feature is especially useful when working in low light conditions or in hard-to-reach areas that are otherwise difficult to illuminate. Note that in this case, it is the embedded system that is meant; some models may be equipped with portable lights as separate units, but such lights do not count as lights.

- Display. Own display in the design of the multifunctional tool is designed to visualize customizable parameters, display the battery charge level and display all sorts of related information. The specific implementation of the screen depends on the level of functionality of a specific instrument model.

- Connecting a vacuum cleaner. Possibility of connecting the vacuum cleaner directly to the tool. For this, a special pipe is usually used, one end of which is led to the place of processing, and the actual hose from the vacuum cleaner is connected to the other. Thanks to this, the work becomes much “cleaner”; True, the vacuum cleaner is far from always 100% able to remove sawdust and other waste, but in any case, it at least simplifies subsequent cleaning. The hose nozzle is usually made removable - this allows you to reduce the overall dimensions of the tool in cases where the vacuum cleaner is not needed or is not within reach. Note that before buying a model with this function, you should pay attention to its compatibility with the specific vacuum cleaner that you plan to use.

— Keyless replacement of nozzles. The presence of a clamping tool in the design that allows you to replace working nozzles without using a key. There are many varieties of such clamps, differing in the procedure for use, but they all have one thing in common: the work with the mount is carried out by hand, without the use of keys or other additional devices.

Types of nozzles supplied with the tool.

— Delta platform. Grinding nozzle with a characteristic triangular shape. It is an obligatory element of equipment for tools with the function of a delta grinder (see "Interchangeable heads"), however, it is also often found in renovators (see "Device").

— Segmented disk. A nozzle in the form of an "incomplete" disk — a circle that has no segment. Such a nozzle is only suitable for processing using vibration, and therefore it is found exclusively in tools with a renovator function (see "Device", "Interchangeable heads"). At the same time, the shape of the nozzle allows you to work with both the front and side parts, which gives you freedom of manoeuvre.

— Chaber. A scraper usually means a plate of a rectangular (or close to it) shape. Such a nozzle is one of the most popular in renovators (see "Device", "Replaceable heads") due to its versatility: it is suitable for scraping, cleaning surfaces, cutting, etc. In addition, the scraper is traditionally used as a regular nozzle for electric chisels .

— Saw blade. Specialized nozzle for sawing various materials. Its design and method of operation may vary depending on the specifics of the tool: for example, in electric jigsaws (see "Replaceable heads") the saw blade is designed to move back and for...th and looks like a characteristic strip, in renovators it looks like a narrow plate, etc. .

— For stitching seams. Nozzle for processing joints between tiles, bricks, etc. to give them a neat appearance. It is worth considering that the shape of the jointing can be different (convex or recessed, straight or rounded, etc.), respectively, and nozzles for such work can have a different shape; specific features should be specified separately for each instrument model.

- Sheets for grinding. Sheets for grinding and polishing stone, wood or metal products on a special plate with fastening to the executive body of a multifunctional tool. They often have a triangular shape; sandpaper or diamond coating is used as the material for their working surface.

Note that these are far from all types of nozzles that modern universal tools can be equipped with, but only the most popular ones. In addition to them, other devices may be included in the kit — for example, a variety of sanding sheets. And the “set of nozzles” option is indicated for tools (mainly engravers, see “Device”), the equipment of which includes several dozen devices; in some models, this number may exceed one and a half hundred.

The noise level produced by the tool during operation. For comparison, 50 decibels roughly corresponds to the noise in an office room, 60 dB to an average TV volume, 70 dB to a truck at a distance of about 8 m, 80 dB to traffic noise, 90 dB to a loud scream.

The lower the noise level, the more comfortable the use of the tool. At the same time, note that this parameter is usually indicated very approximately — the actual “loudness” of operation can vary markedly depending on the mode, the nozzle used, the material being processed, etc.

The length of the network cable can tell you how far from the outlet you can operate the device. Therefore, for domestic use, it is more relevant to choose models with a short cord, for construction work or use in production, in the garage a longer cable is better.